Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Compton, CA
Carver Gate Repair is the gate company Compton homeowners call when a gate stops opening, a motor burns out, or a new gate needs to go in right the first time. Compton’s housing stock runs from mid-century single-family homes off Rosecrans to gated multi-unit properties along Wilmington and Alameda, and the gates here take real abuse: sun, salt air, and a lot of open-close cycles every day. We work on the gate, the motor, and the hardware as one system, and every job starts with a written price before any work begins. Call us at (469) 530-2485 and you’ll get a live person, not a voicemail box.
Why Compton Homes Are Different
Compton sits squarely in the Los Angeles Basin, which means gates here face a specific set of conditions. The marine layer pushes inland most mornings and burns off into dry afternoon heat. That cycle puts expansion and contraction stress on gate frames, welds, and hinges, and it accelerates rust on any bare steel that hasn’t been primed and painted correctly. Homes in Compton are mostly built between the 1940s and the 1970s, so many driveways are narrow and many gate posts are original to the property. We regularly see posts that have been set in concrete without proper depth, which is why a sagging gate in Compton is often a post problem, not just a hinge problem.
Compton also has a significant number of side-yard gates and rear-alley access gates, not just front driveway gates. Those gates tend to be lighter, but they get cycled constantly, and the hardware wears faster than anyone expects. Where a gate is the only barrier between the street and a back door, the hardware matters. A gate that won’t latch or won’t stay closed isn’t a cosmetic issue. It’s how a yard gets left open by accident. That’s why we check latches, closers, and catch posts on every job, not just the motor.
Our Main Compton Services
Most Compton calls come to us for one of two things: a gate that won’t open or close, and a gate motor that runs but doesn’t move the gate. Both are covered in detail on their own pages, linked below.
Gate Repair in Compton
Gate repair in Compton usually means one of three problems: a gate that sags and drags on the driveway, a gate that won’t stay latched, or a gate that’s been hit and won’t swing clean. We replace hinges, weld cracked frames where the steel is sound, reset posts that have pulled out of the ground, and straighten or replace the hardware that has worn past its useful life. A gate dragging on concrete in Compton is often a hinge-pin or post-anchor issue, not a whole-gate problem, and a good repair job catches that before it turns into a motor burnout. Full details on what a repair includes and what it costs are on the Gate Repair in Compton page.
Gate Installation in Compton
Gate installation in Compton starts with a tape measure, not a catalog. We check the driveway slope, the setback from the street, the condition of the existing posts, and whether the gate will swing or slide. A swing gate on a sloped Compton driveway catches on the high side unless it’s hung right, and a slide gate needs level ground or a proper track. We fabricate and hang steel gates to fit the actual opening, not a stock size, and we set the posts to match the soil, which in Compton is often dense clay that expands and shifts with rain. Get the full scope and pricing on the Gate Installation in Compton page.
Gate Motor Repair in Compton
When a Compton gate motor runs but the gate doesn’t move, or the gate opens partway and reverses, the problem is usually the limit switch, a stripped drive gear, or a loop detector that’s lost its signal. We diagnose these on site, using the correct parts for the brand already installed, and we explain what failed and why before we replace anything. In Compton, a common failure is a motor that draws power but can’t push a gate that’s become hard to move, which means the repair has to address the gate’s mechanical health, not just swap the motor. The Gate Motor Repair in Compton page covers the job and the typical cost.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Compton
Our Compton technicians carry parts for the brands most common on local properties: Viking, Ghost Controls, and DoorKing. That stock, plus same-week parts ordering for Elite, cuts repair turnaround for most gate motor jobs in Compton to one visit.
Pricing for Gate Company in Compton, CA
| Service | Typical Range in Compton |
|---|---|
| Hinge replacement | $185 – $420 |
| Gate wheel replacement | $150 – $350 |
| Gate post reset / reinforcement | $400 – $1,600 |
| Gate frame welding (per location) | $150 – $450 |
| Gate opener replacement | $500 – $1,200 |
| Gate motor replacement | $600 – $1,500 |
| Limit switch replacement | $150 – $350 |
| Loop detector replacement | $200 – $500 |
| Full gate system install | $2,000 – $5,500 |
What pushes a Compton gate job toward the top of those ranges is usually the post. If the original post is undersized or was set shallow, we have to dig it out, set a heavier post, and re-hang the gate, which takes the job from one hour to a half day. The other common driver is a gate that’s been binding for months, so the motor has worn itself out and the repair becomes a mechanical fix plus a motor replacement. Whatever the number on our quote, it’s the number you pay: the written price is agreed before we open a single panel.
Neighborhoods We Serve in Compton
We work across all of Compton, from the streets north of Rosecrans down to the blocks around Artesia, and everywhere between. Scheduling is done from our Los Angeles office, with crews dispatched locally to keep drive times short.
- Sunny Cove
- Richland Farms
- Lueders Park
- Compton Creek
- East Compton
Most Compton gate repair calls are scheduled within a couple of days; motor failures with a stuck-open gate are handled as priority same-day calls when a technician is available.
Service Area – Cities Near Compton
Beyond Compton, our crews cover the surrounding South LA corridor. Homeowners in Gardena, CA, Carson, CA, Lynwood, CA, and Paramount, CA get the same written-price policy and the same full-year guarantee on every repair.
Serving Compton, CA – Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Compton
Most Compton gate repairs are scheduled within two business days. A gate that’s stuck open or a motor that’s completely dead gets priority, and we work those in same-day whenever a technician is available in the area. A live person answers our phone line 24/7, including weekends, so you’ll know the schedule as soon as you call.
For most gate repairs and motor replacements on a single-family home in Compton, no permit is required. New gate installations on a new post, or any electrical run for a new motor, may need a city permit depending on scope, and we handle that paperwork as part of the job. We’ll tell you before any work starts if a permit applies.
Yes. We work on single-family gates, rear-alley gates, and multi-unit property gates across Compton, including swinging steel drive gates on apartment buildings. The pricing model is the same for every job: a written price before work starts, and a full-year written guarantee on the repair.
Contact Carver Gate Repair in Compton
If you have a Compton gate that won’t close, a motor that’s stopped responding, or an installation you want priced out, call Carver Gate Repair at (469) 530-2485. We answer around the clock, we quote before we work, and every repair is backed in writing for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Compton Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.