Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Hawthorne, CA
Carver Gate Repair handles gate work in Hawthorne, California, from welding repairs on sagging iron driveway gates to motor replacements on apartment and business entries. Hawthorne’s mix of 1940s and 1950s tract homes, newer condo buildings, and light industrial sites means we see almost every gate style and mounting condition in one service loop. Whether the problem is a worn hinge on a side-yard gate near Hawthorne Boulevard or a failed swing operator on a complex gate off El Segundo Boulevard, we send a uniformed, background-checked technician who quotes a written price before any work begins. Call (469) 530-2485 and a live person answers.
Why Hawthorne Homes Are Different
Hawthorne sits a few miles inland from the coast, which sounds mild until you look at what the marine air and sun do to gate hardware over time. Powder-coated steel gates hold up well in this climate, but older wrought iron and thin-gauge tubular steel tend to develop rust at the bottom rail and the hinge welds. We regularly replace hinge pins and lower rail sections on gates that look fine from the street but have thinned badly close to the concrete. The salt in the air is not heavy, but it is constant, and unpainted or unsealed gate frames pay for it.
The housing stock has a lot to do with the calls we get. Many Hawthorne homes were built between the 1940s and 1960s, often with narrow driveway entries and gates sized for a single car. That matters when a motor is added, because the gate leaf is often lighter than a modern double-leaf iron gate, but the posts are sometimes set shallow or poured without enough footing for a new operator. On newer condo properties and commercial lots, we see different issues: long runs of rolling chain-link gates, loop detectors at entry lanes, and keypad systems that tenants share. Permits are not usually required for repairing an existing gate, but if a driveway gate is being replaced or a new one installed, Hawthorne follows the city’s standard building and planning review, and we point homeowners to the right department rather than guessing.
Our Main Hawthorne Services
These are the three gate jobs we handle most often in Hawthorne. Each has its own page with the pricing, parts, and what to expect on the day of the job.
Gate Repair in Hawthorne
Most repair calls in Hawthorne come down to one of four things: a hinge that has worn out, a wheel or roller that no longer carries weight, a welder job where a joint cracked, or a gate that drags because the post settled. We repair the post, not just the gate, when the post is the problem. On older Hawthorne homes with narrow entries, we often find the original hinges were undersized for the gate weight, and we swap them for heavier gauge hardware. Gate Repair in Hawthorne covers the full scope and typical prices.
Gate Installation in Hawthorne
A new gate in Hawthorne starts with a site measure and a written price. We check the driveway width, the post condition, the slope, and the clearance for a motor arm if one is planned. Many Hawthorne driveways are tight, so we often spec a sliding gate or a single swing leaf instead of a double swing that needs more room to open. The installation page explains what is included, what the timeline looks like, and what to budget. Gate Installation in Hawthorne has the details.
Gate Motor Repair in Hawthorne
When a motor stops working in Hawthorne, the first thing we check is the limit switch, then the control board, then the loop detector on automatic entry systems. A surprising number of “dead” motors are an interrupted loop detector or a misaligned limit switch, not a failed motor at all. We service LiftMaster, FAAC, BFT, Linear, and Viking operators, among others, and we carry the common boards and switches on the truck. Gate Motor Repair in Hawthorne explains the process and the price ranges.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Hawthorne
Our Hawthorne crews work on the systems homeowners actually have: FAAC and BFT hydraulic operators on heavier iron gates, Linear and Viking swing and slide operators on residential driveways, and LiftMaster gear on many local condos and businesses. We stock the common control boards, limit switches, and receiver parts locally so most motor repairs go from diagnosis to a working gate in one visit. See our brands for the full list.
Pricing for Gate Company in Hawthorne, CA
Here are the price ranges we quote most often for gate work in Hawthorne. Every price is written before the work begins, so the number does not move after the job is open.
| Service | Typical range in Hawthorne |
|---|---|
| Hinge replacement or weld repair on a driveway gate | $250 to $500 |
| Gate leaf realignment and wheel or roller replacement | $300 to $750 |
| Full iron driveway gate repair, including welding and painting | $600 to $1,400 |
| Gate motor replacement with a standard swing operator | $1,100 to $2,200 |
| Gate motor repair, including limit switch or control board replacement | $400 to $950 |
| Loop detector replacement for automatic entry gates | $350 to $800 |
| Keypad or intercom system repair | $200 to $600 |
| Complete gate and motor installation, single swing | $3,500 to $7,500 |
| Complete gate and motor installation, double swing | $5,000 to $10,000 |
What pushes a Hawthorne quote higher is usually the post condition, the gate weight, or the distance from the panel to the motor when new conduit has to be run. Access also matters: a gate tucked behind a parked car or set against a retaining wall takes longer to work on. What it does not do is change after we start. The written price is the price.
Neighborhoods We Serve in Hawthorne
We dispatch to every part of Hawthorne, including the neighborhoods where most of our work is concentrated:
- Holly Glen and the residential streets south of Rosecrans Avenue
- North Hawthorne near the Inglewood line, off Prairie Avenue
- East Hawthorne around Crenshaw and 120th
- The area around Hawthorne Boulevard and El Segundo Boulevard
- South Hawthorne near the 405 and Imperial Highway
Typical response time in Hawthorne is same day for emergency gate failures and next day for most scheduled repair work.
Service Area – Cities Near Hawthorne
Our crews serve Hawthorne and the surrounding South Bay and South LA area. For nearby cities, see Lawndale, CA, Inglewood, CA, Manhattan Beach, CA, and Gardena, CA. Scheduling is coordinated from our Los Angeles office, but the technician at your gate is dispatched locally.
Serving Hawthorne, CA – Our Local Coverage Area
We’re based in the Hawthorne area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Hawthorne
For a gate that will not close or a motor that is dead and leaving the property open, yes. We schedule same-day calls for genuine emergencies in Hawthorne. Routine repairs are typically booked within 24 to 48 hours. Call (469) 530-2485 and tell us what the gate is doing, and we will tell you the earliest slot.
Repairing an existing gate does not usually require a permit, including motor replacement. A full replacement or new installation may require a building review depending on height, location, and whether a motor is included. We tell you what applies to your specific project during the site measure, and the written price accounts for it.
Yes. We dispatch to every Hawthorne neighborhood, from the residential streets near the 105 to the commercial properties off Rosecrans and Prairie. There is no area of the city we will not service. Call (469) 530-2485 and a live person answers any hour, any day.
If your gate is dragging, stuck open, or not responding to the opener in Hawthorne, call (469) 530-2485 for a free estimate. A background-checked, uniformed technician arrives, writes the price before any work starts, and backs the repair with a full-year written guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hawthorne Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.