Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pico Rivera
Gate installation in Pico Rivera typically costs $1,800 – $4,600 for a standard sliding or swing gate with operator, and most jobs take one to three days once materials are on site. The price is written, agreed to, and signed before any concrete gets poured or any post gets set. If you’re calling from the Whittier Boulevard corridor, Mines Avenue, or the Rosemead Boulevard side of town, our crews know the streets, the block walls, and the gate failures that come with them. Call (469) 530-2485 for a free measure and a written quote.
We’re Carver Gate Repair, part of the Garrison Partners family and operating to The Garrison Standard since 2008. Lonnie Burke runs our gate work, and our technicians show up background-checked and in uniform. You’ll know who’s walking onto your property before they touch your gate.
Why Carver Gate Repair Is Pico Rivera’s Preferred Gate Installation Company
Pico Rivera homeowners don’t need a gate company that treats their property like one more stop on a route. They need a crew that understands what happens when a 400-pound gate hangs off a post set into a 1960s block wall. We see it regularly. The gate sags, the operator strains, and within a year the motor burns out or the rack strip pulls off. Post footing is not an afterthought here. It’s the difference between a gate that runs for fifteen years and one that needs a repair call every spring.
Our work in Pico Rivera is backed by the 365-Day Done Right Promise. That’s a written guarantee on every installation, good for a full year from the date we finish. If something we installed fails inside that window, we come back and fix it. No charge, no argument. That promise is in writing because a verbal promise isn’t worth much when a gate stops opening at 7 a.m.
Every quote we give in Pico Rivera is a written price delivered before any work starts. The number doesn’t move at the door. The price we agree on is the price you pay. Phones are answered by a live person 24 hours a day, seven days a week. Not a voicemail box. Not a call-back queue.
Sliding Gate Installation in Pico Rivera
Sliding Gate Installation in Pico Rivera is the most common gate type we build here, and there’s a reason. Many homes along the older tracts near Whittier Boulevard and Mines Avenue have short, sloped driveways. A swing gate needs clearance to arc outward or inward. On a sloped driveway, that arc either clips the car, grinds on the concrete, or forces the gate to be built shorter than the opening. A slide gate runs parallel to the fence line on a low-profile track, so it works on grades that would defeat a swing gate. In Pico Rivera, a slide gate installation typically runs $2,200 – $4,600 including the operator, track, safety edges, and concrete pad work.
Track and Groundwork Considerations
Pico Rivera’s older driveways often have settled concrete or asphalt that’s cracked along the edges. A slide gate doesn’t hang from the track; it rides on it. That means the concrete pad under the track has to be level and thick enough to carry the gate’s weight without cracking. We pour a reinforced pad sized to the gate panel, set the track in place, and shim it for a true line before the gate ever goes on. Cutting corners here is how you get a gate that binds halfway open.
When a Slide Gate Makes Sense
If your driveway slopes toward the street, or if your gate opening is wider than about ten feet, a slide gate is usually the right call. It’s also the better choice when a block wall runs right up to the driveway edge and there’s no room for a swing panel to arc. We’ll tell you honestly if a slide gate isn’t necessary. Sometimes a compact swing gate with proper post footings costs less and works just as well.
Gate Opener Installation in Pico Rivera
Gate Opener Installation in Pico Rivera usually costs $1,200 – $2,800 depending on the operator type and whether new conduit, wiring, or a loop detector is needed. The operator is the part that does the work every single day, and it’s the part that fails when it’s undersized or installed without the right entrapment protection. We install and service openers from Linear, Viking, Ghost Controls, and DoorKing, and we match the operator to the gate’s weight, length, and duty cycle rather than selling whatever is on the truck.
UL 325 Compliance and Safety Edges
Every automatic gate in Pico Rivera has to meet UL 325 entrapment protection standards. That means a monitored safety photocell or a contact edge that reverses the gate if it hits something, plus a loop detector for vehicle presence where appropriate. A gate operator without these isn’t just a code issue. It’s a liability on a property line shared with neighbors, kids on bikes, and delivery drivers. We test the reversal under load before we call the job done. That’s not an upsell. It’s the standard.
Power Runs and Loop Detectors
Most Pico Rivera homes don’t have a spare 120-volt circuit sitting at the gate post. Part of a proper opener installation is running conduit and low-voltage or line-voltage wiring from the house to the operator, buried to code. We also bury loop detector loops in the driveway where the install calls for them, so the gate opens automatically for an exiting car and holds open while the car is on the loop. A loop cost typically adds $400 – $800 to the job, and it’s the kind of thing that separates a gate that works from one that closes on a car.
Trusted Brands We Service in Pico Rivera
We work on nine major gate-motor brands, and in Pico Rivera we most commonly see Linear, Viking, and DoorKing openers on existing gates. Ghost Controls units are on the rise in newer installs. Because we’re brand-trained on all of them, we don’t have to swap in whatever operator we happen to stock. We match parts and programming to what’s already on your property. For Pico Rivera customers, that means faster turnaround when a board, limit switch, or receiver fails, because we’re not guessing at a generic replacement. Call (469) 530-2485 and tell us the brand on your operator. We’ll bring the right gear the first time.
Common Gate Installation Problems We See in Pico Rivera Homes
- Sagging gates on posts set into aging block walls. Many Pico Rivera homes built in the 1950s and 1960s have block walls that were never designed to hold a 300-pound swinging gate. The wall leans, the post cracks, and the gate drops within a year. The fix is an independent concrete footing, not a longer lag bolt.
- Sloped driveways forcing swing gates to scrape. Along the Whittier Boulevard corridor and the older tracts off Rosemead Boulevard, driveway grades are short and steep. A swing gate that clears level ground will drag on a slope. We size slide gates and low-ground-clearance swing panels for the actual grade, not a catalog spec.
- Openers installed without entrapment protection. We’ve been called to Pico Rivera jobs where an opener was wired in with no photocell, no edge sensor, and no loop detector. The gate works until it hits someone. Bringing those installs up to UL 325 is one of the most common repairs we do.
- Rack and pinion strips pulling off slide gate frames. On DIY and cheap installer jobs, the rack strip gets screwed into the gate frame without proper backing. Under load on a sloped track, it pulls loose. We install rack strips with through-bolts and backing plates so they stay put.
Pricing for Gate Installation in Pico Rivera, CA
Here’s what you can expect to pay in Pico Rivera for a complete gate installation, written down in plain numbers:
- Sliding gate with operator: $2,200 – $4,600
- Swing gate (single) with operator: $1,800 – $3,400
- Double swing gate (driveway) with operator: $3,200 – $5,800
- Gate opener installation only (existing gate): $1,200 – $2,800
- Loop detector (if buried loop needed): $400 – $800
- Post footing replacement (new concrete footing): $600 – $1,400
The final number depends on gate width, driveway grade, whether power already runs to the gate post, and whether the existing block wall can serve as a post anchor. What it doesn’t depend on is what the technician feels like charging that day. The quote is written before work starts, and the price is fixed. Call (469) 530-2485 for a free measure and a written estimate. No obligation.
We Also Serve Cities Near Pico Rivera
Our Gate Installation team covers Pico Rivera and the surrounding communities. If you’re in Montebello, Santa Fe Springs, Whittier, or Bell Gardens, the same crews, the same written pricing, and the same 365-Day Done Right Promise apply. Dispatch and scheduling are coordinated from the Los Angeles office, and crews serve Pico Rivera locally.
Serving Pico Rivera, CA – Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pico Rivera
Most gate installations in Pico Rivera take one to three days once materials and the operator are on site. A single slide gate with existing power nearby often finishes in two days. A double swing gate with new post footings and a fresh power run can run three. We don’t promise same-day installation because pouring concrete, setting posts, pulling wire, and testing the gate properly takes the time it takes. What we do promise is a schedule, kept. Call (469) 530-2485 and we’ll give you a realistic date range, in writing, before you commit.
Pico Rivera generally requires a building permit for new gate construction that includes footings and electrical work, and automatic gates must meet UL 325 entrapment protection standards regardless of permit status. We handle the installation to code and advise you on what the city requires, but we never start work on an unpermitted footing or electrical run. Most of the time the permit is straightforward, and we’ll tell you exactly what’s needed before the first shovel goes in the ground.
A proper gate installation includes independent post footings, a level track or properly set hinges, the gate operator sized to the panel weight, a safety photocell or contact edge per UL 325, conduit and power to the operator, and a loop detector where a driveway exit loop is part of the job. In Pico Rivera, where block walls often double as gate posts, the footing work is the piece that gets skipped by cheap installers and the piece that fails first. We don’t skip it. The written quote covers all of it.
No. Most sagging gates in Pico Rivera need a new post footing or a post replacement, not a new gate panel. We installed a LiftMaster slide gate operator on a rack and pinion system for a homeowner near Rosemead Boulevard and Mines Avenue whose gate was hanging off a hinge post set into a cracked block wall. Another company had quoted a full replacement. We poured a proper post footing, mounted a loop detector and safety photocell per UL 325, and the gate ran smooth. The panel was fine. Call (469) 530-2485 and we’ll assess the actual failure before recommending spend.
We install and service Linear, Viking, Ghost Controls, and DoorKing openers in Pico Rivera, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. That matters because Pico Rivera homes have a mix of older DoorKing and Linear units and newer Ghost Controls installs. We match parts and programming to the brand already on your gate, and we stock the common boards, limits, and receivers locally so turnaround is fast. Tell us the brand when you call (469) 530-2485 and we’ll come ready.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Pico Rivera with written pricing and the 365-Day Done Right Promise.