Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pasadena, CA
Gate work in Pasadena means dealing with older iron, tighter property lines, and hillside driveways that put real strain on hinges and motors. We’re Carver Gate Repair, and we focus on one trade: gates and the motor systems that run them. Every Pasadena job gets a written price before work starts, a background-checked technician in uniform, and a one-year written guarantee. If your gate is sticking, sagging, or dead at the curb, call us at (469) 530-2485 and a live person will answer.
Why Pasadena Homes Are Different
Pasadena’s housing stock runs older than most of Los Angeles County. A large share of the single-family homes near the Arroyo and in neighborhoods like Bungalow Heaven, Madison Heights, and Linda Vista were built between 1910 and 1950. That means a lot of original driveway gates, steel frames set in masonry pillars, and swing hardware that has been carrying weight for decades. When we open a gate in Pasadena, we expect to find rust at the hinge welds and posts that have shifted with the soil. The fix is rarely just a part swap; it’s re-seating the leaf and addressing what caused the sag in the first place.
Pasadena also has real elevation change. Streets climb as you move north toward Altadena, and many driveways slope up from the curb. A swing gate on a sloped driveway puts constant lateral load on the operator. That’s a different failure pattern than a flat lot in the San Gabriel Valley, and it changes the motor we recommend and the way we set limit switches. Some neighborhoods, particularly those with historic-district overlays, require design review before a new gate goes in. If you live in one of those districts, we’ll tell you at the estimate, not after the permit comes back denied.
Our Main Pasadena Services
Most Pasadena homeowners call us for one of two reasons: a gate that has stopped moving, or a gate that needs to be replaced entirely. Below are the three services we run in Pasadena, each with its own page covering pricing and process.
Gate Repair in Pasadena
A gate that won’t open or won’t close is usually a mechanical failure first: a broken weld, a seized hinge, a chain that has jumped the sprocket. We diagnose the whole assembly, not just the obvious symptom, because a bent wheel track on a Pasadena hillside will wear out a new roller in months. The full breakdown of what we fix and typical Pasadena pricing is on the Gate Repair in Pasadena page.
Gate Installation in Pasadena
New gate installation in Pasadena usually means matching a structure to an existing fence line, pillar span, or driveway pitch. We measure in person, quote a written price, and schedule the work without a guessing game. If your property is in a historic district, we’ll flag the review requirement early. See what a full Pasadena install includes on the Gate Installation in Pasadena page.
Gate Motor Repair in Pasadena
When the gate itself is sound but the operator won’t respond, the problem is in the motor, the control board, or the safety sensors. Pasadena’s heat and dust shorten capacitor life faster than coastal air does. We carry parts for all nine brands we service, which keeps most motor jobs to a single visit. Details and cost ranges are on the Gate Motor Repair in Pasadena page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pasadena
We work on Viking, Ghost Controls, DoorKing, and Elite systems, among others. Most common control boards and limit switches for these brands are stocked locally, so a motor repair in Pasadena doesn’t have to wait on a parts shipment. See the full list on our brands page.
Pricing for Gate Company in Pasadena, CA
| Service | Typical range in Pasadena |
|---|---|
| Gate repair, diagnostic visit | $49 – $99 |
| Gate repair, minor | $150 – $350 |
| Gate repair, major | $350 – $850 |
| Weld repair, steel gate | $150 – $400 |
| Chain replacement | $150 – $300 |
| Wheel or roller replacement | $120 – $250 |
| Hinge replacement or re-seating | $200 – $500 |
| Gate installation, single swing | $1,800 – $4,500 |
| Gate installation, double swing | $3,500 – $8,000 |
| Gate motor repair | $150 – $450 |
| Gate motor, full replacement | $850 – $2,800 |
Two things push Pasadena prices to the upper end of those ranges: hillside driveways that require heavier-duty operators, and older masonry pillars that need reinforcement before new hardware can mount safely. Either way, the number we quote is the number you pay. Every Carver Gate Repair job gets a written price before any work begins, and that price does not move at the door.
Neighborhoods We Serve in Pasadena
We run gate repair and installation across all of Pasadena, from the flat grid south of Colorado Boulevard to the steeper streets climbing toward the San Gabriel foothills. Most Pasadena calls get a same-day or next-day appointment, and emergency gate-down calls are dispatched around the clock.
- Bungalow Heaven
- Madison Heights
- Linda Vista
- Oak Knoll
- Annandale
Service Area – Cities Near Pasadena
Beyond Pasadena, our crews cover the surrounding communities. Homeowners in Altadena, CA call us for the same gate repair and motor work we run in Pasadena, and we also take jobs in San Marino, CA, San Gabriel, CA, and South Pasadena, FL. If you’re just outside these areas, call and we’ll confirm coverage before you book anything.
Serving Pasadena, CA – Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pasadena
Most Pasadena calls are scheduled same-day or next-day. A gate stuck open at night is treated as an emergency, and our phones are answered by a live person 24/7. Call (469) 530-2485 and we’ll give you a real arrival window, not a voicemail promise.
In many Pasadena neighborhoods, replacing an existing gate with one of similar size and style does not trigger a permit. Properties inside historic-district overlays may need design review first. We’ll confirm what applies to your address at the estimate, before you’ve committed to anything.
We serve all of Pasadena plus Altadena, San Marino, San Gabriel, and South Pasadena. If your home is just outside that circle, call (469) 530-2485 and we’ll tell you straight whether we can dispatch to your street. No routing games, no subcontractor handoffs.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.