Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Edmonds
Gate installation in Edmonds is a different job than it is ten miles inland. The hillsides of marine clay and glacial till shift with the rain, and the salt air off Puget Sound works on hinges, operators, and photocells year-round. When a gate is installed without accounting for those conditions, it sags, sticks, or stops reversing safely within a season or two. Carver Gate Repair plans every Edmonds install around the ground it sits on and the air it works in. We schedule a measured, written-price installation and our crews arrive when we say they will. Call (469) 530-2485 for a free estimate.
Why Carver Gate Repair Is Edmonds’s Preferred Gate Installation Company
Homeowners around Edmonds call us after a gate has failed or after another contractor has walked away from a half-finished job. Our crews work to The Garrison Standard: a written price delivered before any work starts, background-checked technicians in uniform on every call, and a written guarantee on every repair, good for a full year. That guarantee is not a verbal promise. It’s on paper, and a second visit inside the guarantee window is free.
We answer the phone around the clock. When a gate is stuck open or a motor has died, a live person picks up, takes the details, and gets a technician scheduled for Edmonds. We don’t use voicemail queues. We don’t route calls through a call center that doesn’t know a swing operator from a loop detector.
Dispatch and scheduling are coordinated from the brand’s Seattle office; crews serve Edmonds locally. That means the technician who shows up at a home near Edmonds Bowl or off Olympic View Drive has completed a background check, wears a Carver uniform, and carries the parts common to the gate and motor brands we service. The work is backed by the Garrison Partners family, operating to The Garrison Standard since 2008.
Sliding Gate Installation in Edmonds
Sliding gate installation is often the right answer on an Edmonds hillside lot where a swing gate would need to fight the grade or where the driveway has no room for a long arc. A slide gate travels on a track or a cantilever system, and on sloped driveways the track elevation and the operator position have to be thought through carefully. On a slope-side lot near the Edmonds waterfront, a poorly placed slide track will bind, and an operator set at the wrong angle will strain against the grade.
We install slide gates with rack and pinion operators, and we run the power, set the loop detector, and wire the safety photocells. Every automatic gate we install includes entrapment protection and is reversal-tested before we leave. A typical driveway slide gate installation in Edmonds runs $6,500 – $14,000 depending on gate size, material, track length, and the condition of the ground the track sits on. A pedestrian slide gate runs lower, usually $3,200 – $6,800.
Sloped Driveway Setups
Edmonds driveways drop fast. A slide gate on a 10 to 15 percent grade needs the operator and the track set so the gate doesn’t creep or bind. We account for the grade when we lay out the track and specify the operator.
Cantilever vs. Track Systems
A cantilever slide gate carries its weight above the ground, which matters in Edmonds because marine clay moves. A bottom track set in shifting clay will need adjustment every season. We’ll recommend which system fits the soil and the site.
Gate Opener Installation in Edmonds
Gate opener installation in Edmonds means matching an operator to a gate that already exists, and to the conditions that gate works in. The marine layer off the Sound shortens the life of control boards, keypads, and photocell connections. We install operators from the brands we service, including Linear, Viking, and Ghost Controls, and we position and seal every connection so moisture doesn’t get a foothold.
A swing gate operator installation in Edmonds typically runs $2,800 – $5,500. A slide gate operator installation runs $3,200 – $6,200, and a heavy-duty hydraulic operator on a larger gate can reach $8,000 – $12,000. The written quote includes the operator, brackets, wiring, safety photocells, and the reversal test. The price is quoted and agreed before any work starts, and that number does not move at the door.
Marine-Layer Wiring Practices
We use sealed junction boxes and corrosion-resistant connectors on every Edmonds install. The connections are the first thing the salt air takes out. We’d rather spend ten extra minutes sealing a connection than have your gate fault out on a rainy February night.
Reversal Testing and Safety Edges
UL 325 entrapment protection is required on automatic gates, and we set and test every safety edge and photocell before the job is done. If the gate won’t reverse cleanly, we don’t call the job done.
Trusted Brands We Service in Edmonds
Our technicians are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Edmonds installs, we commonly specify Linear and LiftMaster operators for slide gates, and Viking or Ghost Controls for battery-backed swing gates. We keep the common boards, remotes, and photocells for these brands stocked for quick turnaround on Edmonds jobs, so a failed control board doesn’t mean waiting on a distributor in Tacoma.
Common Gate Installation Problems We See in Edmonds Homes
- Hinge posts heaved out of plumb. Edmonds hillsides are marine clay and glacial till, and that ground moves when it gets wet. An undersized post footing shifts within a season, and the gate sags and scrapes. We oversize the footing and add drainage.
- Corroded operator and photocell connections. Salt air off the Sound eats unsealed wire connections. A gate that reverses for no reason is often a photocell or a limit switch that has a corrosion bridge across the terminals.
- Missing entrapment protection. Some new automatic gates in Edmonds go in without UL 325 safety edges or a working reversal system, and the homeowner finds out at inspection or the first time the gate closes on a car.
- Phantom loop triggers on sloped driveways. A grade change confuses a poorly placed loop detector. The gate opens or closes when nothing is there. We set loop depth and position so the detector reads a vehicle, not the slope.
Pricing for Gate Installation in Edmonds, WA
A complete automatic slide gate installation in Edmonds runs $6,500 – $14,000. A swing gate installation runs $4,000 – $9,500. A gate opener installation on an existing gate runs $2,800 – $6,200 for most residential operators. What moves the number is gate size and material, the condition of the ground at the post, the length of the power run, and whether the old gate and operator need removal.
Every estimate is free, in writing, and delivered before any work starts. That written price is the price you pay. We don’t open a job and then revise the number upward. If the scope changes because you add something, we quote the addition separately before we do it.
Call (469) 530-2485 and we’ll schedule a measure, give you a written price, and answer any question about the work without pressure.
We Also Serve Cities Near Edmonds
Our crews cover Edmonds and the surrounding communities, including Mountlake Terrace, Lynnwood, Kenmore, and Kingston. If you’re just outside the city limits, we can usually extend our Gate Installation service to your home. If you’re in Edmonds proper, we’ll get a technician out to measure and quote.
Serving Edmonds, WA – Our Local Coverage Area
We’re based in the Edmonds area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Edmonds
Yes. Edmonds sits on marine clay and glacial till, and a standard post footing can heave within a season. We oversize the footing depth and width and add gravel drainage so water doesn’t sit against the concrete and work the post loose. A gate post that moves is the beginning of a sagging gate and a hinge failure. Call (469) 530-2485 and we’ll look at your soil before we quote the footing.
A typical residential gate installation in Edmonds takes one to three days depending on the footing, the gate, and the power run; a complex slide gate on a slope can run longer. We don’t promise same-day installation, and you should be wary of anyone who does. A proper footing needs to cure, the operator needs to be set correctly, and the safety edges and photocells need to be tested. We schedule the work, show up on time, and finish it right.
It will if it’s installed correctly and the connections are sealed. The marine layer off Puget Sound corrodes unsealed terminals and control boards faster than you’d see inland, so on Edmonds installs we use sealed junction boxes and corrosion-resistant connectors, and we position the operator housing to shed water. We also recommend a battery backup if your gate is on the waterfront or exposed to wind-driven rain. Call (469) 530-2485 for an exact quote.
Yes. UL 325 entrapment protection is required on automatic gates, and that includes safety edges, photocells, and a working reversal system that meets the standard. We install and test every safety device on every gate we put in, and we reverse-test the gate before we leave. A gate without working entrapment protection is dangerous and won’t pass inspection.
Most of the time, yes. The main question is the ground and the post condition. If the old hinge post has heaved in the marine clay, we’ll need to pull it and set a new footing regardless. On a sloped driveway, a slide conversion often solves the problem a swing gate can’t, because the gate travels with the grade instead of fighting it. We’ll assess the site and give you a written price before any work starts.
What a Proper Edmonds Gate Installation Includes
A gate installation is more than hanging a panel and bolting an operator to it. On an Edmonds hillside, the ground is the first problem. The footing has to be deep and wide enough for the soil, and it has to drain. The power run has to be up to code, and the operator, loop detector, and safety photocells need to be set so they work together. Then the gate gets reversal-tested, the site gets cleaned, and you get a written guarantee, good for a full year.
We installed a slide gate with a rack and pinion LiftMaster operator at a home off Sunset Ave, where the old hinge post had heaved sideways in the clay. We set a new post footing with proper concrete and drainage, then ran the gate operator and dialed in the loop detector and safety photocell so it reversed cleanly every time. The customer had been quoted a same-day panel swap elsewhere. We showed why the post was the real problem and installed it right the first time.
That’s the difference between a gate that works for a season and one that works for years. If you live in Edmonds and you’re planning a gate, call (469) 530-2485 for a free, written estimate. You’ll get a straight answer on price, a measured plan for the work, and a gate that’s built for the ground it stands on.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Edmonds and the surrounding communities.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.