Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in New Braunfels, TX
We’re Carver Gate Repair, the gate company New Braunfels homeowners call when a driveway gate won’t open, sags on its hinges, or needs a new motor. Our crew works on swing gates, slide gates, and the operators that drive them, and every job goes through the same Garrison Standard: a written price before work starts, background-checked technicians on site, and a written guarantee good for a full year. Whether you’re off Walnut Avenue or out toward Gruene, call (469) 530-2485 and a live person answers.
Why New Braunfels Homes Are Different
New Braunfels gate work has a few conditions that shape how we approach each job. First is the limestone shelf under much of the city. Setting gate posts here means drilling into caliche and rock, not soft topsoil, which makes a proper footer and correct post depth the difference between a gate that holds true and one that leans after two seasons. We set posts to hold against that ground, not in spite of it.
Second is the weather. New Braunfels summers run hot and humid, with afternoon storms that roll through fast. Gate electronics exposed to that cycle need sealed connections, and we use them as a matter of course on every motor and loop detector job. Third is the housing mix: older properties in and around downtown, newer builds in the master-planned communities, and rural acreage lots with long driveways and heavier custom gates. Each one wants a different hinge, a different operator, and a different eye toward drainage and grade. That local spread is why we carry parts for swing and slide systems and stock motors from DoorKing, Viking, and Elite so the repair doesn’t wait on a shipment from out of state.
Our Main New Braunfels Services
Most New Braunfels calls fall into one of three buckets: a gate that has stopped working, a gate that needs to be replaced outright, or a motor that runs but won’t move the gate. Each service has its own page with local pricing and detail.
Gate Repair in New Braunfels
A failing gate in New Braunfels is usually one of three things: a hinge or roller that’s worn, a weld that’s cracking, or a gate that has shifted on its post after a hard wind or a bump from a vehicle. We replace hinges, rebuild sagging sections, repair cracked welds, and reset posts that have moved. Every repair gets the written quote first, and the one-year guarantee covers the work. For a full breakdown of what a repair involves and what it costs, see Gate Repair in New Braunfels.
Gate Installation in New Braunfels
New Braunfels installations range from standard driveway swing gates in HOA communities to long slide gates on acreage outside the city core. We handle the full job: removing the old gate, setting posts to hold against the limestone, hanging the new gate, and adjusting the operator if one is already in place. A new gate is measured and scheduled, not rushed. We come out, take measurements, and hand you a written price before anything gets ordered. Details are on Gate Installation in New Braunfels.
Gate Motor Repair in New Braunfels
When the gate itself is fine but the motor won’t respond, the problem is usually in the operator: a limit switch that’s out of adjustment, a loop detector that’s not sensing the vehicle, or a control board that’s failed. We work on the motor and its controls, not just the metal gate around it, and we stock parts for the brands most common in New Braunfels, including Viking and Ghost Controls. For motor-specific pricing and repair detail, see Gate Motor Repair in New Braunfels.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in New Braunfels
Our technicians work on DoorKing, Viking, Elite, and Ghost Controls systems, among others, and we keep common parts for those brands on our trucks. That cuts turnaround time on a New Braunfels repair because we’re not waiting on a distributor. For the full list of what we service, see our brands.
Pricing for Gate Company in New Braunfels, TX
| Service | Typical range in New Braunfels |
|---|---|
| Gate repair (hinge, weld, or sag) | $150 – $500 |
| Gate motor replacement | $600 – $1,400 |
| Gate motor repair | $150 – $450 |
| Control board replacement | $250 – $600 |
| Limit switch adjustment or replacement | $100 – $300 |
| Loop detector replacement | $200 – $500 |
| Swing operator installation | $800 – $1,800 |
| Slide operator installation | $900 – $2,200 |
| Full gate installation (standard driveway swing) | $1,500 – $4,500 |
| Full gate installation (custom or slide, long driveway) | $3,000 – $8,000+ |
| Gate post reset (including concrete) | $300 – $700 |
| Remote or keypad addition | $100 – $300 |
Price depends on gate length, the operator’s condition, and access to power. Rock-heavy digging for a post reset on a limestone lot will push a job toward the higher end. Whatever the number, you see it in writing before we start, and that number is the number you pay.
Neighborhoods We Serve in New Braunfels
We cover all of New Braunfels and the immediate area, including the neighborhoods below. Most repair calls can be scheduled within one to two business days, and emergency calls get a live person on the phone at any hour.
- Gruene
- Downtown New Braunfels
- Oak Run
- Copper Ridge
- Mission Hills
Service Area – Cities Near New Braunfels
Beyond New Braunfels, our crews also cover Seguin, TX, San Marcos, TX, Cibolo, TX, and Schertz, TX. Dispatch and scheduling for the area are coordinated from our San Antonio office, and the same Garrison Standard applies on every job, in every city.
Serving New Braunfels, TX – Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in New Braunfels
Most repair calls in New Braunfels can be scheduled within one to two business days. For a gate stuck open or a gate that won’t close on a home or business, call (469) 530-2485 and we’ll work the dispatch as fast as the schedule allows. Phones are answered by a live person around the clock.
It depends on the property. Many New Braunfels HOA communities have design guidelines or approval steps before a new gate goes in. We can’t apply for you, but we can provide the spec sheet and measurements your HOA or the city asks for. A repair to an existing gate generally doesn’t need anything.
We cover all of New Braunfels and the surrounding area, including the neighborhoods along FM 306 and the acreage lots outside the city. If you’re not sure whether your address is in our coverage area, call (469) 530-2485 and the person who answers will confirm it directly.
For a written quote or to schedule a repair in New Braunfels, call Carver Gate Repair at (469) 530-2485. The price you’re quoted is the price you pay, and every repair is backed by a written one-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What New Braunfels Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.