Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Lynnwood
A new gate installation in North Lynnwood typically runs $2,800 – $6,500 for a standard residential driveway gate with operator, and most projects are measured, quoted, and scheduled within a week. We’re Carver Gate Repair, and our Gate Installation crews work out of our Seattle coordination office with trucks stocked for the North Lynnwood market. We know the difference between a level lot off 196th Street SW and a sloped driveway up near Alderwood Mall Parkway, and we measure both before we quote. Call (469) 530-2485 for a free, written estimate.
Why Carver Gate Repair Is North Lynnwood’s Preferred Gate Installation Company
North Lynnwood homeowners have told us the same thing for years: they called a general contractor who treated the gate like an afterthought to a fence job. We don’t build decks, pour concrete, or hang gutters. Gates and gate motors are what we do.
Our technicians are background-checked and uniformed, and they arrive with the tools and inventory to finish the job in the scheduled window. We answer our phones with a live person, 24 hours a day, including weekends and holidays. No voicemail, no callback queues.
Every installation comes with a written price agreed before any work starts, and our 365-Day Done Right Promise covers the full job for one year from completion. If something fails inside that window, we come back free of charge. That’s The Garrison Standard we’ve operated under since 2008.
We also handle Gate Repair in North Lynnwood and Gate Motor Repair in North Lynnwood, so the same crew that installs your gate can maintain it.
Automatic Gate Installation in North Lynnwood
Automatic Gate Installation in North Lynnwood means fitting a motorized operator to a new swing, slide, or barrier gate and tying it into your property’s power and access controls. Most North Lynnwood homeowners choose automatic installation when they’re replacing a manual gate that’s become a daily inconvenience, or when they’re finishing a new driveway off a busy corridor like 184th Street SW where stopping to open a gate by hand isn’t practical. A typical automatic installation with operator runs $3,200 – $7,800 depending on gate material, size, and access control features.
Operator Sizing and Power Requirements
We match the operator to the gate weight and wind load, not just the width. A solid cedar swing gate on a 16-foot opening near Martha Lake catches more wind than an open-aluminum design, and that affects whether we spec a Linear or Viking operator. We handle the 110V power run from your house to the gate location as part of the installation scope.
Access Control Options
North Lynnwood customers usually want at minimum a keypad and remote entry. We also install loop detectors for free-exit, cellular-based openers for visitor access without running intercom cable, and telephone entry systems for longer driveways common in the neighborhoods north of 196th.
Gate Installation Services in North Lynnwood
Gate Installation Services in North Lynnwood cover everything from a simple pedestrian gate between side yards to a full double-driveway security installation with card readers and safety edges. We measure, fabricate or source, install, and commission every gate we put in. A basic single pedestrian gate in steel or aluminum typically runs $1,400 – $2,800, while a full double swing or slide driveway installation with posts, hardware, and finishing can reach $5,500 – $8,200.
Gate Types and Material Selection
We install steel, aluminum, wrought iron, and wood gates. Aluminum resists the salt air that drifts inland from Puget Sound better than steel, which matters for properties west of I-5 in North Lynnwood. Wood gates look right on Craftsman-style homes near the older neighborhoods south of 184th, but they need heavier posts and hardware to handle the weight.
Post Setting and Foundation Work
North Lynnwood’s clay-heavy soils hold water through the winter and shrink in dry summers. We set gate posts in concrete below the frost line with proper drainage, or we use steel posts with bolt-down base plates on existing concrete. A gate that sags after two seasons usually started with a post that wasn’t set right.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Lynnwood
We stock parts and carry installation inventory for FAAC, BFT, Linear, and Viking operators, plus five additional major brands. That means when a North Lynnwood customer wants a specific motor matched to an existing community system, or when a homeowner’s HOA requires a particular brand for uniformity, we can source and install without the month-long wait times that come from special-ordering. Our Seattle warehouse keeps common FAAC and Linear control boards, limit switches, and safety edge kits on hand, so commissioning happens on schedule, not when the parts finally arrive.
Common Gate Installation Problems We See in North Lynnwood Homes
- Sloped driveways that fight swing gate geometry. Lots near North Lynnwood’s western ridge drop toward I-5, and a standard swing gate will scrape or bind if the post isn’t raked or if a slide gate isn’t spec’d instead. We measure grade with a laser level during quoting so the gate clears the driveway through its full arc.
- Power supply distance from the house. Older homes near 196th Street SW sometimes have the main panel on the opposite side of the house from the driveway. We quote the trenching and conduit run upfront so there’s no surprise when the operator needs 110V at the gate.
- HOA design restrictions on gate style and height. Several North Lynnwood neighborhoods require architectural review before installation. We provide dimensioned drawings and material specs for HOA submission as part of our standard process.
- Poor drainage around gate posts leading to frost heave. North Lynnwood’s wet winters saturate the clay soils. We install gravel drainage beds at the base of every concrete footing, and we use post bases that won’t trap standing water against the steel.
Pricing for Gate Installation in North Lynnwood, WA
Here’s what gate installation costs in the North Lynnwood market based on the jobs we’ve measured and quoted:
| Gate Type | Typical Range |
|---|---|
| Single pedestrian gate (aluminum/steel) | $1,400 – $2,800 |
| Single driveway swing gate, manual | $2,200 – $4,000 |
| Double driveway swing gate with operator | $3,800 – $6,500 |
| Sliding gate with track and operator | $4,200 – $7,200 |
| Security gate with card reader / keypad | $5,500 – $8,200 |
These ranges include the gate, posts, hardware, operator (where specified), standard access control, and labor. What moves the number: gate material and size, operator brand and features, whether we need to run power from the house, and site conditions like slope or rock. We give you a written, itemized price after measuring. The number we write is the number you pay. Call (469) 530-2485 to schedule a free estimate.
We Also Serve Cities Near North Lynnwood
Our Gate Installation in North Lynnwood crews also travel to Seattle, Spokane, Tacoma, and Vancouver for larger projects and commercial installations. Scheduling and dispatch are coordinated from our Seattle office, with local trucks serving each market.
Serving North Lynnwood, WA – Our Local Coverage Area
We’re based in the North Lynnwood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Lynnwood
We typically schedule measurements within 2 – 3 business days, and your written quote follows within 24 hours of the site visit. Call (469) 530-2485 to book a time.
Yes, we work across North Lynnwood including the areas near Alderwood Mall, Martha Lake, and the residential corridors along 196th Street SW and 184th Street SW. Sloped lots, tight side yards, and HOA communities are all within our scope.
We don’t offer same-day installation because gates are measured, fabricated, and scheduled. For a gate that’s failed and needs immediate securing, we offer Gate Repair in North Lynnwood with same-day response. New installations are quoted and booked, usually starting within a week of approval.
North Lynnwood pricing sits in the same band as Seattle and Tacoma for equivalent gates. Slightly lower permit complexity in Snohomish County versus Seattle can save time, and our Seattle warehouse proximity keeps freight costs down. We quote each job to its specific site, not by zip code.
Every installation is backed by our 365-Day Done Right Promise in writing. If any component we installed fails within one year of completion, we return and fix it at no charge. The guarantee is non-negotiable and included on every job, not sold as an add-on.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving North Lynnwood and the greater Seattle area to The Garrison Standard since 2008.