Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across North Richland Hills
Gate installation in North Richland Hills runs $4,200 to $12,800 for a complete automatic driveway gate, depending on gate width, material, and whether the driveway sits on a tight pre-suburban lot or a wider newer development. A new pedestrian gate runs $1,600 to $4,400. We’re Carver Gate Repair, and we install gates and gate motors across North Richland Hills, TX, with written pricing before any work starts. Our technicians know the older residential streets off Boulevard 26, the newer subdivisions south of Loop 820, and everything in between. A live person answers our phones 24 hours a day at (469) 530-2485, including weekends. Scheduling and dispatch are coordinated from our Dallas-Fort Worth office, and crews are routed locally into North Richland Hills every day.
Why Carver Gate Repair Is North Richland Hills’s Preferred Gate Installation Company
We’re not a general contractor that treats a gate as a side project. Gates and gate operators are all we do. Our Gate Installation team installs swing gates, slide gates, pedestrian gates, and double gates, and every technician is background-checked and uniformed when they arrive at your home in North Richland Hills. Lonnie Burke leads our crews, and every job runs on The Garrison Standard, which means a written price before work starts, a written guarantee on every repair, and a free second visit if something fails inside the guarantee window. It’s not a sales pitch. It’s how our crews have operated since 2008.
North Richland Hills homeowners tell us the same things: they’ve had no-shows, they’ve had prices that moved once the gate was apart, and they’ve had a technician leave before the gate actually cycled cleanly. That’s what we avoid by design. When we schedule a gate installation in North Richland Hills, you know the arrival window, you know the price before we start, and you know the job isn’t done until the safety edges, reversal test, and limit switches all check out. A gate that works for a week is not a completed installation.
Our local technicians know which North Richland Hills streets have narrow approaches off the original 1950s and 1960s plats, where the driveways are short and angled toward the property line. We spec the gate operator around that geometry instead of forcing a stock kit into place. That’s the difference between a gate that runs smooth for years and a gate that binds and faults every few months.
Electric Gate Installation in North Richland Hills
Electric Gate Installation in North Richland Hills typically runs $5,200 to $12,800 for a full automatic driveway gate system, including the gate, operator, power run, safety photocells, and a keypad or intercom entry. The job starts with a site measure where we check the driveway approach, set back to the property line, power access, and the condition of the ground where the post footings will go. In older North Richland Hills neighborhoods near Boulevard 26, those footings often need to be dug deeper than what a stock installation assumes, because the original plots were cut before modern setback rules and the clay soil shifts.
After the measure, we give you a written price. Nobody starts digging until that number is agreed to. We handle the concrete work, the steel or aluminum gate fabrication, the operator mounting, the low-voltage wiring, the safety devices, and the cycling test at the end. When we leave, the gate opens and closes smoothly from the keypad, the remote, and the entry loop if you have one installed.
Operator and Power Run
We match the operator to the gate type and the driveway geometry, not the other way around. On a slide gate, that means a rack-and-pinion drive with a properly sized motor. On a swing gate, it means an articulating arm or in-ground operator depending on the pillar spacing. The power run gets sized for the loop detector and photocell, not just the motor. Undersized wiring is a common cause of operator faults on older North Richland Hills properties where someone reused existing conduit.
Safety Edges and Reversal Testing
Every automatic gate in North Richland Hills must have entrapment protection: a sensitivity setting that stops and reverses the gate on contact, plus photocells that stop the gate before contact. We install both and run the reversal test multiple times with the gate under load before we call the job done. This is not optional work. UL 325 requires it, and a gate without working entrapment protection is a liability sitting in your driveway.
Driveway Gate Installation in North Richland Hills
Driveway Gate Installation in North Richland Hills costs $4,200 to $11,500 depending on the gate width, material, and whether it’s a single swing, double swing, or slide gate. The biggest cost drivers we see locally are concrete footings, cantilever hardware, and the operator itself. On a standard single driveway gate, plan for the gate, the operator, the keypad, and the safety photocells as a complete package. Half-measures cost more later.
We don’t install a gate without addressing the foundation. A post set in shallow soil will lean, the gate will sag at the hinge post, and you’ll be fighting the latch within a season. On North Richland Hills properties with older, clay-heavy ground, we dig footings below the local frost line and core the post base into solid bearing, not just pour around it and hope.
Slide Gate Fit and Geometry
Slide gates are common on tighter North Richland Hills driveways where a swing gate doesn’t have room to arc. The track or cantilever run needs clear space equal to the full gate width plus six inches, and the operator needs a level rail to bite onto. We set the run first, then the post, then the gate. Order of operations matters, and it’s where a lot of generalist installs go sideways.
Double Gate Installation
Double swing gates use two leaves meeting in the middle, which halves the swing arc but doubles the hardware: two hinges, two operators or a master-and-slave link, and a drop rod for the inactive leaf. We install both leaves bored and welded square before the operators go on. A double gate that isn’t aligned at the center stop will bind and throw fault codes every time the wind picks up or the temperature shifts.
Trusted Brands We Service in North Richland Hills
We work on nine gate-motor brands so we’re not tied to one manufacturer’s parts list. For North Richland Hills customers, the operators we install most often are FAAC, BFT, and LiftMaster, with Linear and Viking showing up on a lot of the older systems around the city. That matters when a homeowner calls with a gate that worked fine for ten years and then quit. We know the failure points, the motor sizing math, and whether the fix is a limit switch or a full operator replacement. We keep common parts stocked locally, so a repair call in North Richland Hills usually doesn’t wait on a backordered board from out of state. The right parts and the right know-how beat a parked truck and a shrug.
Common Gate Installation Problems We See in North Richland Hills Homes
- Tight approach geometry off the older core streets. The original North Richland Hills plats around Boulevard 26 and 26 Boulevard often put driveways feet from the property line, which forces gate operators into angles a stock kit can’t handle. We spec slide gates and narrower swing arcs rather than forcing a standard pull.
- Shallow post footings in clay-heavy soil. North Richland Hills ground holds water and swells, so a post set in an 18-inch footing will move. Every new installation gets footings dug to the required bearing depth, not just what’s convenient for the auger.
- Reused wiring that starves the safety circuit. Homeowners near the older core sometimes want to keep the old conduit and wire to save money. The loop detector and photocells draw current too, and undersized wire causes intermittent faults that look like a bad motor. We pull a new, correctly sized power run.
- Rack and pinion wear on mismatched slide gates. When a slide gate is hung on the wrong track angle or the operator’s rack isn’t meshed true, the rack teeth wear fast and the gate shudders. We’ve seen it on several North Richland Hills properties where the gate was retrofitted after the driveway was already poured.
Pricing for Gate Installation in North Richland Hills, TX
A pedestrian gate in North Richland Hills runs $1,600 to $4,400 installed. A single automatic driveway gate runs $4,200 to $8,900. A double gate or slide gate runs $7,800 to $12,800 when you include concrete, the operator, safety devices, and the entry keypad. Steel gates cost more than aluminum, but aluminum is lighter and easier on the operator. Wrought-iron styles run toward the higher end. The ground under the driveway matters too; if we’re breaking out old concrete to set new footings, that’s part of the quote, not a surprise line item later. Every job gets a written price before any work starts. Call (469) 530-2485 for a free estimate, and we’ll walk the site and give you actual numbers for your gate, not a ballpark from a call center.
We serve North Richland Hills directly, and our technicians know the city’s neighborhoods, not just the highway exits.
We Also Serve Cities Near North Richland Hills
Beyond North Richland Hills, our crews cover Hurst, Haltom City, Bedford, and Colleyville. So if you live near a boundary street and you’re not sure whether you’re in North Richland Hills or Hurst, call (469) 530-2485. We’ll confirm coverage and schedule a free site measure from our DFW office.
Serving North Richland Hills, TX – Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in North Richland Hills
A full gate installation in North Richland Hills takes two to four days from measure to final test, depending on concrete cure time, gate fabrication, and operator availability. We don’t promise same-day installation because our standard is that the gate runs correctly when we leave, and concrete needs a day to set before an operator goes on it. Call (469) 530-2485 to schedule a free measure and written quote, and we’ll give you an honest timeline for your specific site.
Yes. Under UL 325, a new automatic gate in North Richland Hills must have entrapment protection: a reversing mechanism that detects contact and a photocell that stops the gate before contact. We install both on every automatic gate we put in, and we test the reversal under load before the job is complete. A gate installed without this protection is a safety hazard and should be corrected immediately.
Yes, but the gate type and operator placement have to match your driveway geometry. On the older North Richland Hills lots near Boulevard 26, we often use a slide gate instead of a swing gate when the approach is too short for a full arc. We’ll measure the setback, check the property line, and spec the operator accordingly. Call (469) 530-2485 for a free site measure, and we’ll tell you what works on your specific lot.
We install LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. We’re familiar with all nine, so we match the operator to the gate type and weight, not the other way around. We keep common parts in stock for North Richland Hills calls, so a needed replacement doesn’t sit waiting on a freight truck.
In North Richland Hills, a new gate usually sags because the post footing was too shallow or was poured over shifting clay soil. When moisture cycles through the ground, the soil swells and settles, the post moves, and the gate droops at the hinge or latch post. We dig footings below the frost line and core the post into solid bearing specifically to prevent that. We saw a slide gate off Boulevard 26 where the approach was too short for a swing gate, so we installed a rack-and-pinion slide with the footing deep enough to clear the utility easement; the same principle holds, and it has held since.
Call Carver Gate Repair for Gate Installation in North Richland Hills
If you’re in North Richland Hills and you’re tired of chasing contractors who no-show or quote one price and charge another, call us at (469) 530-2485. We answer the phone live, 24/7. We’ll send a background-checked, uniformed technician to walk your property, check your gate or gate site, and give you a written price before any work starts. That’s The Garrison Standard. That’s how we operate in North Richland Hills, TX, and it’s how we’ve worked since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving North Richland Hills with written pricing, background-checked technicians, and a full-year guarantee.