Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Margate
Gate installation in Margate typically runs $1,600 – $4,200 for a fabricated gate with motor, depending on size, power access, and whether the property has a swale or canal easement that requires deeper post footings. We coordinate every Margate job through our South Florida crew, and a site measure is always the first step. No same-day promises on installation work: a proper gate is measured, fabricated, and scheduled, then installed with a written price agreed before anything goes in the ground. Call (469) 530-2485 for a free measure and a firm quote.
Why Carver Gate Repair Is Margate’s Preferred Gate Installation Company
Margate homeowners don’t call us for a cheap gate. They call because the last contractor no-showed, or the track shifted within six months, or the invoice grew after the post holes were dug. We run every Margate install to the Garrison Standard: written prices, background-checked and uniformed technicians, and a 365-Day Done Right Promise that is in writing on every job. If the gate fails inside a year, we come back free. That is the whole agreement, and it is the same agreement for a pedestrian gate on a side yard in Margate’s NW 15th Street corridor or a double swing gate near the Holiday Springs neighborhood.
Lonnie Burke leads our crews on these installs, and the Margate calls come through a live person, 24/7. No voicemail box. When a homeowner on Royal Palm Boulevard calls at 8 a.m. asking whether a swale-side post needs a deeper footing, they get a straight answer from someone who has actually set posts in that soil. That matters here.
Gate Fabrication in Margate
Gate fabrication in Margate means building the gate to the property, not pulling a stock panel off a warehouse shelf. We size the frame to the opening, weld or bolt to a square and true set of posts, and account for the ground the gate will swing over. A fabricated pedestrian gate in Margate typically runs $1,600 – $3,000 including post setting and a basic latch; a driveway swing or slide gate runs $2,800 – $4,200 before automation, depending on width and whether the frame is aluminum or galvanized steel. The price is written and agreed before any fabrication starts.
Hinge Post and Swale Footings
A gate fabricated for a Margate lot with a swale or canal easement needs more than a bag of concrete around each post. We dig deeper below grade, use a wider footing, and set the post so drainage slopes away from the base, not into it. A hinge post that settles even half an inch makes a swing gate drag or fail to latch.
Frame, Rail, and Weight
A heavier gate moves differently than a light one, and the frame has to survive Margate’s wet season without twisting. We spec the top and bottom rails to the leaf width, and we don’t hang a fabricated gate on hinges that are sized for a lighter panel. Every fabrication ends with a documented square, level, and swing check.
Automatic Gate Installation in Margate
Automatic gate installation in Margate means running a dedicated circuit, mounting an operator rated for the gate’s weight, installing UL 325 safety photocells or edge sensors, and testing reversal through the full travel. A swing operator with controls, keypad, and two remotes typically adds $1,200 – $2,600 to the gate cost. A slide operator is usually $1,400 – $3,000, especially when a rack and pinion has to be set on a reinforced track. We don’t promise automatic installs in a day. A clean install runs a day or two once the gate is fabricated and the power is confirmed.
Power Run and Dedicated Circuit
Many Margate homes don’t have a usable outlet at the gate location. If the operator will share a circuit with outdoor lighting or a pool pump, it will nuisance-trip or fail under load. We run a dedicated line and a proper conduit to the operator, and we won’t cut into drywall or leave exposed conduit across a walkway.
UL 325 Safety Testing
Entrapment protection is not optional, and Broward County inspections will flag missing photocells or unverified reversal. On every automatic install, we set a photocell or edge sensor, test reversal against a measured obstruction, and leave the homeowner with confirmation that the system meets UL 325 before we clean up the site.
Trusted Brands We Service in Margate
We install and program operators from Viking, Ghost Controls, and DoorKing, matched to the gate layout and the local power setup. A long double swing gate near the fairgrounds side of Margate takes a different operator than a short pedestrian gate off SR 441. We stock common parts for these brands locally, which cuts the wait when a control board or limit switch fails after a lightning storm, a common event during Margate’s summer afternoons.
Common Gate Installation Problems We See in Margate Homes
- Settling hinge posts in sandy, wet soil. Margate’s ground drains fast but swells in the wet season. A post set without a deeper footing rotates, the gate sags, and the latch can’t reach the striker.
- Missing or undersized power at the gate location. A homeowner buys a swing operator, then we arrive and find no circuit within 40 feet. The install stalls until a dedicated line is run correctly.
- Slide gates binding on tracks after rain. A shallow track set in a low spot fills with sediment off the swale. The gate then drags, and the motor overheats or strips the rack.
- Skipped entrapment protection. A gate that reverses by force only, with no photocell or edge sensor, is a hazard and will fail a Broward County inspection. This is the most common reason we’re called to correct another contractor’s install in Margate.
Pricing for Gate Installation in Margate, FL
Margate gate installation prices fall into a tight band. A fabricated pedestrian gate runs $1,600 – $3,000. A driveway swing or slide gate runs $2,800 – $4,200 without automation. A swing operator adds $1,200 – $2,600; a slide operator adds $1,400 – $3,000. Deeper swale footings add $300 – $700 per post when the ground needs it, and a dedicated power run is quoted after a site measure. Every quote is written and fixed before work starts. The number does not move at the door. Call (469) 530-2485 for a free measure, and you’ll have a written price in hand before any material is ordered.
We Also Serve Cities Near Margate
Our crews cover Margate and the surrounding Broward County communities, including Coconut Creek, Coral Springs, Pompano Beach, and Plantation. If your property sits near the Coconut Creek line or you’re searching Gate Installation for a home in Plantation, the same Garrison Standard applies: written pricing, background-checked technicians, and a full-year guarantee. See what Margate homeowners can expect from Gate Installation in Margate before scheduling a measure.
Serving Margate, FL – Our Local Coverage Area
We’re based in the Margate area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Margate
Yes, most Margate gate installations require a permit through the City of Margate or Broward County, and any automatic operator must meet UL 325 entrapment protection standards, which typically means a follow-up inspection. We’ll confirm the exact permit path for your property during the free measure, and our work is set up to pass the first time. Call (469) 530-2485 and we’ll walk you through it.
After the site measure and permit approval, fabrication takes 2 – 4 weeks, and the install itself runs 1 – 2 days for a standard gate once power and footings are confirmed. Swale-side post work or a dedicated power run can add a day. We schedule a firm arrival window and never promise a same-day install.
Yes, and it should be part of the plan from the start. A swale or canal easement along the property line usually means a deeper post footing and drainage that moves water away from the gate base, or the gate will settle and drag within a season. We price Margate swale work honestly, and the written quote shows it as a line item, not a surprise later. Call (469) 530-2485 for a free measure and an exact number.
We install Viking, Ghost Controls, and DoorKing operators, selected by gate weight and how the property drains. For a slide gate near a swale in Margate, we lean on a DoorKing with a reinforced track and a proper rack; for a lighter swing gate, a Ghost Controls or Viking unit is often the right fit. The operator model is named in your quote, along with its warranty.
Every new automatic gate in Margate should include UL 325-compliant photocells or edge sensors, a reversing mechanism tested against an obstruction, and a keypad or keyed entry for emergency access. These are standard in our installs and documented before we leave. Call (469) 530-2485 for a free estimate that includes the full safety package.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Margate gate installations to the Garrison Standard since 2008.