Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Berkeley, CA
Carver Gate Repair is the gate company Berkeley homeowners call when a gate stops opening, a hinge starts sagging, or a motor quits without warning. We work on gates and gate systems across the city, from the Craftsman bungalows of Northbrae to the hillside homes above the Cal campus. Berkeley’s older housing stock, steep lots, and coastal moisture create a specific set of problems that generic contractors often misdiagnose. We fix them the first time, with a written price before any work begins. For immediate service, call us at (469) 530-2485.
Why Berkeley Homes Are Different
Berkeley’s residential landscape runs from flat streets near San Pablo Avenue to steep, winding roads in the hills, and gate work changes with the terrain. Hillside driveways often mean gates installed on a slope, which puts constant load on hinges, posts, and operators. A flat-lot gate in West Berkeley ages differently than a hillside gate in the Claremont district, and the right repair accounts for that.
Marine air is another factor. Morning fog off the Bay settles over the flats and pushes damp, salty air into metal components. We regularly find corroded limit switches and rusted hinge bearings in Berkeley that would still look nearly new twenty miles inland. Gate motors with exposed circuit boards fail earlier here unless they’re properly sealed and maintained.
Much of Berkeley’s housing stock dates from the 1920s through the 1960s. That means narrow driveways, original iron gates, and older electrical service. Many of these gates were built for a different era, before modern vehicle sizes and current code requirements. Some Berkeley neighborhoods also have zoning overlays that affect fence and gate height, so written communication with the planning department matters more here than in surrounding cities. If a gate project involves a shared property line or a corner lot, we flag it before the first cut is made.
Our Main Berkeley Services
Most Berkeley calls to Carver Gate Repair fall into three categories. Each service has its own Berkeley page with detailed pricing, timelines, and local notes. Click through to any that applies to you.
Gate Repair in Berkeley
Gate repair in Berkeley covers sagging hinges, rusted frame joints, bent posts, broken welds, and gates that no longer latch or close square. Hillside lots make this work more involved than in the flatlands, because gravity works against the gate every time it cycles. We straighten or replace posts, re-hang the leaf, repair or replace hinge hardware, and leave the gate closing cleanly again. For a full breakdown of what a Berkeley repair involves and what it costs, visit our dedicated Gate Repair in Berkeley page.
Gate Installation in Berkeley
New gate installation in Berkeley starts with the driveway. Slope, soil, and setback all determine post depth, hinge selection, and whether the gate should swing or slide. We build installations around the existing property, not a catalog drawing, and we size the frame for the gate’s actual weight and the wind exposure of the site. Measurement is free, and the written quote includes everything from post-setting to hardware and final adjustment. Details on materials, lead times, and Berkeley-specific code considerations are on our Gate Installation in Berkeley page.
Gate Motor Repair in Berkeley
Gate motor repair in Berkeley usually comes down to one of three things: a failing limit switch, a damaged loop detector, or an operator that’s been overpowered by a gate that no longer swings freely. We diagnose the system by brand, because a Viking operator and a Ghost Controls board fail differently and need different parts. Our technicians are trained on nine major gate-motor brands, so the fix is matched to the motor already on the gate. For motor-specific pricing and same-visit diagnostics, see our Gate Motor Repair in Berkeley page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Berkeley
We carry parts for Viking, Ghost Controls, DoorKing, and Elite gate systems, along with five other major brands. If a Berkeley repair needs a board, limit switch, or arm replacement, we usually have the part on the truck or in local Bay Area stock for next-day pickup. See the full lineup on our brands page.
Pricing for Gate Company in Berkeley, CA
| Service | Typical range in Berkeley |
|---|---|
| Gate hinge replacement or repair | $180 – $480 per hinge |
| Gate wheel or roller replacement | $120 – $280 |
| Gate post repair or reset | $350 – $800 per post |
| Welding repair on an iron gate | $250 – $650 |
| Full gate replacement (standard steel or aluminum) | $1,800 – $5,500 |
| Custom gate installation (wood or ornamental iron) | $2,500 – $8,000 |
| Motor replacement and installation | $900 – $2,300 |
| Control board replacement | $350 – $900 |
| Loop detector repair or replacement | $250 – $650 |
| Safety sensor and photo-eye repair | $150 – $400 |
Two things push Berkeley prices toward the upper end of these ranges: hillside access and older gate frames. When a gate has to be worked on from a sloped driveway, or when a 60-year-old iron frame needs more welding than expected, the job takes longer. Whatever the final number is, you get it in writing before any work starts, and that’s the number you pay.
Neighborhoods We Serve in Berkeley
Carver Gate Repair works across all of Berkeley, including the hills and the flats. Scheduling is handled locally, with dispatches coordinated from our San Francisco Bay Area office. Typical response is same-day for urgent repairs and next-day for scheduled work, depending on your location and the time of the call.
- North Berkeley and Northbrae
- Berkeley Hills and the Claremont district
- West Berkeley and Ocean View
- South Berkeley and the Elmwood district
- Downtown Berkeley and the Cal campus area
Service Area – Cities Near Berkeley
We also serve the neighborhoods just beyond the Berkeley border. If you’re across the line in Emeryville, CA near the marina, Albany, CA to the north, El Cerrito, CA up the East Bay hills, or Piedmont, CA to the southeast, you’ll get the same live-person scheduling and written-price process. Same crew standards, same guarantee.
Serving Berkeley, CA – Our Local Coverage Area
We’re based in the Berkeley area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Berkeley
Most urgent gate failures in Berkeley can be seen same-day when you call before early afternoon. Non-urgent and scheduled work is typically next-day or within two business days. Every call goes to a live person, day or night, so you’ll never leave a voicemail and wait.
It depends on the location and the gate’s height. Some Berkeley zoning districts restrict fence and gate height, and corner lots have additional sight-line rules. We’ll flag any permit questions before the job starts, and the written quote will reflect whatever the city requires. Call (469) 530-2485 and we’ll walk through your specific property.
Yes. Every repair carries the 365-Day Done Right Promise, in writing, good for a full year from the date of service. If the same part or repair fails inside that year, we come back and make it right at no charge. That policy is standard on every Berkeley job.
For a free estimate on any gate, motor, or installation job in Berkeley, call Carver Gate Repair at (469) 530-2485. You’ll get a real person on the phone, a written price before any work starts, and a full-year guarantee on every repair.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Berkeley Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.