Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation Nationwide
A gate installation done wrong shows up fast: a sagging leaf, a motor that strains against misaligned tracks, a keypad that works when it wants to. Carver Gate Repair handles the entire job from footing to final programming, and we’ve done it since 2008 under The Garrison Standard. That means a written price before any work starts, a background-checked and uniformed technician on site, and a written guarantee on the finished job, good for a full year. If something isn’t right in those 365 days, we return and fix it at no charge. No argument, no second invoice. Call (469) 530-2485 and a live person answers, any hour, any day.
Automatic Gate Installation
Automatic gate installation means building a gate that opens and closes on its own, whether by keypad, remote, intercom, or vehicle sensor. The system includes a motor (called an operator), a power source, safety edges or photo eyes, and the gate itself, all working together. Carver Gate Repair handles automatic gate installation as a complete package: we set the posts, hang the gate, mount and wire the operator, then program remotes and keypads before we leave. Most automatic gate installation projects run from $4,800 to $16,000 depending on the gate size, operator type, and whether trenching for power is needed, and you can see our Gate Installation pricing breakdown before work begins. Every job gets a written price first, and the number doesn’t move once work begins.
Operators and Automation
We mount and wire swing, slide, and barrier operators from DoorKing, LiftMaster, Elite, and other major brands. The operator gets paired to keypads, remotes, and any existing access gear you want to keep. Wiring is run in conduit, not stapled along the fence.
Safety and Code Compliance
Every automated gate gets safety edges or photo eyes set to the gate’s travel path. We test the obstruction response before calling the gate done, because an automatic gate that doesn’t reverse on contact is a liability, not a convenience.
Gate Installation Services
Gate installation services cover everything from a single pedestrian gate to a full driveway system with automation and access control. Carver Gate Repair provides our Gate Installation in Los Angeles and beyond, covering the entire scope: demolition and haul-off of the old gate if needed, post setting, gate fabrication or ordering, hanging, motor mounting, wiring, and final programming. We quote gate installation services as a single written price, not as a base number with surprises added later. Typical projects land between $3,200 and $14,000 depending on gate width, material, and whether you’re adding an operator. You’ll see the full breakdown before we ever dig a hole or set a post.
Step By Step Scope
You’ll know exactly what’s included: materials, labor, haul-off, programming, and the year-long guarantee. Nothing is estimated verbally. The written price is the price.
Removal and Replacement
If an old gate or operator is coming out, we remove it clean and take it away. The site is left level, tidy, and ready for the new gate to go in the same day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric gate installation pairs the gate with a motor, power supply, and control system so it opens without anyone getting out of the car. Carver Gate Repair runs the low-voltage and line-voltage work in conduit, mounts the operator on a proper pad or post, and wires the safety loop or photo eyes so the gate will not close on a vehicle or person, following the standards outlined in The Complete Gate Installation Guide for Los Angeles Homeowners. Electric gate installation runs between $4,500 and $15,000 in most cases. The range depends on gate length, ground conditions, and the distance from your electrical panel to the gate. You get a written price before any trenching starts.
Power and Trenching
We handle the power run from your panel to the gate location, including trenching, conduit, and connections. Low-voltage and line-voltage wiring are separated to code. The work is inspected, then covered, then tested under a full open-close cycle.
Loop Detectors and Safety Edges
A loop detector tells the gate a vehicle is present by sensing metal over a wire loop buried in the driveway. Safety edges and photo eyes back that up. We install and test all three as standard on electric swing and slide systems.
Driveway Gate Installation
Driveway gate installation means a gate across the vehicle entry, built to your driveway width and set to swing, slide, or lift. Carver Gate Repair handles driveway gate installation from grade check to final remote programming. We measure the opening, check the slope and side clearance, set the posts in concrete, hang the gate, and mount the operator. Driveway gate installation typically costs $5,500 to $18,000 depending on material, width, and operator choice. Ground conditions and the distance from your panel to the gate post matter more than most people expect, and both show up in the written quote, not after the fact.
Swing and Slide Configurations
We’ll tell you straight whether your driveway suits a swing gate or a slide gate. A steep grade can rule out a slide gate unless a tall track is built. A short side yard can make a bi-fold swing the better choice.
Material and Fabrication
Steel, aluminum, and wood all have different weight and wind characteristics, and the operator has to match that load. We order or fabricate the gate to fit the exact opening, then pair it to an operator rated for the gate’s weight and cycle frequency.
Sliding Gate Installation
Sliding gate installation puts the gate on a track or cantilever system so it moves sideways instead of swinging into the yard. It’s the right call when space is tight or the driveway slopes upward past the gate. Carver Gate Repair installs both track roller and cantilever sliding gates, sets the receiver post, mounts the operator, and installs the safety loop or photo eyes. Sliding gate installation runs from $5,000 to $17,000 for most residential and light commercial jobs. The spread depends on gate length, whether a concrete track must be poured, and which operator you choose. All of it appears in the written price before the first post hole is dug.
Track and Cantilever Systems
A track roller gate rides on wheels along a ground rail, which must be kept clear of debris. A cantilever gate floats above the ground on rollers set into two posts, so snow or gravel never blocks it. We’ll recommend the right one for your grade and climate.
Operator Placement and Programming
We set the operator pad at the correct position relative to the gate rack or chain. Then we wire the loops, set the open and close limits, and program the remotes. The gate gets a full obstruction test before we call it finished.
Gate Opener Installation
Gate opener installation puts a motor and control board on an existing gate or a new one, so the gate opens with a remote, keypad, or intercom. Carver Gate Repair installs swing operators, slide operators, and barrier arm operators, then wires and programs the full control system. Gate opener installation typically runs $1,800 to $6,500 for the opener and labor, more if new power must be trenched to the gate. We work on LiftMaster, Elite, DoorKing, Mighty Mule, and other major makes, and we match the operator to the gate’s weight and use cycle. The written price covers the opener, mounting, wiring, and programming.
Operator Selection
A light aluminum gate does not need the same operator as a heavy steel one, and a gate that cycles fifty times a day needs a different duty rating than one that cycles four. We size the operator to the gate, not to a sales target.
Control Integration
Keypads, remotes, intercoms, vehicle loops, and smartphone controls can all be tied into the opener. We program everything on site, test each device, and hand you a working system rather than a box of user manuals.
Gate Fabrication
Gate fabrication is the building of the gate itself, whether a custom steel frame, an aluminum panel, or a wood gate with steel reinforcement. Carver Gate Repair fabricates gates to the measured opening, with the right hinges, stops, and hardware for the weight and wind load. Gate fabrication runs from $1,500 to $9,000 for a standard residential gate. Larger or custom designs may go higher, but you’ll see the number in the written quote before we cut a single piece of steel. We fabricate for strength first, then appearance, and the gate gets painted or powder coated against rust and weather.
Steel and Aluminum
Steel is heavier and stronger, best for wide openings and high wind areas. Aluminum is lighter, resists corrosion, and suits coastal environments. We’ll show you the cost difference and the maintenance difference before you choose.
Hardware and Reinforcement
A gate is only as good as its hinges, posts, and frame joints. We weld steel frames at the stress points, set hinges with grease fittings, and brace corners so the gate does not rack or sag in year three.
Brands We Service
We work on nine major gate motor brands, and our technicians train on the equipment, not around it. LiftMaster and Elite operators are among the most common we install and repair, and we stock their OEM parts so a control board or limit switch doesn’t mean a two-week wait. We know how their limit switches and control boards behave in the field, and we program them to the exact stroke of the gate they’re paired to.
DoorKing and Mighty Mule show up a lot on residential and light commercial jobs. DoorKing’s 9150 and 1601 series run long duty cycles if installed right, and Mighty Mule’s lighter-duty openers need correct thrust settings or they burn boards early. Whether you have one of those or any other make, we can match the operator to the gate and program it correctly the first time.
Signs You Need a Pro Right Now
- The gate strains against its own track or hinges. That grinding or shudder means the gate and operator are fighting each other. Left alone, the motor burns out, the rack strips, or a hinge tears out of the post.
- The gate reverses for no reason or won’t reverse at all. Safety edges and photo eyes are failing or misaligned. A gate that won’t stop for a car or a person is a hazard, and it needs a trained hand, not a guess.
- Water is pooling at the operator pad or post base. Water and line voltage do not mix. If the pad sits in water or the post base is soft, the foundation is failing and the operator is at risk.
- You’re keying in the code two or three times before it opens. The keypad, receiver, or control board is starting to fail. It’s cheaper to replace a board than to replace a gate after a forced entry.
- The gate sags enough to scrape the driveway. A gate that drags has already lost its structural support. The frame is bending, and the longer it runs, the more expensive the fix.
Our Process, Step by Step
- 1
Call and get a live person. You reach a real dispatcher, not a recording. We take your address, gate type, and what’s going on, then book a window that works.
- 2
Site measurement and written quote. The technician checks the opening, the grade, the power access, and the existing structure. Then you get a written price covering the full scope. The number is final before any work starts.
- 3
Post setting and gate hanging. Posts are set in concrete to the correct depth for the gate’s weight and wind load. The gate is hung, aligned, and checked for true before the operator is mounted.
- 4
Operator, wiring, and programming. We run conduit and wire to code, mount the operator, set limits and obstruction detection, then program remotes, keypads, and any access controls. Every device gets tested at the gate, not from the van.
- 5
Walkthrough and written guarantee. We walk the job with you, show you what was done and why, and leave you with the written 365-Day Done Right Promise. If it fails inside a year, we return and fix it at no charge.
How Much Does Gate Installation Cost?
Most residential gate installations run between $3,200 and $18,000 nationwide. A basic single swing gate without automation sits near the bottom of that range. A full driveway system with a fabricated steel gate, an Elite or DoorKing operator, trenching for power, and keypad controls lands near the top. The gate’s size and material matter, but so do ground conditions, the distance from your electrical panel, and whether the existing posts can be reused.
What drives the price up: long power runs, poor soil requiring deeper footings, custom gate designs, and access control extras like intercoms or vehicle loops. What keeps it honest: a written price that states the full scope before any work starts. You should never pay for a vague “time and materials” surprise. Our estimates are free, written, and binding once you approve them. If a contractor will not put the number in writing, that is the first red flag.
Call (469) 530-2485 and we’ll tell you what your project should cost, straight, before anyone schedules a visit.
Where We Work
Carver Gate Repair serves homeowners and businesses across the United States through local crews working to The Garrison Standard. Every location is independently owned and operated, and every location follows the same rules: written prices, background-checked technicians, and a full-year guarantee on every installation and repair. You get the same process and the same standards no matter which crew shows up.
Frequently Asked Questions About Gate Installation
Gate installation is the complete process of setting posts, hanging a gate, mounting an operator, running power, and programming controls. It can mean a simple manual gate or a full automated system with keypads, remotes, and safety devices. At Carver Gate Repair, every installation ends with a written guarantee good for a full year.
Most residential gate installations take one to three days on site, depending on the gate size, concrete work, and electrical trenching. Simple replacement gates can go in a single day. We’ll give you a clear timeline in the written quote so you know when vehicles can pass through again.
Nationwide, most gate installation jobs land between $3,200 and $18,000. A manual single gate without automation is the lowest cost. Automated driveways with custom fabrication and long power runs are the highest. You’ll see your exact number in writing before any work begins. Call (469) 530-2485 for a free estimate.
We work on nine major gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians are trained on each one and we stock OEM parts for the most common models. If your operator isn’t on that list, we can usually source parts and service it anyway.
We answer the phone 24 hours a day, every day, and we can often get a technician to your site quickly for urgent failures. Full installations are measured, quoted, and scheduled properly, so we don’t promise same-day installation. We do promise a written price and a definite arrival window.
Every installation is covered by the 365-Day Done Right Promise, in writing, for a full year from the date of service. If the gate, operator, or any part of our work fails inside that window, we return and make it right at no charge. That second visit is free, no arguments and no invoice chasing.
Clear the work area so the crew has room to move, remove vehicles from the driveway, and make sure any pets are kept inside during working hours. You don’t need to dig, move posts, or buy anything. We’ll handle the full scope and leave the site clean when the job is done.
Schedule Your Gate Installation Service Today
Call (469) 530-2485 and a live person answers, any hour, any day. Tell us what gate you need, and we’ll set up a free, no-obligation estimate with a written price before any work starts. Every installation carries the 365-Day Done Right Promise in writing. You’ll deal with a background-checked, uniformed technician from start to finish, and the number on your quote is the number on your invoice. No surprises.
Written by Lonnie Burke, Owner at Carver Gate Repair, working to The Garrison Standard since 2008.