Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pasadena
Gate installation in Pasadena, CA runs $2,400 – $7,800 for a standard automatic driveway gate, depending on the gate style, motor brand, and what has to happen under the ground before the first panel goes up. That’s the honest range in this market, and it’s the number you’ll see on a written quote before any work starts. We dispatch uniformed, background-checked technicians to Pasadena neighborhoods including Bungalow Heaven, Hastings Ranch, and the Linda Vista area, and our phones are answered by a live person 24/7 at (469) 530-2485. If you’re planning a new gate for a Pasadena property, the soil under the posts matters more than the gate itself. We’ll explain why below.
Key Takeaways:
- Full automatic gate installation in Pasadena typically runs $2,400 – $7,800, written and agreed before work begins.
- Pasadena’s expansive clay soil determines post footing depth and width more than any other local factor.
- A proper install includes groundworks, power run, safety edges, photo-eyes, and reversal testing, not just the gate panel.
- We install and service FAAC, BFT, Linear, and Viking operators, plus five other major brands.
Why Carver Gate Repair Is Pasadena’s Preferred Gate Installation Company
Carver Gate Repair is part of the Garrison Partners family and has operated to The Garrison Standard since 2008. Every Pasadena job gets a written price before any work starts, a written guarantee on every repair, and a free second visit if anything fails inside the guarantee window, no charge, no argument. Our technicians are background-checked and uniformed on every call, so the person who rings your bell in Altadena or San Gabriel is who we said they’d be. Lonnie Burke runs this operation, and he holds the crew to exactly what’s written on the quote.
Pasadena homeowners have already been burned by no-shows and moving prices. We built our process around the opposite: a live person answers the phone every hour of the day, the price is locked on paper before a tool comes out of the truck, and the work is guaranteed for a full year. That’s The Garrison Code in practice: show up squared away, explain what’s actually broken or needed, do the job once, clean up, and stand behind it.
Sliding Gate Installation in Pasadena
Sliding Gate Installation in Pasadena usually runs $2,800 – $6,500, with the final number set by gate width, operator brand, and how much ground prep the site needs. A slide gate is the right choice for driveways where a swing gate would arc into the street or the house, which happens a lot on the narrow lots in Pasadena’s older subdivisions. The gate rides on a V-track along the fence line, driven by a rack and pinion set that has to mesh cleanly or the whole thing grinds and stalls. On Pasadena clay, the track base and post footings are where the long-term reliability lives.
Footings and track prep
Gulf Coast clay expands when wet and shrinks when dry. That cycle moves posts. A standard footing set for inland soil will tilt inside a year on Pasadena ground, which is why we pour deeper, wider post holes with rebar and a bell at the base. The V-track gets a compacted base so it doesn’t sink in the wet season.
Rack, pinion, and operator mounting
We set the rack so the operator teeth drive the full travel without binding, then mount the motor on a pad that stays level when the ground shifts. The operator gets wired, programmed, and set through its travel limits before we hand it over.
Gate Opener Installation in Pasadena
Gate Opener Installation in Pasadena typically runs $900 – $2,400 when the gate structure is already sound and we’re adding or replacing the motor, arms, safety devices, and control board. That covers a new operator matched to the gate’s weight and travel, the wired or wireless safety edges, photo-eyes if required, and programming. Pasadena’s storm season is the usual driver behind opener calls: a power interruption knocks the limits out and the gate stalls mid-travel or ignores the safety edge until the board is re-taught.
Operator selection and travel limits
We match the operator to the gate, not the other way around. A heavy iron gate needs a different motor than a light aluminum one, and we set the travel limits once, correctly, so the operator isn’t fighting itself on every cycle.
Safety edges, photo-eyes, and reversal testing
Any automatic gate in a residential Pasadena driveway needs entrapment protection, which usually means a monitored safety edge on the leading edge, a photo-eye pair across the opening, or both. After everything is mounted and wired, we cycle the gate repeatedly through open, close, and reverse, and adjust until it reverses cleanly every time.
Trusted Brands We Service in Pasadena
Our technicians train on nine gate-motor brands, including FAAC, BFT, Linear, and Viking, so the operator on a Pasadena gate gets serviced by someone who knows its wiring and programming rather than learning on your dime. We keep common parts and control boards in local stock, which cuts the turnaround when a board fails or a limit switch wears out. If your existing operator is a brand we don’t list, call anyway. The odds are good we’ve worked on it.
Common Gate Installation Problems We See in Pasadena Homes
- Heaving clay moves gate posts. The wet-dry cycle in the Pasadena and Deer Park belt swells and shrinks the soil, tilting a standard-depth post and dragging the gate out of plumb within a season or two. Most “crooked gate” calls trace back to the footing, not the panel.
- Storm outages scramble operator limits. A power interruption during Gulf storm season trips the limit settings and resets safety photocell logic. The gate comes back reversed, stalled, or ignoring the safety edge until the control board is re-taught.
- Narrow driveways leave no room for error. Older Pasadena lots have tight clearances. A slide gate installed without the track base properly prepared ends up with rack and pinion teeth grinding and phantom loop-detector triggers.
- Undersized operators on heavy gates. A motor sized for a light aluminum panel will burn out early on a heavy iron gate. We match operator capacity to the actual gate weight, not the cheapest motor that fits the mount.
We installed a 16-ft slide gate and LiftMaster operator on a corner lot off Shaver Street, where the old swing gate had been dragging since the previous wet season. We pulled the hinge post, poured a new footing with rebar and a deeper bell, leveled a new V-track run, then set the rack and pinion so the operator teeth meshed cleanly. We added safety photocells and a safety edge, then cycled the gate repeatedly through open, close, and reverse before walking the homeowner through the keypad entry codes. The difference wasn’t the panel. It was the ground holding the post.
Pricing for Gate Installation in Pasadena, CA
Plan on $2,400 – $7,800 for a full automatic gate installation in Pasadena, depending on gate style, length, operator, and ground conditions. A pedestrian gate install runs $1,200 – $3,000. Gate opener installation alone, when the gate structure is sound, runs $900 – $2,400. A heavy double gate with two operators and intercom wiring lands at the top of the range. We quote every job in writing before work starts, and that number doesn’t move at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Pasadena
Our crews cover Pasadena and the surrounding cities, including San Marino, South Pasadena, Altadena, and San Gabriel. The same written pricing and full-year guarantee apply in every one of those service areas. If you’re just outside the city line, call (469) 530-2485 and we’ll confirm coverage.
Serving Pasadena, CA – Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pasadena
On Pasadena’s expansive clay belt, a gate post footing needs to go at least 36 inches deep and wider than the standard spec, often with a belled base and rebar reinforcement. The soil swells when wet and shrinks when dry, and a shallower post will heave out of plumb within a season or two. We size footings case by case based on gate weight, gate style, and the exact soil on the property, and we pour them deeper than code minimums because the ground here demands it. Call (469) 530-2485 to have a technician assess your site.
Yes. A new automatic gate on a Pasadena residential driveway needs entrapment protection, which means a monitored safety edge on the leading edge, a photo-eye pair across the opening, or both. We wire and test every safety device as part of the installation and cycle the gate through open, close, and reverse until it reverses cleanly every time. This isn’t an upsell; it’s part of a code-compliant, safe installation. Call (469) 530-2485 if you want to know what your gate config requires.
No, and we won’t promise that. Gate installation is measured, ordered, and scheduled; it involves footings, power runs, safety devices, and programming, and doing any of it hastily on Pasadena clay means a gate that fails in year two. What we do offer is a free measure, a written price, and a scheduled install date we actually keep. For a quicker view of your project and a locked quote, call (469) 530-2485.
We install and service FAAC, BFT, Linear, and Viking operators, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. The right operator is the one matched to your gate’s weight and travel, not the one we happen to have on the truck. We keep common parts and control boards for these brands in local stock around Pasadena, which shortens repair and replacement lead times. Call (469) 530-2485 and tell us what’s on your gate; we’ll tell you if it’s worth keeping.
In Pasadena, it’s almost always the post. The clay soil heaves with the wet-dry cycle, and a post set to a standard inland depth tilts inside a year, dragging the gate out of plumb regardless of how good the panel is. We inspect the post first, then the track and operator. If the footing failed, we pull the post, pour a deeper, wider base with rebar, and reset everything before adjusting the gate. Call (469) 530-2485 and we’ll set a time to look at it.
Ready to get a new gate installed in Pasadena? Call (469) 530-2485 for a free estimate. We’ll send a background-checked, uniformed technician, measure your driveway, check the soil, and hand you a written price before any work starts. The number won’t move at the door, and the work is guaranteed for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Pasadena and the surrounding area.