Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Beverly Hills
Gate installation in Beverly Hills typically runs $4,200 to $11,800 for a complete driveway gate with operator, and most jobs are completed within 5 to 10 business days once materials arrive and the pad is poured. The neighborhoods that stretch up into the hills off Coldwater Canyon, Benedict Canyon, and Franklin Canyon have a slope problem that flat-grid cities like Culver City mostly never deal with. We know because we work those driveways every week. If you need a gate that opens and closes cleanly year after year on a Beverly Hills grade, call (469) 530-2485 and we’ll send a technician to measure, price it in writing, and walk you through exactly what your property needs before any work starts.
Key Takeaways
- Complete gate installation in Beverly Hills runs $4,200 – $11,800 depending on gate type, operator, and groundworks.
- Hillside properties often need a level concrete pad cut into the slope; skipping this step is why so many slide gates fail here.
- Every quote is written, itemized, and agreed before work starts. The number does not move at the door.
- UL 325 entrapment protection is required on every automatic gate. We install and test photocells, safety edges, and reversal on every job.
- 365-Day Done Right Promise on every installation, in writing.
Why Carver Gate Repair Is Beverly Hills’s Preferred Gate Installation Company
Lonnie Burke built Carver Gate Repair around a simple rule: a homeowner should know the price before the work starts, know who is coming through the gate, and know the job is covered for a full year afterward. That is The Garrison Standard, and every Beverly Hills job runs on it. Our technicians are background-checked and uniformed. They arrive in a marked vehicle, walk the site with you, and put the scope of work on paper before a single footing is dug. No moving prices, no vague estimates, no no-shows.
We dispatch to Beverly Hills from the brand’s Los Angeles office, so scheduling runs on the same process from the flats to the hills. Our crew knows which streets drain hard in winter and which canyon-side lots need extra compaction before a post footing goes in. That local knowledge changes how a gate is built. The phone is answered by a live person around the clock, including weekends and holidays, so when a gate motor quits at night or a track comes out of alignment after a storm, you are not leaving a voicemail and hoping.
Most of our Beverly Hills work comes from referrals. Homeowners who watched a previous contractor install an operator spec’d for a flat driveway on a 12% canyon grade do not want a repeat. They want it done once, properly, with a written guarantee behind it.
Sliding Gate Installation in Beverly Hills
Sliding Gate Installation on a Beverly Hills hillside is a different job than the same install in Santa Monica or Marina del Rey. Most Beverly Hills properties sit behind hillside driveways with a street-to-gate grade, so slide gates here often need a level concrete pad cut into a slope. That slope-and-pad requirement is far less common in flat-grid cities nearby. Get the pad wrong and the gate drags, the track pulls out of alignment, and the operator burns out early. We see it constantly.
Pad and Track Work on a Grade
Before a track goes down, we check slope, drainage, and runoff. A pad poured out of level means the gate fights gravity every cycle. On hillside lots we cut the pad level, set the post footing with proper cure time, and run rack and pinion along the full travel so the operator is pushing the gate, not dragging it.
Operator Sizing for Sloped Driveways
An undermount operator spec’d for a flat driveway will not survive long on a Beverly Hills grade. We match the operator to the gate weight, the travel length, and the slope, then test it under load before we call the job done. That is the difference between a gate that works for fifteen years and one that limps through two.
Gate Opener Installation in Beverly Hills
Gate Opener Installation in Beverly Hills usually runs $1,100 to $3,400 for the operator and controls, assuming the gate itself and the pad are sound. If the gate is dragging because the track was poured out of level years ago, the opener is not the fix. The pad and footing are the fix. We will tell you that before you spend a dollar.
Retrofit vs. Full Groundwork
When the existing pad and track are level and true, an operator retrofit is a one-day job. We mount the operator, run the controls, wire the loop detector and photocells, and test reversal under the UL 325 standard before we leave. When the pad is bad, we stop and show you exactly what is wrong and what a proper correction costs. You get that in writing.
Entrapment Protection, Always
Every automatic gate operator in Beverly Hills requires working entrapment protection. That means photocells, safety edges, and reversal testing. We do not install an operator without them, and we do not skip testing to save time. It is the law and it is the right way to do the job.
Trusted Brands We Service in Beverly Hills
We install and service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule operators. For Beverly Hills homes with older DoorKing or Viking systems still holding on, we can often repair or match the existing brand instead of ripping everything out. We stock common parts locally for faster turnaround when a board, limit switch, or loop detector fails mid-week. You get a written price on parts and labor before any work begins, no matter which brand is on the gate.
Common Gate Installation Problems We See in Beverly Hills Homes
- Operators spec’d for flat driveways installed on hillside grades. The gate drags, the motor strains, and the operator burns out in months instead of years. We size the operator to the actual slope and gate weight.
- Tracks and pads poured without checking drainage. Seasonal runoff from canyon lots undermines post footings and pushes gates out of alignment. We check drainage before we pour anything.
- Safety edges and photocells skipped or left untested. An automatic gate without working entrapment protection is out of compliance with UL 325 and dangerous. We test every sensor on every job.
- Undersized posts on double gates. A double gate hanging on posts that flex under load will sag, bind, and eventually fail at the hinges. We set post footings to the load they will actually carry.
Pricing for Gate Installation in Beverly Hills, CA
A single swing gate with a basic operator in Beverly Hills starts around $4,200. A sliding gate with groundworks on a hillside pad runs $6,500 to $9,800. A double security gate with a heavy-duty operator, keypad, and loop detector lands $8,000 to $11,800. Operator-only retrofits run $1,100 to $3,400. The price is written down and agreed before work starts. No number moves once we begin. Call (469) 530-2485 for a free measure and a line-by-line written quote.
We Also Serve Cities Near Beverly Hills
Carver Gate Repair handles Gate Installation projects throughout Beverly Hills and the surrounding west side. We regularly work in West Hollywood, Culver City, Santa Monica, and Marina del Rey. If your property is near Beverly Hills but on the edge of one of those cities, call and ask. We will give you a straight answer on coverage and schedule.
Serving Beverly Hills, CA – Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Beverly Hills
Because the pad was poured out of level and the gate has been fighting gravity since day one. On a slope, the track has to sit level and the footing has to hold. When a pad is poured onto a grade without checking drainage, runoff undermines the post, the track shifts, and the gate drags. That drag burns out operators. The fix is a level pad cut into the slope, a properly cured footing, and a rack-and-pinion setup matched to the gate. Call (469) 530-2485 for an exact quote on correcting your site. Estimates are free.
Yes. Every automatic gate operator installed in Beverly Hills must have entrapment protection that meets UL 325. That means photocells, safety edges, and reversal testing. We install and test all of it on every job, and we document the test before we leave. Call (469) 530-2485 if you want a gate checked for compliance.
Most complete gate installations take 5 to 10 business days from the day materials arrive and the concrete is poured. Cure time on the pad and post footings is not something you can rush, especially on hillside lots where the soil shifts with rain. An operator-only retrofit on a sound gate can be done in one day. We’ll give you a written schedule with the quote so you know exactly what to expect.
We install Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. If you have an existing brand and want to match it, we will tell you whether that is the right call for your gate and slope. Call (469) 530-2485 and we’ll walk you through the options in plain terms.
A proper swing gate installation includes post footings sized to the actual gate load, hinges set so the gate does not sag, an operator matched to the gate weight and duty cycle, working photocells and safety edges, and reversal testing before the job is closed out. Skip any one of those and the gate fails early. Call (469) 530-2485 for a written quote that includes all of it.
Call Carver Gate Repair for Gate Installation in Beverly Hills
If you want a gate that works, a written price, and a full-year guarantee in writing, call (469) 530-2485. We’ll send a background-checked, uniformed technician to measure your driveway, assess the slope, and give you a line-by-line quote before any work starts. No moving prices, no skipped safety features, no work that falls apart in a year. That is The Garrison Standard, and it applies to every gate we build in Beverly Hills.
Written by Lonnie Burke, Owner at Carver Gate Repair, working to The Garrison Standard on every gate installation in Beverly Hills.