Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fontana, CA
Carver Gate Repair handles residential and light-commercial gate work across Fontana, CA. We’re a gate-only company, not a general contractor, and every job runs on The Garrison Standard: a written price before work starts, a background-checked technician in uniform, and a written one-year guarantee on every repair. If your gate is binding, sagging, or the motor is groaning but not moving, call (469) 530-2485 and a live person answers, day or night. We dispatch Fontana jobs locally from the Inland Empire office.
Why Fontana Homes Are Different
Fontana sits at the base of the San Bernardino Mountains, and the Santa Ana winds that sweep through the Cajon Pass don’t just move patio furniture. They load fine dust and grit into tracks, hinges, and operator arms. Homes in older sections like the area around Foothill Blvd and the neighborhoods spread out toward Sierra Avenue often have lighter-weight steel tube gates from the early 2000s that are now rusting at the hinge points. Newer construction north of the 210, up toward Summit Heights, tends toward heavier, full-frame gates with wind bracing – a better design, but one that punishes an undersized operator. We see that mismatch often: a gate rated for a 20-foot opening paired with a motor that was never sized for the wind load it catches every fall. That’s a Fontana pattern. Our technicians account for wind exposure, track pitch, and hinge corrosion before recommending any repair, because a fix that ignores the Santa Anas is a call-back waiting to happen.
Our Main Fontana Services
The two calls we get most from Fontana homeowners are for gates that won’t move and motors that run but don’t open anything. All three of our core services have their own Fontana pages, so each section below links to the full breakdown.
Gate Repair in Fontana
Most repairs we do in Fontana are structural: sagging gates, seized hinges, broken welds, or twisted posts. The dry heat and wind-driven grit accelerate wear on every moving surface, and a gate that drags on the concrete long enough will crack a weld or shear the post anchors. We weld on-site, square the frame, and set the hinge line correctly so the gate swings free again. Full details, including what gets quoted before we touch anything, are on the Gate Repair in Fontana page.
Gate Installation in Fontana
New gate work in Fontana has to account for local wind pressure and the slope of the driveway, which determines swing clearances and the operator mounting position. We measure, present a written proposal with a fixed price, and schedule the install – no day-of surprises. You choose the gate style and operator; we handle the engineering. The full scope is laid out on the Gate Installation in Fontana page.
Gate Motor Repair in Fontana
When a motor burns out in Fontana, the cause is often heat or grit – both of which shorten the life of a swing arm or slide operator in this climate. We diagnose the exact failure: limit switch, capacitor, gear train, or control board – and quote the repair before ordering parts. Keep reading on the Gate Motor Repair in Fontana page for motor-specific pricing and brands we service.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fontana
We carry parts and know the wiring diagrams for Linear, Viking, and Ghost Controls systems, plus the other major names on our brands page. Stocking the right boards and sensors locally means most motor swap-outs in Fontana finish in one visit instead of two.
Pricing for Gate Company in Fontana, CA
| Service | Typical range in Fontana |
|---|---|
| Gate repair (minor, e.g. hinge or latch) | $140 – $340 |
| Gate repair (structural, e.g. welded frame or post) | $375 – $950 |
| Gate motor replacement | $850 – $2,400 |
| Gate installation (standard single swing) | $2,200 – $5,500 |
| Gate installation (heavier or double swing) | $4,800 – $9,000 |
| Limit switch replacement | $165 – $320 |
| Loop detector replacement | $225 – $475 |
| Articulating arm replacement | $350 – $700 |
| Swing operator control board | $275 – $650 |
What pushes a Fontana job toward the upper end of those ranges is usually wind load. A gate that catches the Santa Anas needs a heavier operator and hardened mounting, and we’d rather quote that honestly than install something that dies in its first season. Every price is written and agreed before any work starts – the number doesn’t move at the door.
Neighborhoods We Serve in Fontana
We run calls throughout Fontana, from the older grid streets near Foothill Blvd to the newer developments north of Summit Avenue and the unincorporated edges near Bloomington. Our typical response window for Fontana is same-day for motor failures and next-day for scheduled structural work, depending on parts.
- Summit Heights
- Walnut Village
- West End
- Southridge
- Rancho Fontana
Service Area – Cities Near Fontana
Our Fontana crews also cover the neighboring Inland Empire communities, including Bloomington, CA, Rialto, CA, Rancho Cucamonga, CA, and Riverside, CA. Scheduling is coordinated through the same live-answer line, so a call to us routes to the right crew no matter which city borders your street.
Serving Fontana, CA – Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fontana
Motor failures and gates stuck open usually get same-day dispatch in Fontana, often within a few hours. Structural repairs are scheduled, typically next day. Call (469) 530-2485 and we’ll give you a straight window.
Many Fontana HOAs require architectural review before a gate is replaced or its color changes. Repairs that keep the existing gate generally don’t. We’ll flag anything that might need sign-off before we write the quote.
Yes. We serve all Fontana zip codes, from the 210 corridor to the areas along Sierra Avenue, and we coordinate a single local crew for the city through our Inland Empire dispatch. The same written price and one-year guarantee apply everywhere we work in Fontana.
If your gate is making noise, dragging, or refusing to move, call (469) 530-2485. A live person picks up, we give you a written price before any work starts, and every repair is covered by our full-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fontana Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.