Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Compton
Gate installation in Compton runs $2,400 to $7,800 for most residential driveway gates, depending on the gate style, length, and whether you need a new automatic opener. A sliding gate on a 12 to 16 foot track is the most common installation we do here, and most jobs take two to three days from footing excavation to final reversal testing. We know the driveways here, the way water moves on them, and the soil under them. Call (469) 530-2485 for a free measure and a written quote before any work begins.
Scheduling and dispatch for our Compton crews is coordinated from the brand’s Los Angeles office. The technicians who show up at your gate are background-checked, uniformed, and trained on the equipment already common in Compton homes.
Why Carver Gate Repair Is Compton’s Preferred Gate Installation Company
Compton homeowners call us after dealing with the other kind of contractor. The one who quotes a number on the phone, then finds reasons to move it once the posts are out of the ground. We do not do that. Every Carver job, including every Gate Installation in Compton, carries a written price delivered before any work starts. That number holds. If it changes for any legitimate reason, you approve the change in writing before we proceed. That is the Garrison Standard, and it has been since 2008.
We are also the crew that answers the phone. Not a call-back queue, not a voicemail. A live person picks up 24 hours a day, seven days a week, including weekends and holidays. Lonnie Burke runs the Carver team to that standard. When a Compton homeowner calls at 9 p.m. because a gate came off its track and the car is stuck inside, the person answering knows what to ask and can dispatch the right technician.
The same standard applies to the finished job. Every gate installation and repair we do in Compton carries a written 365-Day Done Right Promise. If something is not right within a full year of the install date, we return and fix it. No charge. No argument. That promise is in writing on every single job.
Driveway Gate Installation in Compton
Driveway Gate Installation in Compton almost always starts with the footing. That is the part generic gate companies get wrong here, and it is the reason a gate that looked fine in September is sagging by March. Compton’s mid-century tract homes on raised foundations tend to have short, steep driveways that drain toward the street. Water pools at the low point, which is usually right where the hinge post sits. A footing poured to standard depth sits above the apron, in the wet zone. The post rots, the gate sags, and the problem repeats.
We set hinge post footings below the driveway apron depth and slope the concrete away from the post base. For a typical single swing driveway gate in Compton, expect to pay $2,400 to $4,200 including the gate, posts, hardware, and installation. A double swing gate runs $3,800 to $6,500. These are installed prices with the opener, safety edges, and reversal testing included.
Single Swing Gates
A single leaf swing gate works where the driveway apron is narrow or where a double gate would swing too wide for the setback. We weld the frame from steel or aluminum, hang it on adjustable hinges with sealed bearings, and set the post depth to the grading conditions on your street.
Double Swing Gates
Double gates spread the weight across two posts and two operators, which matters on the steeper driveways common south of Rosecrans. The operator on each leaf is synchronized so the closing speed stays consistent, and both leaves carry independent safety entrapment protection.
Sliding Gate Installation in Compton
Sliding Gate Installation in Compton is the better choice when the driveway has little set-back room for a swinging leaf or when the approach runs parallel to the street. A sliding gate rides on a steel track or a cantilever rail, and in Compton we see a lot of slide gates on the longer lots around El Camino College and along the industrial-facing edges of the city, east of the 710.
A typical 12 to 16 foot sliding gate with a rack-and-pinion drive and one operator runs $3,200 to $6,400 installed in Compton. Longer gates, heavier steel, or a need for a cantilever system without a ground track can push toward $7,800. The operator is mounted on a concrete pad set below grade, and the safety loop detectors are installed on both sides.
Rack and Pinion Drives
This is the drive we recommend for Compton’s flat and near-flat lots. A steel rack is bolted along the gate’s length, and the motor’s pinion gear walks the gate open and closed. It handles Compton’s occasional heavy rain better than chain drives, which stretch and rust faster in wet months.
Cantilever Gates
When the driveway crosses a drainage swale or a section of broken apron, a cantilever gate rides above the ground without a track. The gate hangs from rollers on posts set behind the opening, which keeps the track clear of Compton’s street runoff and debris. It costs more than a tracked slide gate, but it is the right call where a ground track would clog with silt.
Trusted Brands We Service in Compton
Carver technicians are trained on the operator brands already installed in Compton homes, so we stock parts and know the control board layouts before we arrive. We install and service Viking, DoorKing, and Elite operators most often in this area, along with LiftMaster, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. That means we match the right operator to the existing gate, the voltage on the property, and the access patterns of the household. If your Compton home has an older DoorKing on a slide gate that was installed in the 1990s, we can rebuild the existing operator or swap it for a new one with a modern loop detector and battery backup. Parts for these brands are stocked locally for fast turnaround in Compton’s service area.
Common Gate Installation Problems We See in Compton Homes
We see the same four failures over and over on Compton properties. All are avoidable with the right footing depth, the right operator placement, and the right safety testing.
- Hinge post footing above the driveway apron depth. Compton’s street grading sends water toward the low point of many driveways, which is often exactly where the post goes. A short footing traps the post in wet soil, the wood or steel degrades, and the gate starts tilting within two years.
- No loop detector or working photocell on an automatic gate. A gate operator without entrapment protection does not pass a UL 325 reversal test. On a Compton driveway where children play near the street, that is a serious liability. We test every installed gate with a 2×4 in the path, not just a quick visual check.
- Solar opener on a shaded lot. Compton’s older neighborhoods have mature street trees, especially around the blocks west of Central Avenue. A solar panel on a shaded gate picks up a few hours of weak sun, the battery never recovers, and the operator runs intermittently. We tell homeowners plainly when solar is not going to work on their lot.
- Ground track clogged with street runoff and debris. A sliding gate that sits in the path of Compton’s winter sheet flow collects silt, leaves, and small gravel in the track. The gate binds, the motor strains, and the gears wear out early. A cantilever design or a raised track fixes this for good.
Pricing for Gate Installation in Compton, CA
Here are the numbers we quote in Compton for complete installations, including concrete work, gate fabrication or assembly, operator, safety edges, and UL 325 testing:
- Single swing driveway gate: $2,400 – $4,200 installed
- Double swing driveway gate: $3,800 – $6,500 installed
- Sliding gate (12-16 ft): $3,200 – $6,400 installed
- Cantilever sliding gate: $4,500 – $7,800 installed
- Pedestrian gate: $900 – $2,100 installed
- Security gate with access control keypad and intercom: add $1,100 – $2,600 to the gate cost
These figures are for a standard residential installation in Compton, with normal soil conditions and power within 50 feet of the operator. Before any work begins, you receive a written line-item price. That is the number you pay. Call (469) 530-2485 for a free on-site measure and an exact quote for your gate.
We Also Serve Cities Near Compton
Our crews cover Compton and the surrounding South Bay cities, including Gardena, Carson, Lynwood, and Paramount. If your property sits near the city line, we still dispatch a background-checked, uniformed technician to your door with the same written pricing and 365-day guarantee. See our full Compton coverage area for details on response times and local scheduling.
Serving Compton, CA – Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Compton
We set hinge post footings 36 to 42 inches deep in Compton, which puts the base below the driveway apron depth and below the wet soil zone that Compton’s street grading creates on short, steep driveways. The footing is poured in a sonotube form, and the concrete is crowned so water sheds away from the post. This is deeper than the 24 to 30 inch footings we see on failed gates in this city. If you would like a specific depth for your driveway, call (469) 530-2485 and we will assess the grade during a free site visit.
Yes. Every sliding gate we install in Compton includes at least two layers of entrapment protection: a loop detector in the driveway on both sides of the gate and a safety photocell across the gate path. We run the full UL 325 reversal test with a 2×4 placed in the gate’s path before we call the job done. These safety components are not optional add-ons. They are part of the written installation price. Call (469) 530-2485 to schedule a measure and get your exact installation quote.
We can, but we will tell you plainly if solar is not the right fit for your lot. Many Compton neighborhoods, especially the older blocks west of Central Avenue and near El Camino College, have mature street trees that shade the sidewalk and front yard for much of the afternoon. A solar operator on a shaded gate runs a voltage deficit, and the gate eventually fails to open or closes halfway. Where solar will not work, we recommend a low-voltage AC operator with a battery backup instead. Call (469) 530-2485 and we will check your sun exposure during a free visit.
We install and service Viking, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, Ghost Controls, and Mighty Mule. On Compton properties, Viking and DoorKing are the two old-guard workhorses we see most often, and Elite operators appear frequently on newer sliding gates. We stock local parts for these brands so we are not waiting on a freight shipment when your gate is down. If you have an operator that is not on that list, we can still assess it and recommend a replacement that matches your gate.
Most driveway gate installations in Compton take two to three working days. Day one is excavation and concrete pour for the post footings and operator pad. Concrete cures for 24 to 48 hours. Day two or three is gate assembly, operator mounting, wiring, safety testing, and cleanup. We never promise same-day installation, because proper concrete cure time is not something you can rush. You receive a written schedule with your quote, and we stay in contact if weather or soil conditions change the timeline. Call (469) 530-2485 to book a free measure and get a start date.
Contact Carver Gate Repair in Compton
If you need a new gate in Compton, or if the one you have has been sagging through winter, call us. We will send a background-checked, uniformed technician to measure your driveway, check the grade and drainage, and hand you a written price before any work begins. That price is the price. The work is guaranteed in writing for a full year. Call (469) 530-2485 today to schedule your free estimate, or use the phone number for any gate emergency in Compton, any hour.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Compton homeowners with written pricing, background-checked technicians, and the 365-Day Done Right Promise.