Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lynwood, CA
Gate work in Lynwood runs into a few conditions you don’t see in other parts of Los Angeles County. The homes here are older, the lots are tighter, and many driveways sit close to the street with a short setback that pushes gates right up against the property line. That changes how a gate is framed, how the motor is mounted, and how fast a repair needs to happen. If your gate won’t open at 6 a.m. and the car is still inside, that’s a different problem than a gate that drags but works. We treat it that way. Call (469) 530-2485 and you’ll reach a live person, not a voicemail box.
Why Lynwood Homes Are Different
Lynwood’s housing stock was largely built between the 1940s and 1970s, and a lot of the original driveway gates from that era are still in place. Steel tubing set into concrete posts, often with a chain-link panel or welded bars, and a swing hinge that’s been carrying weight for forty years. The coastal climate holds moisture in the air year round, and that moisture works its way into hinge pins, limit switches, and control boards faster than in dry inland heat. We see more oxidation on gate hardware in Lynwood than in cities ten miles east, and that oxidation is usually what kills a swing operator before the gearbox actually fails.
Setbacks are another factor. On a street with a shallow front yard, the gate post often sits within a few feet of the sidewalk, which means the gate opens over a public easement or very close to one. That constrains the size of the gate, the swing arc, and where a motor can physically be mounted. A good installer in Lynwood has to account for city right-of-way rules and neighbor access before ordering hardware. It’s not a barrier, but it’s a real local consideration that a generic Los Angeles crew won’t think about until the post is already set.
Our Main Lynwood Services
Most calls from Lynwood homeowners fall into three buckets: a gate that won’t move, a gate that needs to be replaced outright, and a motor that runs but no longer controls the gate correctly. Here’s how each one works here.
Gate Repair in Lynwood
The most common Lynwood repair call is a swing gate that’s sagged on its hinges and drags against the concrete. Once a gate drags, the motor fights the extra friction every cycle, and eventually the limit switch or the capacitor overheats and fails. Our repair process in Lynwood starts with re-hanging the gate on new or shimmed hinges so it swings clean, then we test the operator under load. That order matters, because replacing a burned-out limit switch without fixing the sag just means another failure in a few months. For details, see our full page on Gate Repair in Lynwood.
Gate Installation in Lynwood
A new gate in Lynwood is rarely a one-size job. The lot width, the setback to the sidewalk, and the type of post already in the ground all shape what can actually be built. We measure the opening, check the right-of-way, and quote a written price before any materials are ordered. Some Lynwood homes need a custom-width steel gate to fit between two existing block pillars; others need new posts set in fresh concrete because the old ones are cracked. Every installation is quoted line by line so the number is fixed before the first hole is dug. See Gate Installation in Lynwood for the full scope.
Gate Motor Repair in Lynwood
If the gate itself moves freely but the motor stutters, runs backward, or stops mid-cycle, the problem is usually the operator or a control component. In Lynwood we see a lot of limit switch failures on older swing operators, plus loop detector issues on driveway sensors that have been patched over or flooded. We carry parts for FAAC, BFT, Linear, and Viking systems, and we diagnose the motor, the board, and the safety sensors in one visit rather than guessing and coming back. Our page on Gate Motor Repair in Lynwood covers the common failures and the repair process.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lynwood
We work on FAAC, BFT, Linear, and Viking gate motors in Lynwood, and we keep common control boards, limit switches, and remote receivers stocked locally rather than waiting on a distributor. For a full picture of the equipment we cover, see our brands.
Pricing for Gate Company in Lynwood, CA
| Service | Typical range in Lynwood |
|---|---|
| Gate repair (minor: hinge, latch, alignment) | $165 – $395 |
| Gate repair (major: structural weld, post reset) | $450 – $1,100 |
| Gate motor repair (limit switch, capacitor) | $185 – $420 |
| Gate motor replacement (operator only) | $650 – $1,400 |
| Full swing gate installation (single driveway) | $2,600 – $5,800 |
| Full slide gate installation (single driveway) | $3,200 – $7,000 |
| Loop detector replacement | $240 – $500 |
| Remote or keypad programming | $75 – $150 |
| Welded steel gate panel (custom width) | $900 – $2,400 |
Prices in Lynwood shift with the condition of the existing posts and the kind of motor already mounted. A rusty post that needs to be cut out and reset adds labor, and a niche-brand operator that requires a new board adds parts cost. What doesn’t move is the price we quote you: every job gets a written price before any work starts, and the number stays the same from the first visit through the final walk-through.
Neighborhoods We Serve in Lynwood
We run gate repair and installation calls across Lynwood’s residential streets, from the blocks around Imperial Highway and Long Beach Boulevard to the neighborhoods north of the 105 and south of Martin Luther King Jr. Boulevard. Most Lynwood homes are within a 25-minute dispatch window for us.
- Central Lynwood, around Lynwood High School and City Hall
- North Lynwood, near the 105 and Imperial Highway
- The residential streets off Long Beach Boulevard
- South Lynwood, toward the border with Compton and Paramount
- East Lynwood, near the 710 side
Service Area – Cities Near Lynwood
In addition to Lynwood, our crews serve the surrounding cities where homeowners face the same older-housing stock and tight driveway setbacks. We cover South Gate, CA, Paramount, CA, Huntington Park, CA, and Bell, CA. If you’re in one of those cities, each of those pages covers the local conditions and pricing in that area.
Serving Lynwood, CA – Our Local Coverage Area
We’re based in the Lynwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lynwood
For repair and motor calls, we typically have a crew in Lynwood within 24 hours, and often the same day if you call before noon. Installation and full replacement jobs are scheduled for a date and time window rather than dispatched, since those start with a site measure and a written quote. Call (469) 530-2485 and we’ll tell you directly what the current availability is, no scripted hold music between you and the answer.
Many Lynwood gate replacements don’t trigger a permit if you’re swapping a gate on existing posts. But if the job involves new footings, a wider driveway opening, or work close to the city right-of-way, the city may want a review. We’ll tell you at the site visit whether your job needs city approval and we handle the paperwork when it does, so you’re not left interpreting municipal code on your own.
Yes. A gate that won’t open or won’t close is an emergency repair call, and we dispatch Lynwood technicians around that. A new gate or a full motor replacement is scheduled with a set date, a written price up front, and a time window so you know when we’ll be there. Both routes go through the same phone line: (469) 530-2485.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lynwood Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.