Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Inglewood, CA
We repair, install, and service gates across Inglewood, and the work here is shaped by the city itself. Homes in neighborhoods like Morningside Park and North Inglewood tend to sit on compact lots where driveway gates serve double duty: security for cars parked close to the house, and a first line of defense for side-yard access. Salt air drifting in from the coast means we check for corrosion at hinge welds and motor housings more often than we would inland. If your gate is sagging, grinding, or refusing to open, call (469) 530-2485 and we’ll give you a written price before any work starts.
Why Inglewood Homes Are Different
The gate inventory in Inglewood is older and more varied than what you’ll find in newer inland developments. Many homes along Manchester Boulevard and La Brea Avenue still run their original swing operators, and Inglewood’s mix of Spanish-style and mid-century homes means gate frames are often custom-welded rather than factory-pressed. That’s fine for us because we fabricate onsite, but it also means a generic replacement part seldom fits. Loops cut into cracked driveway concrete break as the soil shifts through wet winters and dry summers. And because Inglewood sits under a flight path, sensor alignment goes slightly out more often, as the constant low vibration gives limit switches and loop detectors a harder life than they’d have in a quieter city. When we quote a repair here, we account for those conditions, so the written price you get is the price that holds.
Our Main Inglewood Services
Most calls from Inglewood come in as one of three problems: a gate that won’t open at all, a new gate that needs to be measured and installed, or a motor that’s failed. Each service has its own Inglewood page below with prices and the details that matter for this city’s homes.
Gate Repair in Inglewood
Inglewood gate failures tend to follow a pattern: the gate works fine until it doesn’t, and the warning signs were there for weeks. We see hinge wear on iron gates that have carried extra weight for years, and roller damage on slide gates installed over concrete that’s since settled. Our crew welds, aligns, rewires, and replaces what’s beyond saving. The Gate Repair in Inglewood page covers our repair pricing and what a typical same-day call here looks like.
Gate Installation in Inglewood
New gate work in Inglewood usually starts with a property line question, because many lots are narrow and a swing gate needs room to arc. We measure for slide gates where the driveway allows, and for swing gates where it doesn’t. We handle the concrete core pours, the hinge welding, and the finish work that matches the gate to the house. Gate Installation in Inglewood breaks down what’s included and what a full install here typically costs.
Gate Motor Repair in Inglewood
Motors in Inglewood fail for the same reasons gates do: age, salt air, and decades of daily cycles. We open the operator box, test the capacitor and limit switch, and tell you whether the repair is a $40 part or a full motor swap before you spend anything. We stock motors and boards for the brands most of this city’s gates run on. The Gate Motor Repair in Inglewood page has our motor repair and replacement pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Inglewood
We work on FAAC, BFT, Linear, and Viking operators, plus the rest of the nine major gate-motor brands. The parts we most often stock for Inglewood calls are FAAC control boards, BFT limit switches, and Linear remotes, which means many motor repairs here finish the same day. You can see the full list on our brands page.
Pricing for Gate Company in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Gate repair service call | $79 – $149 |
| Hinge replacement | $150 – $350 |
| Gate alignment | $125 – $250 |
| Welding repair (per section) | $100 – $225 |
| Gate opener board replacement | $280 – $520 |
| Gate motor replacement | $650 – $1,300 |
| Limit switch replacement | $135 – $240 |
| Remote/programming service | $65 – $120 |
| Full gate installation (single swing) | $2,500 – $6,500 |
| Slide gate track repair | $200 – $500 |
Prices in Inglewood run slightly higher than inland because of the coastal corrosion work and the number of custom-welded frames we correct. Every quote is in writing, delivered before any work begins, and that number does not move at the door.
Neighborhoods We Serve in Inglewood
We cover all of Inglewood, from the streets along Century Boulevard to the quieter blocks near Centinela Park. Most repair calls get a technician scheduled the same day, though a written quote for new installation takes a day or two as we measure.
- Morningside Park
- North Inglewood
- Century Heights
- Hollypark Knolls
Service Area – Cities Near Inglewood
Our Inglewood crews also take calls in the surrounding cities where homeowners face the same gate conditions. If you’re nearby, one of these pages covers your city: Hawthorne, CA, Culver City, CA, El Segundo, CA, Lawndale, CA. Dispatch for all of them is coordinated from our Los Angeles office.
Serving Inglewood, CA – Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Inglewood
If you call before noon on a weekday, we can typically have a uniformed technician at your Inglewood home that same day. Emergency calls are answered by a live person 24/7, including weekends and holidays, and we’ll tell you on the phone when to expect the truck. Call (469) 530-2485 and you’ll get a time window, not a vague “sometime today.”
Many gate installations in Inglewood require a building permit, especially if the gate includes an automatic opener or new concrete footings. We’ll tell you during the estimate whether your project needs one and we handle the paperwork on installs. Repairs to an existing gate generally do not require a permit.
Every repair we make in Inglewood carries a written guarantee, good for a full year from the date of service. If the same repair fails inside that year, we come back free and make it right. That’s the 365-Day Done Right Promise, and it’s stated in writing on every job, not offered as an upsell. Call (469) 530-2485 for a free estimate and a written price.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.