Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Antioch
Gate installation in Antioch, CA comes down to two things: setting posts deep enough for this soil and wiring the operator correctly the first time. A new driveway gate or pedestrian gate typically runs $1,800 to $6,500 installed in Antioch, depending on size, material, and whether you’re adding automation. We dispatch crews to Antioch neighborhoods off Lone Tree Way, James Donlon Boulevard, and Hillcrest Avenue with written pricing before any work starts. Call (469) 530-2485 and a live person answers, 24/7.
Why Carver Gate Repair Is Antioch’s Preferred Gate Installation Company
Homeowners in Antioch have dealt with enough no-shows and moving prices to know the difference between a crew that shows up squared away and one that doesn’t. Lonnie Burke built Carver Gate Repair around The Garrison Standard: written prices, background-checked technicians in uniform, and a 365-Day Done Right Promise on every job. If a repair fails inside the guarantee window, we return free of charge. No argument, no invoice.
We work on nine gate-motor brands including LiftMaster, Linear, and DoorKing, so when an Antioch homeowner has an existing operator, we match the right parts and programming to what’s already bolted to the post. Our technicians understand Antioch’s clay-heavy Delta soil and what it does to gate posts, hinge mounts, and rack tracks over a wet winter. That’s not marketing language. It’s what we correct on jobs across Antioch every month.
Gate Opener Installation in Antioch
Gate Opener Installation in Antioch usually means adding a swing arm or slide operator to an existing gate, or replacing a dead motor on a gate that already has automation. A typical operator install runs $1,200 to $3,800 depending on the motor brand, the gate’s weight and length, and whether we’re running new conduit for power and safety devices. Most Antioch jobs take one full day.
Swing Arm Operators
For a double gate off a residential street in Antioch, we size the operator to the gate leaf weight and hinge geometry. Articulating arms work well on wide columns or gates set back from the driveway. We set the limit switches, wire the safety photocells, and run reversal testing so the gate stops and reverses under load.
Slide Gate Operators
Sliding gates on Antioch properties with sloped driveways or tight setbacks often use rack and pinion track. The track has to be set on a footing that accounts for seasonal soil movement in Antioch’s expansive clay. We mount the operator on a concrete pad with drainage so the base plate doesn’t sit in standing water through the winter.
Gate Fabrication in Antioch
Gate Fabrication in Antioch covers building a new gate from steel or aluminum to fit an existing opening, or replacing a gate that’s rusted, sagged, or too light for the operators now on the market. A fabricated steel driveway gate in Antioch typically runs $2,200 to $5,500 depending on width, height, and panel style. Aluminum runs lighter and costs more per foot, but it won’t rust in the Delta air.
Custom Steel Gates
We build steel gates for Antioch homes with wider driveways or heavier traffic, and we powder-coat the frame and panels before install. The frame gets welded, not bolted, at the corner joints. That matters in Antioch because a bolted corner joint works loose under repeated wind load off the Delta.
Pedestrian and Security Gates
Side-yard pedestrian gates in Antioch are often the first thing a homeowner replaces after a fence job, and we build them to match the fence line. Security gates for Antioch backyards or side entries get welded frames and deadbolt-ready latch plates. We quote the entire build, including posts, hinges, and hardware, before any steel is cut.
Trusted Brands We Service in Antioch
We carry Linear and DoorKing parts for quick turnaround on Antioch jobs, and we’re trained on Viking and Ghost Controls equipment as well. That local parts stock means an Antioch homeowner with a failed operator isn’t waiting a week for a board to ship from a warehouse. Carver technicians match the opener to what’s already installed, program the remotes, and test the safety loop before they leave the property.
Common Gate Installation Problems We See in Antioch Homes
- Shallow post footings in clay soil. Antioch’s expansive clay heaves during winter rains, and a post set 18 inches deep will move. The gate sags, binds at the latch, and a panel adjustment won’t fix the root cause. The post has to come out and get re-set deeper.
- Corroded operator base plates. Installers who skip drainage around the post footing leave the operator sitting in water through the wet season. The base plate rusts, the motor housing leaks, and the operator fails early. We put gravel and drainage at the base before mounting.
- Photocells tripped by Delta wind debris. Antioch’s wind-driven leaves and branches can block a safety beam mid-travel, and the gate stops. We align photocells and set a loop detector as backup so the gate doesn’t reverse every time the wind kicks up.
- Rack misalignment from soil movement. A rack and pinion track on shifting clay chews through drive gears within a year. We set the track on the same deep footing as the gate and check alignment with a straight edge before we bolt it down.
Pricing for Gate Installation in Antioch, CA
Here’s an honest breakdown for Antioch. A pedestrian gate runs $800 to $2,200 installed. A single steel driveway gate runs $1,800 to $4,500. A double driveway gate runs $3,000 to $6,500. Adding a gate opener runs $1,200 to $3,800 on top of the gate itself. Full automation, with safety edges, photocells, and a loop detector, usually lands between $4,500 and $9,500 all-in for a double gate in Antioch. The price is written and agreed before we start, and it doesn’t move at the door. Call (469) 530-2485 for a free measure and exact quote.
We Also Serve Cities Near Antioch
Our crews serve Oakley, Pittsburg, Clayton, and Brentwood from the same scheduling line. If you’re outside Antioch proper, we still dispatch a background-checked technician with the same written pricing and 365-Day Done Right Promise. See our Gate Installation page for service details, or check what we do across Antioch for the full local picture.
Serving Antioch, CA – Our Local Coverage Area
We’re based in the Antioch area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Antioch
We set gate posts 36 inches deep minimum in Antioch, with rebar in the concrete and a footing sized for the gate weight. The clay soil here expands when wet and shrinks when dry, and anything shallower will heave within two winters. Call (469) 530-2485 if your gate is already binding at the latch, and we’ll inspect the posts before quoting any repair.
Most residential gate installations in Antioch don’t require a separate permit from the city, but automatic gate operators must meet UL 325 safety standards, which include photocells, safety edges, and reversal testing. We handle that compliance work as part of every operator install.
A new automatic gate in Antioch needs photocells at the correct height, a reversing edge or loop detector, and an audible alarm if the gate is the only access point. We wire all three and run the full reversal test in front of you before we call the job done. Call (469) 530-2485 to schedule an install that meets UL 325 from day one.
A single driveway gate with operator typically installs in one to two days in Antioch. Custom fabrication adds a week to two weeks for steel cutting, welding, and powder coat. We’ll give you a written schedule before any work starts, and we don’t promise same-day turnaround on installations because proper footings take time to cure.
Linear and DoorKing operators hold up well in Antioch’s wet winters and dry summers, and Ghost Controls works well on lighter residential gates. The brand matters less than the footing and drainage underneath it. We match the operator to your gate weight and the site drainage, then back the whole install with a written one-year guarantee.
We answer the phone live around the clock, and we’ll schedule the next available dispatch to your Antioch neighborhood. For emergency gate failures, we’ll send a technician as soon as one is available. Call (469) 530-2485 and we’ll get you on the schedule.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Antioch and the surrounding Delta communities.