Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Aubrey, TX
Carver Gate Repair is the gate company Aubrey homeowners call when a gate won’t open, a motor quits, or a property needs a new driveway gate built to spec. We work on residential and light-commercial gates across Aubrey, and the homes here keep us busy for a reason: clay soil that shifts with every wet-dry cycle, long gravel driveways off FM 428 and 1385, and iron gates that take a beating from Texas sun and wind. If your gate is down, call (469) 530-2485 and a real person answers.
Why Aubrey Homes Are Different
Aubrey sits on Blackland Prairie clay, and that soil moves. It swells after spring rain and shrinks through dry summers, which means gate posts set a decade ago may now lean a half-inch out of plumb. That half-inch is enough to change how a swing gate latches or how a slide gate rides its track. We see this most often in neighborhoods like Sandbrock Ranch and ArrowBrooke, where heavier ornamental steel gates sit on posts poured before the current drought cycle began.
The other Aubrey factor is weather. Gates here face direct sun most of the year, and the metal absorbs enough heat to shorten the life of capacitors and circuit boards inside gate operators. We replace more control boards in July and August than any other months. Wind is also a real consideration for taller solid gates, which act like sails and load the hinges and the operator arm harder than a standard open-picket gate. When we quote a repair or an install in Aubrey, those local conditions shape what we recommend.
Our Main Aubrey Services
Most Aubrey calls start with one of three problems: a gate that won’t move, a motor that hums but doesn’t turn, or a property that needs a new gate built and installed. Each service has its own Aubrey page with pricing, timelines, and the specific parts involved.
Gate Repair in Aubrey
A gate repair in Aubrey usually means aligning or replacing hinges, welding a cracked weld, or fixing a gate that drags on the driveway because the post has settled. We also handle latch and lock repairs, wheel and roller replacement on slide gates, and bent or sagging gate frames. Because Aubrey driveways often slope toward the street for drainage, swing gates here tend to sag toward the low side over time. Gate Repair in Aubrey covers what we check and how we price the common repairs.

Gate Installation in Aubrey
New gate installations in Aubrey are often for homeowners on acreage lots who want a driveway gate that matches a pipe fence or a custom ornamental gate at a subdivision entry. The install includes setting posts below the clay line, building the gate to fit the opening, and hanging it so it swings or slides clean. We account for the soil movement and wind load before the first post hole is dug. Gate Installation in Aubrey walks through materials, lead times, and what a full install includes.

Gate Motor Repair in Aubrey
When a gate operator fails, the cause is usually one of a few components: a limit switch that no longer tells the motor where to stop, a capacitor that gave out in the heat, or a control board that took a surge. We troubleshoot the operator first, then tell you the fix and the written price before any work starts. There’s no point guessing and replacing parts one at a time. Gate Motor Repair in Aubrey explains the common failures we see on Aubrey gates.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Aubrey
Carver Gate Repair technicians work on our brands including FAAC, BFT, and Linear operators, plus Viking swing and slide systems. We keep common boards, limit switches, and remote receivers stocked for those brands, so many Aubrey motor repairs are completed in a single visit.
Pricing for Gate Company in Aubrey, TX
These are the price ranges Aubrey homeowners should expect for common gate work. Every job gets a written price before any work starts, so the number doesn’t move at the door.
| Service | Typical range in Aubrey |
|---|---|
| Gate repair service call and diagnosis | $75 – $150 |
| Gate hinge replacement | $150 – $400 per hinge set |
| Gate wheel or roller replacement | $100 – $300 per assembly |
| Gate latch or lock replacement | $90 – $250 |
| Gate motor limit switch replacement | $125 – $275 |
| Gate motor capacitor replacement | $100 – $225 |
| Gate motor control board replacement | $250 – $650 |
| Full gate operator replacement (motor and arm) | $800 – $2,400 |
| New residential driveway gate install | $1,500 – $6,000 |
Prices in Aubrey run higher when a gate is oversized, the driveway has a steep grade, or the operator is an older model that needs a retrofit plate and new wiring. Whatever the job, the price we quote is the price you pay, and every repair carries a written guarantee good for a full year.
Neighborhoods We Serve in Aubrey
We repair and install gates throughout Aubrey, including the newer master-planned communities and the older acreage roads east toward Cross Roads and south along 377. Most Aubrey calls get a same-day or next-day visit depending on the schedule, with emergency gate failures prioritized.
- Sandbrock Ranch
- ArrowBrooke
- Silverado
- The Preserve at Sandbrock Ranch
- Pilot Point Road and FM 1385 corridor
Service Area – Cities Near Aubrey
Our Aubrey crews also cover nearby communities when a gate fails or a property needs a new install quoted. We serve Frisco, TX, Little Elm, TX, Denton, TX, and Prosper, TX with the same written-price and written-guarantee standard.
Serving Aubrey, TX – Our Local Coverage Area
We’re based in the Aubrey area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aubrey
Most Aubrey calls get a same-day or next-day visit. A gate stuck open or a gate that won’t close is treated as urgent, and we’ll tell you an arrival window when you call (469) 530-2485.
That depends on your community. Master-planned areas like Sandbrock Ranch and ArrowBrooke have design review processes for new construction including driveway gates. We’ll build to the HOA’s specs once you have the approval in hand.
Yes. We work the unincorporated areas around Aubrey, including properties on acreage along FM 428, FM 1385, and 377. If you’re in the larger Aubrey area, call (469) 530-2485 and we’ll confirm coverage and a visit window.
If your gate is down or you’re planning a new install in Aubrey, call Carver Gate Repair at (469) 530-2485. You’ll get a straight answer, a written price, and a technician who knows gates better than anyone else in the trade.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aubrey Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.





Before
After
Before
After
Before
After