Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Banning
Gate installation in Banning costs $1,900 to $5,800 for a single driveway gate and $4,200 to $9,600 for a double gate, depending on material, operator, and how much concrete work the old slab requires. Most installations here take one to three days once the site visit is done and the gate is ordered. Call (469) 530-2485 and we’ll walk the site, give you a written price, and put your installation on the schedule.
We’re not a general handyman crew dabbling in gate work. Carver Gate Repair installs gates in Banning every week, and we know exactly what a slab-and-block home built in the 1950s or 1960s demands from a gate post. Banning’s heat, wind, and older concrete don’t tolerate shortcuts. Our technicians core into existing slabs, pour isolated footings, and set hinge posts so the gate opens square a year from now, not just on install day.
Why Carver Gate Repair Is Banning’s Preferred Gate Installation Company
Homeowners in Banning call us because the process is predictable. You’ll get a written price before any work starts. The technician who shows up is background-checked and in uniform. The phone rings to a live person at 3 a.m. on a Sunday if that’s when you call. Lonnie Burke runs our crews to what we call The Garrison Standard: written prices, clean sites, and a full-year guarantee on every installation we put in the ground.
The guarantee is specific. It’s a 365-Day Done Right Promise, and it’s in writing. If something on your new gate fails inside that year, we come back and fix it at no charge. That’s the whole point of hiring a gate company instead of a contractor who fits gates in between fence jobs and kitchen remodels. We work on nine gate-motor brands, including LiftMaster, Viking, and DoorKing, so the operator on your new Banning gate is matched to the system, not whatever was on the shelf at the supply house.
Response time to Banning matters. Our scheduling center is in the Inland Empire, and we dispatch crews into Banning regularly enough that you won’t wait a week for a site visit. When a Banning homeowner calls about a sagging gate or a dead operator, we can usually get someone out fast, and we never send a price that changes at the door.
Electric Gate Installation in Banning
Electric gate installation in Banning is the full job: setting posts, hanging the gate panel, running power to the operator, mounting safety photocells and edge sensors, wiring a keypad or intercom, and dialing in the operator’s open and close limits. On Banning’s older east-end homes, it also means coring through the existing driveway slab to pour isolated post footings so the hinge posts don’t shift when the ground cooks and cools through a Banning summer.
Operator and Safety Equipment
Every electric gate we install in Banning gets a set of safety photocells across the opening and either a monitored edge sensor or a solid non-contact detector, depending on the gate type. These are not add-ons. UL 325 requires them, and we set the reversal sensitivity so the gate stops and reverses if it meets a kid, a dog, or a car bumper. We test that reversal in front of you before we leave.
What It Costs in Banning
A single electric driveway gate installation in Banning typically runs $2,800 to $5,200. That includes the operator, safety equipment, keypad, and the post setting. A double electric gate is more, usually $5,400 to $9,600, because it means two leafs, two sets of hinges, and sometimes a heavier operator. We quote it in writing before any work starts.
Driveway Gate Installation in Banning
Driveway gate installation in Banning is what we do most often: a steel or aluminum gate across the front of the house, set on posts that will hold their plumb for years. Banning’s housing stock leans heavily toward 1950s and 1960s slab-and-block construction, so a proper driveway gate here starts with the concrete, not the gate panel. We core through old aprons and pour fresh footings at every hinge and latch point.
Gate Panels and Materials
We install steel, aluminum, and wood gates in Banning, and we’ll tell you straight which one fits your block. Steel handles Banning’s sun well but wants a zinc-rich primer. Aluminum won’t rust and is lighter on the operator. Wood looks right on a mid-century house, but it warps in the dry heat and Santa Ana cycles, so the hardware has to account for movement. We spec the hinges and latch accordingly.
Permits and Setbacks
Banning’s building code requires gates to swing inward, away from the sidewalk, unless the driveway is long enough to meet the setback. That’s a safety and right-of-way rule, and we check it before quoting. If your gate has to reverse-swing or shorten, that changes the post placement and operator selection. We handle that on the site visit.
Real Numbers
Expect $1,900 to $4,400 for a single driveway gate in Banning without automation, and $4,200 to $8,200 for a double driveway gate. Adding an electric operator moves you into the electric gate range above. The price we give you is the price on the work order. A written price is The Garrison Standard, not a favor.
Trusted Brands We Service in Banning
We install and service operators from Linear, Viking, and DoorKing, which covers most of what’s already mounted on Banning gates. That matters for two reasons. First, we can match your new installation to a brand we already know well, so warranty parts and service calls aren’t a research project. Second, when a Banning homeowner has an existing operator and wants to reuse it on a new gate, we can make that call correctly instead of pushing you into a new unit you don’t need. We keep common parts and safety edges stocked locally, and anything we don’t have in the truck comes fast from our Inland Empire parts bench.
Common Gate Installation Problems We See in Banning Homes
- Anchoring posts into cracked, old driveway slabs without a proper footing. The gate works fine for a season, then the hinge post shifts, the leaf sags, and the gate drags on the concrete. We core out a clean hole and pour an isolated footing at each hinge and latch point before we hang anything.
- Safety photocells aimed wrong or skipped entirely. On sloped east-end driveways, the gate and the sensor need careful alignment. If the beam doesn’t line up across the whole opening, the gate is not UL 325 compliant and it will fail an inspection or a claim.
- Chain-drive hardware on heat-warped panels. Banning’s dry heat and Santa Ana cycles warp wood and stress metal. Chain stretch and constant re-tensioning follow. We spec belt or rack-and-pinion drives where the panel demands it, and we show you how to spot wear before it strands you.
- Under-sized power runs to a detached street-side gate. The operator browns out on a 105-degree afternoon and the loop detector trips mid-cycle. Part of a real Banning installation is running the right gauge to the operator and protecting the line.
Pricing for Gate Installation in Banning, CA
You should know the numbers before you call. A single driveway gate in Banning starts around $1,900 and goes up from there. A single electric driveway gate is $2,800 to $5,200. A double electric gate is $5,400 to $9,600. What moves the number is the size of the gate, the material, the operator, ground conditions at the posts, and how long the power run is. We give you a written price after a site visit, and that number does not change when the crew shows up. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Banning
Our crews cover Banning and the surrounding communities, including Beaumont, Calimesa, San Jacinto, and Yucaipa. If you’re just outside the city line, call us and we’ll let you know the next available site visit. The same written pricing and full-year guarantee apply across the area. For a closer look at what a full Gate Installation involves, start there, then call the office.
Serving Banning, CA – Our Local Coverage Area
We’re based in the Banning area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Banning
You get the gate panel, hinge and latch posts set in concrete, the operator and mounting bracket, a power run to the operator, safety photocells across the opening, an edge sensor or non-contact detector, and a keypad or intercom. We core the old slab, pour isolated footings, set reversal sensitivity, and test it in front of you. That’s the full scope, and it’s all in the written price. Call (469) 530-2485 to set up a site visit.
Not always. A sagging gate often means the hinge post footing has shifted in Banning’s hot, cycling soil, or the hinge hardware is worn or undersized for the panel. We can re-core and re-set the post, upgrade the hinges, and square the gate. If the panel itself is heat-warped on an older wood gate, replacement may cost less than repeated straightening. We’ll tell you which way the numbers point before we quote anything.
It can be, particularly for gates set far from the house where a trench to the panel would cross dozens of feet of old slab. Banning gets strong sun, and a correctly sized solar kit with a decent battery bank will run a single swing gate most of the year. A double gate or a heavy steel panel usually wants a hardwired operator. We’ll walk the site and tell you honestly which one fits.
A compliant gate has monitored safety photocells across the opening, an edge sensor or non-contact detector on the closing edge, and a properly set reversal function. We test the reversal in front of you and set the force low enough that the gate stops on contact. That’s the UL 325 standard, and we don’t install a gate that skips it. Ask any installer to show you the reversal test; we do it every time.
Yes, and that’s most of what we do on Banning’s east end. We core a hole through the old apron, remove the plug, set the post, and pour an isolated footing that carries the hinge load. The old slab stays in place. We don’t bolt posts to the surface of cracked concrete, because that’s how you get a gate that sags in two years. Call (469) 530-2485 and we’ll look at your slab and give you a straight answer.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.