Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lake Dallas, TX
Carver Gate Repair handles gate work across Lake Dallas, TX, from swing-gate operator failures on Shady Shores Road to slide-gate track problems in the older neighborhoods off Hundley Drive. Lake Dallas sits on the north shore of Lewisville Lake, which means gates here take more wind, more sun, and more soil movement than inland properties. That combination shortens the life of hinges, operators, and safety sensors. If a gate in Lake Dallas won’t open or has slipped off its track, call (469) 530-2485 and a live person answers, day or night.
Why Lake Dallas Homes Are Different
Lake Dallas housing runs mostly to single-family homes built between the 1970s and early 2000s, with a growing number of newer builds on the east side. Gate work in Lake Dallas is shaped by two things: the lake climate and the soil. Humidity off Lewisville Lake accelerates rust on steel frames and hinge hardware. The clay-heavy soil expands and contracts through wet and dry cycles, which slowly shifts gate posts out of plumb. A gate that swings fine in March may drag by August because the post moved a quarter inch.
We also see more wind load here than in neighborhoods further inland. A solid-board gate acts like a sail when gusts come off the water, which is why we recommend heavier-duty hinges and, on wide driveways, a steel frame rather than wood alone. Some Lake Dallas HOAs require gates to match fencing styles, so before an installation we check whether the community has a written gate spec. It’s faster to match a standard than to redo a non-compliant gate.
Our Main Lake Dallas Services
Most Lake Dallas calls come in for two things: a gate that won’t open, and a gate that needs to be installed before a home sale or HOA inspection. Each service has its own Lake Dallas page with full pricing and details.
Gate Repair in Lake Dallas
A Lake Dallas gate repair usually starts with a sagging or stuck gate, a bent hinge, or a section of track that’s come loose at the anchors. We assess the whole setup, not just the visible break, because a dragging gate is often a post problem, not just a hinge problem. Our technicians work on welded steel, wood, and aluminum gates, and every repair carries a written one-year guarantee. Gate Repair in Lake Dallas covers the common jobs and what they cost here.
Gate Installation in Lake Dallas
New gate installations in Lake Dallas have to account for driveway slope, post-setting depth, and wind exposure near the lake. We usually set posts in concrete 36 inches deep, which holds up better through the area’s clay-soil movement than shallow footings. Gate weight, width, and whether it swings or slides all affect the build. We provide a written price before any material is ordered. Gate Installation in Lake Dallas lays out the process and options.
Gate Motor Repair in Lake Dallas
Lake Dallas’s humidity and occasional power surges after storms are rough on gate motors. When an operator quits, the cause is most often a failed capacitor, a worn limit switch, or a control board damaged by moisture. We diagnose the motor first, then tell you the repair price before any parts go in. If a motor is beyond repair, we quote a replacement that fits the existing gate and post layout. Gate Motor Repair in Lake Dallas details the brands and failure patterns we see here.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Dallas
Our Lake Dallas technicians carry parts for FAAC, BFT, and Linear operators, along with Viking swing and slide systems. Common boards, limit switches, and safety-edge parts are stocked on the trucks, so many motor repairs finish in one visit. See our brands for the full list of equipment we service.
Pricing for Gate Company in Lake Dallas, TX
| Service | Typical range in Lake Dallas |
|---|---|
| Service call fee | $49 – $99 |
| Broken hinge or weld repair | $150 – $400 |
| Gate realignment (adjusting posts or frame) | $200 – $500 |
| Replacing a gate spring | $150 – $350 |
| New chain link gate (materials + install) | $350 – $900 |
| New wood or ornamental gate | $900 – $3,500 |
| Operator motor replacement | $500 – $1,600 |
| Replacing safety sensors or edges | $200 – $600 |
| Full gate system (gate + motor + hardware) | $2,500 – $8,000 |
| Rebuilding a sagging or dragging gate | $750 – $1,800 |
In Lake Dallas, price moves mostly with gate weight, driveway width, and whether the existing posts can be reused. Soil movement sometimes forces a deeper footing or a post replacement, which adds labor. Whatever the number is, it’s written down and agreed to before we start, and it does not change at the door.
Neighborhoods We Serve in Lake Dallas
We run calls throughout Lake Dallas, from the established streets along Hundley Drive and Shady Shores Road to newer developments east of I-35E. A typical Lake Dallas call gets a same-day or next-day visit depending on when you phone.
- Hundley Drive area
- Shady Shores Road corridor
- Lake Dallas city center
- The east side off Swisher Road
- Streets near Willow Grove Park
Service Area – Cities Near Lake Dallas
Carver Gate Repair serves Lake Dallas as well as the communities around it. If your gate is in Little Elm, TX, Lewisville, TX, Argyle, TX, or The Colony, TX, the same written-price and guarantee standard applies. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office; the crews that arrive are local to the area.
Serving Lake Dallas, TX – Our Local Coverage Area
We’re based in the Lake Dallas area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Dallas
Most Lake Dallas calls are scheduled for same-day or next-day arrival. Emergency calls, such as a gate stuck open on a property with children or pets, get priority dispatching. Call (469) 530-2485 and you’ll speak with a real person who can give you a window, not a voicemail box.
Some do. If your Lake Dallas community has architectural guidelines, we match the gate to the written spec before starting. That avoids a redo and keeps the project moving. If you’re not sure whether your HOA applies, we can help you check during the estimate.
Yes. We work across Lake Dallas, including homes off Shady Shores Road, Hundley Drive, and the newer subdivisions east of I-35E. The same written pricing and one-year repair guarantee apply everywhere in the city. Call (469) 530-2485 for a free estimate on any gate job.
If your gate is acting up in Lake Dallas, TX, call (469) 530-2485. Lonnie Burke and the Carver Gate Repair crew answer live, quote a written price before any work starts, and stand behind every repair for a full year. No voicemail, no moving numbers, no mess left behind.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Dallas Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.