Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Lauderdale-by-the-Sea, FL
Carver Gate Repair handles gate work across Lauderdale-by-the-Sea, from salt-air swing operators on El Mar Drive to slide gates on the residential streets just west of A1A. Salt corrosion, wind loading, and older gate hardware are the three things we see most often on jobs here. Every repair starts with a written price before any work begins, and every call goes to a live person. If your gate has stopped responding or is binding against the track, call (469) 530-2485 and we’ll get a background-checked technician out to take a look.
Why Lauderdale-by-the-Sea Homes Are Different
Lauderdale-by-the-Sea sits directly on the Atlantic, and that changes how gate hardware ages. The salt air accelerates rust on hinges, brackets, and operator arms. Powder-coated steel that holds up for years inland starts showing corrosion at the weld points here within a couple of seasons. Wind is another constant: oceanfront properties and homes within a few blocks of Commercial Boulevard get steady onshore gusts that stress swing gates, particularly wide double-leaf entries. A gate that works fine on a calm morning can bind or throw a limit error when the afternoon wind picks up.
Housing stock runs older along the beach side, much of it built before modern gate automation standards. That means we regularly see undersized operators paired with gates that have gained weight over the years from repairs or added cladding. Building heights and lot lines are tight in the town’s eastern sections, so clearance issues come up more here than in inland Broward communities. Permits are handled through the town’s building division for structural gate work, and our technicians coordinate the paperwork so homeowners don’t have to chase it themselves. The Garrison Standard applies on every job we run in Lauderdale-by-the-Sea: written price first, written guarantee on the repair, and the site left clean.
Our Main Lauderdale-by-the-Sea Services
Most calls we take in Lauderdale-by-the-Sea come down to two things: a gate that won’t move, or a motor that runs but doesn’t do its job. These are the three services homeowners in town call us for most.
Gate Repair in Lauderdale-by-the-Sea
Gate Repair in Lauderdale-by-the-Sea covers mechanical failures: broken hinges, sagging leaves, bent track, worn rollers, and gate posts that have shifted out of alignment. Near the beach, we replace rusted hinge pins and rebuild gate frames more often than anywhere else in Broward County. A common Lauderdale-by-the-Sea call is a swing gate that has dropped on the latch side, leaving the lock rod and the strike plate misaligned by half an inch. We level the leaf, reinforce the hinge mounts, and set the latch back where it belongs. Every repair carries the 365-Day Done Right Promise in writing.

Gate Installation in Lauderdale-by-the-Sea
Gate Installation in Lauderdale-by-the-Sea means a new gate built and set for this town’s conditions. That includes choosing materials suited to salt exposure, sizing the operator for the wind load, and anchoring posts deep enough to hold in sandy soil. We survey the driveway apron, confirm swing or slide clearance, and deliver a written price before ordering anything. For homes with HOA architectural review, we provide cut sheets and finish samples so the application moves without a second round of questions.

Gate Motor Repair in Lauderdale-by-the-Sea
Gate Motor Repair in Lauderdale-by-the-Sea addresses operators that run constantly, reverse without a command, or trip breakers. Salt corrosion to control boards and limit switches is the leading motor issue along the coast here. We test the loop detector, check capacitor health, and verify limit settings against the actual gate travel. Our technicians work on Linear, Viking, Ghost Controls, and DoorKing equipment, and they carry common replacement parts in the truck so most motor calls are handled in one visit.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lauderdale-by-the-Sea
Our Lauderdale-by-the-Sea crews stock parts for Linear, Viking, Ghost Controls, and DoorKing systems, which covers the majority of gate motors installed in town. We keep common limit switches, control boards, and remote receivers in the truck, so most motor repairs finish in a single visit. For larger jobs, parts are sourced through our brands network and arrive within a few days.
Pricing for Gate Company in Lauderdale-by-the-Sea, FL
| Service | Typical range in Lauderdale-by-the-Sea |
|---|---|
| Gate repair service call | $75 – $125 |
| Hinge replacement (single gate) | $150 – $300 |
| Track realignment or replacement | $200 – $500 |
| Gate wheel or roller replacement | $120 – $250 |
| Gate post reset or reinforcement | $400 – $900 |
| Operator arm or bracket replacement | $180 – $350 |
| Limit switch replacement | $100 – $200 |
| Loop detector repair | $150 – $300 |
| Complete linear actuator replacement | $600 – $1,400 |
| New gate motor (parts and labor) | $2,500 – $6,000 |
Salt corrosion and wind exposure are the two factors that push Lauderdale-by-the-Sea pricing toward the upper end of these ranges, because we replace rusted hardware rather than patch over it. Whatever the estimate comes to, you’ll see it in writing before we start, and the number doesn’t move at the door.
Neighborhoods We Serve in Lauderdale-by-the-Sea
We cover the full town, from the oceanfront condos and single-family homes east of A1A to the neighborhoods west of Federal Highway. Our response window in Lauderdale-by-the-Sea is typically the same day for motor and gate failures, with crews dispatched from our South Florida office.
- Oceanfront / East of A1A
- Central Lauderdale-by-the-Sea
- West of Federal Highway
- Bel-Air
- North Beach area
Service Area – Cities Near Lauderdale-by-the-Sea
While our Lauderdale-by-the-Sea crews cover the town in full each day, we also run calls in the larger Florida metros where Carver Gate Repair operates. If you need service outside Broward County, see Jacksonville, FL, Miami, FL, Tampa, FL, or Orlando, FL for coverage in those areas.
Serving Lauderdale-by-the-Sea, FL – Our Local Coverage Area
We’re based in the Lauderdale-by-the-Sea area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lauderdale-by-the-Sea
Most gate and motor failures in Lauderdale-by-the-Sea get a same-day visit. Crews are dispatched from our South Florida office, and because we keep common parts for Linear, Viking, Ghost Controls, and DoorKing systems in the trucks, many jobs are finished on the first trip. Call (469) 530-2485 and our live dispatcher will confirm the current window.
Structural gate work in Lauderdale-by-the-Sea, like a new installation or post reset, goes through the town’s building division. Gate and motor repairs on existing hardware generally do not. Our technicians coordinate any required paperwork as part of the job, and we’ll tell you up front whether your specific project needs a permit before we start.
Yes. For homes in gated communities or with HOA architectural review, we provide material and finish documentation, gate specifications, and operator details so your association can approve the work. If your HOA has a specific approval form, we’ll fill out our sections and return it to you the same day. The earlier you get us involved, the smoother the approval timeline runs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lauderdale-by-the-Sea Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.





Before
After
Before
After
Before
After