Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Tacoma, WA
Gate repair in Tacoma means working on heavy steel and wood gates that have weathered years of Puget Sound moisture, often mounted on sloped driveways or set into retaining walls. We’re Carver Gate Repair, the gate division of Garrison Partners, and we dispatch technicians to every Tacoma neighborhood from the Proctor District to South End. Most Tacoma jobs involve rusted hinges, sagging gate frames, or motor systems that have given up after repeated salt-air exposure. That’s the work we do every day. When a gate won’t open or a motor stops responding, call (469) 530-2485 and a live person answers, day or night.
Why Tacoma Homes Are Different
Tacoma’s housing stock runs older than most of the Puget Sound suburbs. Many homes in the North End, Stadium District, and around Lincoln High School were built between 1910 and 1960, which means the original gate posts are often set in aging concrete pads that have shifted over the decades. When the post moves, the gate sags, and the motor strains against a frame that no longer lines up square. We see this pattern constantly on older Tacoma properties. Newer construction in the Northeast Tacoma and Browns Point areas presents different issues. Steep driveways and tight side yards force installers to set gates on slopes, which increases the load on hinges and operators. A gate that works fine on level ground in Puyallup can struggle on a 12-degree driveway overlook overlooking Commencement Bay. Add in the moisture, and you get rust at the hinge barrels and corrosion at the limit switch connections faster than homeowners expect.
Our Main Tacoma Services
Most Tacoma homeowners call us for one of two reasons: a gate that won’t open or a motor that makes noise but doesn’t move the gate. Here’s how each job works in Tacoma.
Gate Repair in Tacoma
Gate repair in Tacoma usually means straightening a sagging frame, replacing rusted hinges, or re-setting posts that have shifted in the wet clay soil common around the city. We also handle broken welds, bent gate rails, and latch failures. On older Tacoma properties, the original gate hardware was often undersized for the weight of the gate, so we upgrade to heavier hinges and reinforced posts when we rebuild. Every repair includes a written price before we start and a full-year guarantee on the work. See the complete repair scope on our Gate Repair in Tacoma page.
Gate Installation in Tacoma
New gate installation in Tacoma means starting with the driveway slope and the soil. We set posts deeper than code minimums in areas with known drainage issues, and we use heavier gauge steel for gates that face the wind coming off the Sound. Homeowners in Stadium District and Proctor often want ornamental steel that matches the period look of the house, while Northeast Tacoma clients typically prefer modern horizontal-slat designs. Every installation begins with a free measure and a written quote that spells out the full scope, including the concrete work and power run. Details are on our Gate Installation in Tacoma page.
Gate Motor Repair in Tacoma
Motor repair in Tacoma frequently comes down to moisture. Limit switches corrode, control boards short out after heavy rain, and swing arms seize when the bearing grease breaks down. We carry parts for Linear, Viking, Ghost Controls, and DoorKing, so most motor repairs are completed the same day. If the motor is beyond repair, we quote a replacement and install it usually within the same week. We diagnose the exact failure before quoting anything. Read the full breakdown on our Gate Motor Repair in Tacoma page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Tacoma
We carry common replacement parts for Linear, Viking, Ghost Controls, and DoorKing gate motors on our Tacoma trucks, which keeps turnaround short. Full details on the complete list of nine motor brands we service are on our brands page.
Pricing for Gate Company in Tacoma, WA
| Service | Typical range in Tacoma |
|---|---|
| Gate alignment and hinge adjustment | $200 – $375 |
| Hinge replacement (pair) | $300 – $575 |
| Post re-setting (single post) | $600 – $1,100 |
| Weld repair, steel gate frame | $350 – $675 |
| Limit switch replacement | $275 – $500 |
| Control board replacement | $500 – $950 |
| Loop detector installation | $450 – $850 |
| Swing arm operator replacement | $1,500 – $3,200 |
| New gate installation (single swing) | $2,400 – $5,000 |
| New gate installation (double swing) | $3,800 – $7,500 |
What pushes a Tacoma quote toward the high end is usually slope, soil conditions, or an older gate that needs structural correction before the motor can be mounted. Regardless of the number, the price you approve is the price you pay. We quote in writing before any work begins, and that figure does not move once the job is open. Call (469) 530-2485 for an exact quote on your gate.
Neighborhoods We Serve in Tacoma
Our Tacoma crews cover the full city. We’re on the job in the North End and Proctor, over in Stadium and Hilltop, down through the South End and the Lincoln District, and up into Northeast Tacoma and Browns Point. Typical response time for a repair call anywhere in Tacoma is same-day when the call comes in before mid-afternoon.
- North End and Proctor
- Stadium District
- South End and Lincoln District
- Northeast Tacoma and Browns Point
- West End
Service Area – Cities Near Tacoma
Many homeowners just outside the city limits ask whether we serve their area. We do. In addition to the full city of Tacoma, we dispatch to Milton, WA, University Place, WA, Puyallup, WA, and Federal Way, WA. Scheduling and dispatch are coordinated from the brand’s Seattle office, and crews serve Tacoma locally.
Serving Tacoma, WA – Our Local Coverage Area
We’re based in the Tacoma area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Tacoma
For repair calls placed before mid-afternoon, we typically arrive the same day. Emergency calls are answered by a live person 24/7 at (469) 530-2485, including weekends. If a gate is stuck open and leaving your property unsecured, tell the dispatcher and we’ll prioritize the call.
Simple repairs like hinge replacement or motor swaps do not require a permit. New installations, especially those involving new posts or electrical runs, may fall under Tacoma’s building permit requirements. Our team can tell you during the quote whether your project needs one.
Correct. The price we quote in writing is the price you pay. If we find an additional issue during the job, we stop, explain what we found, and get your approval on a new written price before adding any work. The original approved scope never increases on its own.
Contact Carver Gate Repair in Tacoma
If your gate won’t open, won’t close, or has started making noise it never made before, call (469) 530-2485. You’ll get a live person, a straight answer, and a free estimate before any work is scheduled. Our background-checked, uniformed technicians arrive when we say they will, leave the site clean, and stand behind every repair with a written one-year guarantee. That’s the Garrison Standard, and it applies to every job we do in Tacoma.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tacoma Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.