Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Highlands, TX
Gate repair in Highlands, TX comes down to three things: the soil, the weather, and the age of the subdivision. Most gates here sit on clay-heavy ground that shifts with every wet-dry cycle, which slowly pulls hinges out of square and binds rollers against their tracks. Homes in Highlands range from 1960s ranch-style lots on generous acreage to newer construction near the San Jacinto River, and the gate setups differ just as much. We’re Carver Gate Repair, and we handle gate repair, gate installation, and gate motor repair in Highlands under one standard: a written price before any work starts, background-checked technicians on every call, and a guarantee in writing on every repair. Call (469) 530-2485 and a live person answers, day or night.
Why Highlands Homes Are Different
Highlands sits on the east side of Harris County along the San Jacinto River, and that location shapes the gate work we do here more than any brochure ever will. The soil is expansive clay, the kind that swells after heavy rain and contracts during dry spells. That movement transfers into gate posts, which is why we see more out-of-square gates and sagging hinges in Highlands than in areas with sandier ground. A gate that swings freely in March can drag against the latch post by August, not because the gate failed, but because the ground underneath it moved.
Many Highlands homes were built in the 1960s through 1980s, which means a fair share of original gate hardware is reaching the end of its service life. We also see plenty of newer installations on the larger lots along Wallisville Road and near the river, where homeowners want driveway gates with electric operators and vehicle detection loops. The humidity here does its own damage: corrosion on hinges, swollen wooden gate panels, and control boards that fail from moisture intrusion inside the operator housing. No two Highlands gates wear out exactly the same way, but the patterns are consistent enough that we know what to look for before we ever open the truck.
Some subdivisions in Highlands have deed restrictions that govern gate height, material, and finish. If you’re planning a new gate, that paperwork matters before the first post hole gets dug. We’ll review what your HOA or property records require and factor it into the written quote, so there’s no surprise at the permit stage or after installation.
Our Main Highlands Services
Most calls from Highlands homeowners fall into two categories: a gate that won’t open or close properly, and a motor that’s stopped responding. Each service has its own page with pricing, timelines, and what to expect.
Gate Repair in Highlands
Highlands gate repair usually means one of a few things: a gate dragging on the ground from soil movement, a bent hinge or roller, a latch that no longer lines up, or a sagging gate leaf that puts strain on the motor. We start by measuring the gap at the hinge posts and the latch side, then correct what the clay soil has moved over time. On wooden gates, the humidity here can swell panels enough to bind them against the frame, and that often means planing or re-mounting rather than replacing the whole gate. For a closer look at how we diagnose and price these jobs, see Gate Repair in Highlands.
Gate Installation in Highlands
New gate installation in Highlands starts with the ground, not the gate. We’ll check the soil condition at the post locations, account for drainage patterns on your lot, and size the posts for the gate’s weight and swing direction before anything gets ordered. Highlands lots often have the room for a sliding gate on a track, but a swing gate may be the better fit where the driveway grade changes near the road. Either way, the steel or aluminum is cut and the hinges are set specifically for this property. Read more at Gate Installation in Highlands.
Gate Motor Repair in Highlands
Gate motors in Highlands take a beating from humidity and the occasional river-bottom fog that rolls through. The most common failures we see are control boards shorted by moisture, limit switches that have drifted out of adjustment, and gearboxes that have stripped from running against a misaligned gate. We service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry common repair parts for those brands in our trucks. Details on what we check and what replacement costs look like are on Gate Motor Repair in Highlands.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highlands
We work on nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Highlands technicians carry common boards, limit switches, and capacitors for these systems locally, so most motor repairs don’t wait on a parts order. You can see the full breakdown on our brands page.
Pricing for Gate Company in Highlands, TX
| Service | Typical range in Highlands |
|---|---|
| Gate alignment and hinge adjustment | $145 – $295 |
| Gate wheel or roller replacement | $165 – $265 |
| Welded gate frame repair | $240 – $520 |
| Wooden gate panel replacement | $290 – $640 |
| Sagging gate leaf correction | $180 – $350 |
| Chain-link fence gate repair | $120 – $260 |
| Gate latch and lock replacement | $95 – $220 |
| Limit switch replacement | $130 – $250 |
| Control board replacement | $260 – $570 |
| Gearbox or arm replacement | $300 – $660 |
| Full swing gate operator replacement | $1,100 – $2,400 |
| Sliding gate motor replacement | $1,150 – $2,500 |
What pushes a Highlands quote toward the upper end of these ranges is usually the condition of the posts and the ground around them. A gate that’s been dragging for months has already worn its hinges and rollers past simple adjustment, and correcting that takes more labor than the part price suggests. Whatever the number is, you’ll see it in writing before any work begins. The price we quote is the price you pay, no exceptions at the door.
Neighborhoods We Serve in Highlands
We run calls across all of Highlands, from the older lots along Wallisville Road to the river-adjacent properties near the San Jacinto and the subdivisions off of FM 2100. Typical response time for a Highlands gate repair call is same-day or next-morning, depending on when you call and what parts the job needs.
- Highlands proper, including the original townsite
- Homes along Wallisville Road and Needlepoint Road
- Properties near the San Jacinto River and River Terrace
- Subdivisions off FM 2100 and Crosby-Lynchburg Road
- Acreage lots on the eastern edge of Highlands
Service Area – Cities Near Highlands
Beyond Highlands, our crews cover the surrounding east Harris County communities, including Channelview, TX, Baytown, TX, La Porte, TX, and Deer Park, TX. Dispatch and scheduling are coordinated from our Houston office, but the technicians who show up at your gate are assigned to the Highlands area and know the local soil conditions and hardware patterns.
Serving Highlands, TX – Our Local Coverage Area
We’re based in the Highlands area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highlands
Most Highlands gate repair calls are scheduled same-day when they come in before early afternoon. A gate that won’t close is a safety and security issue, so we route those calls first. Call (469) 530-2485 and you’ll get a real person and a clear arrival window, not a voicemail box.
That depends on your subdivision. Some Highlands HOAs require written approval for gate material, height, and color before installation, especially on street-facing driveway gates. We’ll ask about deed restrictions during the estimate and include any compliance requirements in the written scope, so there’s no rework after the fact.
Yes. Highlands has everything from standard suburban driveway gates to wider farm-style gates on acreage lots, and we work on both. The pricing table above covers typical residential gates. If your gate is oversized, on a rural entrance, or built on uneven grade, we’ll quote it against the actual measurements, not a flat sheet.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highlands Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.