Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Denton
We install driveway, pedestrian, sliding, swing, double, and security gates in Denton, and we work on the soil conditions here every week. When you call (469) 530-2485, a real person answers and schedules a time for a uniformed, background-checked technician to measure your opening, check your ground, and give you a written price before any work starts. We’re not a general contractor that sometimes hangs a gate. Gates and gate motors are what we do, and we’ve been doing it since 2008 under the Garrison Standard.
Key takeaways for Denton homeowners:
- Denton’s expansive black clay swells and shrinks with moisture, so post footings must be set deeper and wider than what most installers assume.
- A typical driveway gate installation in Denton runs $3,800 to $9,500 depending on gate size, material, and whether you’re adding an operator.
- Every job gets a written price before work begins, and every installation is backed by our 365-Day Done Right Promise in writing.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
Why Carver Gate Repair Is Denton’s Preferred Gate Installation Company
Denton homeowners have dealt with enough no-shows and changing quotes. We run a different process. Dispatched from the Dallas-Fort Worth office that coordinates our crews, every technician who arrives at your home in Denton is background-checked, uniformed, and working to the Garrison Standard: written prices, clean job sites, and a written guarantee on every installation. The phone is answered by a live person 24 hours a day, seven days a week, including weekends and holidays. You won’t reach a voicemail box.
Our work in Denton shows up in the way we handle this area’s specific problems. We know the alleys off Scripture Street, the older lots near Texas Woman’s University, and the acreage-style properties north toward University Drive where sliding gates are more common. That local familiarity means we don’t quote a gate over the phone without understanding your ground, your setback, and what your HOA in neighborhoods like Robson Ranch or Forestridge might require.
Lonnie Burke runs the Carver Gate Repair team, and he holds every technician to the same standard he’d hold for a gate on his own property. If an installation isn’t done right, you get a free second visit within the guarantee window. No charge, no argument.
Driveway Gate Installation in Denton
Driveway Gate Installation in Denton is a job that starts underground. The black clay here, especially through the wet spring months and the dry summers, moves more than most people realize. Set a hinge post two feet deep and the gate sags within a year. We set post footings for driveway gates at 30 to 36 inches with a wider bell base, because that’s what this soil requires. The gate itself, the operators, the safety edges, the photocells, all of that rides on the footing. Get the footing right and the rest holds.
A single swing driveway gate in Denton, mild steel with a basic powder coat, runs $4,200 to $6,800 installed with a motor. A double swing gate runs $6,500 to $9,500. That includes the footing excavation, concrete, posts, gate fabrication, operator, safety photocells, and full cycle testing. Add-ons like ornamental iron pickets, fence line tie-ins, or a keypad entry typically run $400 to $1,200 more depending on what you choose. We quote the whole job in writing before you pay a dollar.
Swing Gate Operators and Entrapment Protection
When we put an operator on a swing gate in Denton, we don’t just bolt it to the post. We check the post’s set depth and confirm it’s cured and sized for the gate’s weight. Then we mount the operator and run the full UL 325 safety checks: photocells wired to reverse the gate if a child or a dog crosses the path, and force settings tested so the gate reverses rather than pushes through an obstruction. Skipping this is how people get hurt. We test it and we prove it works before we leave.
What a Proper Driveway Gate Footing Looks Like
In the sandy soil over in Frisco you can get away with a shallower post. Not in Denton. The clay here swells when it’s wet and shrinks when it’s dry, and that movement will heave a shallow post out of level. A proper footing for a driveway gate post here is 36 inches deep with a wider bell shape at the base for resistance. On a recent install near South Lakes Park, we pulled out an old hinge post that had been set only two feet deep and watched the gate sag right along with it. We poured a new footing at full depth, welded new hinge plates, and mounted a LiftMaster operator with a rack and pinion drive. The gate has stayed level through two full wet seasons.
Sliding Gate Installation in Denton
Sliding Gate Installation in Denton makes sense on a lot of the properties we see north and east of downtown, where the driveway slope or the setback doesn’t leave room for a swing gate to arc. A sliding gate rides on a track and rolls sideways instead of swinging, which is also the better choice when you’re working with a steep grade or a driveway that meets the road at an angle. We install cantilever and track-based sliding gates, and the choice between them usually comes down to how much ground movement you’re dealing with. In Denton’s clay, a cantilever design often wins because the gate doesn’t drag a track through mud and shifting soil.
Sliding gate installation in Denton typically runs $5,200 to $8,800 for a single leaf with an operator, depending on gate length, material, and whether you need a track system poured or a cantilever setup built. The concrete pad for the track, where one is used, needs to be sized for the gate’s travel length and anchored for the shifting ground. We pour it right and we let it cure before we set the gate, because a track that sinks or shifts is a gate that binds.
Choosing Between Track and Cantilever
A track-guided sliding gate is less expensive up front, but the track has to stay clean and level. That’s hard in Denton’s clay, which moves enough to cause binding if the pad wasn’t properly reinforced. A cantilever sliding gate rides on rollers set on posts and never touches the ground, which means no track to clog with mud or leaf litter. If you’re on an acreage property off FM 2164 or out toward Krum, where gates are longer and heavier, the cantilever setup is usually what we recommend even though it costs more at the start.
Power and Safety Edge Requirements
Sliding gates are heavy, and an operator that grinds against a misaligned rack and pinion burns itself out. We mount operators on posts that have been set and cured to carry the full gate weight, and we align the rack so the gate rolls without binding. Then we wire the safety edges and photocells so the gate stops and reverses if anything gets in the path. Every automatic gate we install in Denton gets tested for UL 325 compliance before we walk away.
Trusted Brands We Service in Denton
We work on nine gate-motor brands, and three of the most common on Denton properties are FAAC, BFT, and Linear. FAAC operators are popular on heavier swing gates and we see BFT frequently on sliding gates at the newer subdivisions. Linear shows up on a lot of the driveway gates built in the last decade. Because we’re a gate specialist, not a generalist, we stock common parts for these systems and we know their failure points without reading a manual on your dime. If you already have an operator on an existing gate, we can often replace just the motor and the control board, and that’s a faster and cheaper fix than ripping out the whole gate. We’ll tell you straight whether the old post and operator are worth keeping.
Common Gate Installation Problems We See in Denton Homes
- Hinge posts set too shallow for black clay. Denton’s expansive clay heaves with moisture changes, and a post set at two feet will work its way out of level. The gate sags, the latch stops lining up, and the operator starts binding within the first year.
- Operators mounted on undersized or uncured footings. We see operators twisted right off their mounts because the post wasn’t sized for the gate weight or wasn’t left to cure before the motor went on. The gate gets heavier in wet weather and the rack and pinion bind.
- Safety photocells skipped or miswired. An automatic gate that doesn’t reverse on contact is a UL 325 failure and a real hazard, especially around kids and pets. Some installers leave the entrapment protection off entirely. We test every gate after installation to confirm it reverses under load.
- Track systems set into moving ground. For track-guided sliding gates, a concrete pad poured without enough reinforcement will crack and shift in Denton’s soil. The track goes out of level, the gate binds, and the motor burns out early.
Pricing for Gate Installation in Denton, TX
Here’s what you can expect to pay in the Denton market:
| Gate Type | Price Range in Denton |
|---|---|
| Single swing driveway gate with operator | $4,200 – $6,800 |
| Double swing driveway gate with operator | $6,500 – $9,500 |
| Sliding gate (track) with operator | $5,200 – $8,800 |
| Cantilever sliding gate with operator | $6,000 – $9,000 |
| Pedestrian gate installed | $800 – $2,200 |
These ranges cover the footing, posts, concrete, gate fabrication, operator, safety edges, photocells, and full testing. What moves your price within the range is gate size, material, whether you have an existing gate you’re keeping, and any electrical run from the house or panel. We give you a written quote before any work starts, so the number you approve is the number you pay. Call (469) 530-2485 to schedule a free measure and get an exact price for your opening.
We Also Serve Cities Near Denton
Our Gate Installation in Denton service reaches the surrounding communities too. If you’re in Krum, Argyle, Sanger, or Aubrey, the same Gate Installation team handles your job with the same written pricing and the same 365-Day Done Right Promise. No matter which side of the county line you’re on, you get a background-checked technician who shows up on time and does the work right.
Serving Denton, TX – Our Local Coverage Area
We’re based in the Denton area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Denton
For a driveway gate in Denton, we set post footings at 30 to 36 inches deep with a wider bell base at the bottom, which is deeper than the standard two-foot set that works in sandier soil. The extra depth is specifically to resist the expansive clay movement. A footing set too shallow will heave within a year. Call (469) 530-2485 if you want us to check the posts on a gate that’s already sagging.
Yes, we install operators on existing gates all the time in Denton, as long as the post footings are sound and the gate itself is structurally straight. We check the set depth, gate weight, and hinge condition before we recommend an operator-only install. If the post is shallow or the gate is sagging, you’re better off replacing the footing and the gate together rather than burning out a new motor on a bad foundation. We’ll show you what we’re seeing and give you a written price either way.
We do. For acreage properties where running power to the gate is expensive or impractical, we install solar gate openers with battery backup. They work with the gate operators from the brands we service, and we size the panel and battery for the gate’s cycle frequency and the shade profile on your property. If you’re out past Sanger or Krum and the gate is a long way from the house panel, solar is often the cleaner solution.
Most sliding gate installations in Denton take two to three days on site, and that doesn’t count the concrete cure time, which is typically five to seven days before we set the gate and mount the operator. In Denton’s clay soil, rushing the cure is a mistake. We’d rather let the footing set properly and schedule your operator install for the following week than put a motor on a post that’s still moving. A typical timeline is: day one excavation and formwork, day two concrete pour, then a return trip once the concrete has cured to hang the gate, set the rack, and run the safety tests.
After every automatic gate install in Denton, we run the full UL 325 test: the gate reverses when the photocell beam is broken, the gate reverses when it contacts an obstruction, the force setting is within the required limits, and the cycle stops clean. We test each safety function at least twice and we show you the results before we leave. If a gate can’t pass the reversal test, it isn’t safe, and we don’t leave until it passes.
Get a Written Price for Gate Installation in Denton
If you’re ready to replace a gate or install a new one at your Denton home, call (469) 530-2485. You’ll get a live person, a scheduled measure, and a written price before any work starts. No gate in Denton should be installed without a proper footing, a properly sized operator, and a safety test that passes UL 325. That’s the Garrison Standard, and that’s what you get with Carver Gate Repair.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Denton, TX.