Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Enterprise, NV
Gate work in Enterprise comes down to heat, wind, and a lot of iron gates that were installed years ago and never touched since. We’re Carver Gate Repair, and we handle gate repair, installation, and motor work across Enterprise, NV. Every job gets a written price before we start, a background-checked technician, and a written guarantee good for a full year. If your gate is grinding, sagging, or just dead at the motor, call us at (469) 530-2485 and we’ll get it sorted.
Why Enterprise Homes Are Different
Enterprise sits in the southern Las Vegas Valley, and the desert climate runs the show here. Summer temperatures north of 105°F bake gate motors, which shortens capacitor life and exposes weak solder joints on control boards. The hard caliche soil means gate posts need deeper footings than what many original installs used, so we see gates that have shifted a few degrees out of plumb and started dragging on the latch side. Wind is the other constant. Enterprise gets afternoon gusts that catch a solid steel gate like a sail, which stresses hinge welds and opener arms. Homes here are mostly single-family, many built in the 1990s and early 2000s, when iron gates were a builder option. That means we see a lot of aging LiftMaster and FAAC operators paired with gates that weigh more than the operator was ever rated for. The result is the same story on block after block: the gate still looks fine, but the motor struggles or the gate hangs low enough to catch the driveway. Those are the jobs we know well.
Our Main Enterprise Services
Most Enterprise homeowners call us for one of two things: a gate that has stopped moving correctly, or a motor that has quit entirely. These three services cover the work we do.
Gate Repair in Enterprise
Repair work in Enterprise usually means welding a cracked hinge, replacing rollers, or realigning a gate that has fallen out of square on its posts. The caliche soil and summer heat both play a role, and we check the post footings on every repair so the gate isn’t just patched and sent back out to fail. We carry steel stock, replacement hinges, and rollers on the truck, and most repairs are done in one visit. Gate Repair in Enterprise covers the full scope, with written pricing before any work begins.
Gate Installation in Enterprise
A new gate in Enterprise needs to be built for the wind load this valley throws at it. We use heavier hinges and deeper post footings than a standard residential install, and we size the gate to the driveway so the operator doesn’t have to fight dead weight. Before we quote anything, we measure the opening, check the soil, and confirm the power run. Gate Installation in Enterprise walks through what a full install includes and what it costs here.
Gate Motor Repair in Enterprise
Most motor failures we see in Enterprise are heat-related. A capacitor dies in July, a control board gets cooked in an afternoon, or the limit switch stops stopping the gate where it should. We diagnose first, then quote. We work on operators from Viking, Ghost Controls, DoorKing, and Elite, plus five other major brands, so the parts match the system already in the ground. Gate Motor Repair in Enterprise explains the common failures and what repair versus replacement looks like.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Enterprise
We service and repair operators from DoorKing, Viking, Ghost Controls, and Elite, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Common parts like capacitors, limit switches, and control boards are stocked on our trucks, so most repairs don’t wait on a parts order. See our brands for the full list of equipment we’re trained on.
Pricing for Gate Company in Enterprise, NV
| Service | Typical range in Enterprise |
|---|---|
| Gate repair service call | $75 – $125 |
| Hinge replacement | $180 – $320 |
| Roller replacement | $140 – $260 |
| Gate alignment | $150 – $300 |
| Weld repair | $120 – $280 |
| Basic gate installation | $1,200 – $3,500 |
| Custom gate installation | $4,000 – $9,000 |
| Motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $600 |
| Limit switch replacement | $180 – $350 |
| Loop detector replacement | $200 – $400 |
In Enterprise, two things push a price toward the top of these ranges. The first is caliche soil when we’re setting new posts, because digging through it takes longer than standard trenching. The second is wind load requiring heavier hardware on wide gates. Whatever the number is, you get it in writing before we touch anything, and that number does not move at the door.
Neighborhoods We Serve in Enterprise
We work across the entire Enterprise area, from the older subdivisions near Silverado Ranch Boulevard to the newer builds south of the 215. Typical response time for a service call within Enterprise is same-day when you call before midday, and next-day for most other requests.
- Mountain’s Edge
- Southern Highlands
- Silverado Ranch
- Inspirada
- Anthem
Service Area – Cities Near Enterprise
While this page covers Enterprise, our crews also serve the surrounding valley. We handle gate repair and installation work in Las Vegas, NV, Henderson, NV, and North Las Vegas, NV. For clients near the California side of the metro area, we cover Spring Valley, CA as well.
Serving Enterprise, NV – Our Local Coverage Area
We’re based in the Enterprise area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Enterprise
Most Enterprise calls are handled same-day when you call before early afternoon. We dispatch from the Las Vegas office, and our technicians carry common parts for DoorKing, Viking, Ghost Controls, Elite, and the other five brands we service. Call (469) 530-2485 and a live person will set the window.
Many Enterprise HOAs require approval for visible changes like a new gate or a full replacement. Repairs that match the existing gate usually don’t trigger a review. We can provide the spec sheet and dimensions your HOA will ask for, but the approval itself comes from the association.
Every repair we do in Enterprise carries a written guarantee good for a full year from the date of service. If the same repair fails inside that window, we come back and make it right at no charge. No argument, no invoice, no second trip charge.
If your gate is giving you trouble in Enterprise, call (469) 530-2485 for a free estimate. A live person answers, we set a clean arrival window, and you get a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Enterprise Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.