Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Redmond
A new driveway or pedestrian gate in Redmond typically runs $2,800 – $7,500 installed, depending on the gate type, operator, and how much ground work the site needs. A quality installation takes 2 – 5 days from site measure to final commissioning, not hours. That’s the honest answer, and it’s what we’ll tell you on the phone. Carver Gate Repair coordinates dispatch and scheduling from the brand’s Seattle office, and our crews serve Redmond properties directly. If you’re researching gate installation, call (469) 530-2485 and we’ll talk through what your specific site actually requires before you spend a dollar.
Why Carver Gate Repair Is Redmond’s Preferred Gate Installation Company
Redmond homeowners keep calling us for one reason: the number in the written quote matches the number on the final invoice. Every installation starts with a site visit, a written price, and a clear scope of work, so there’s no ambiguity about what’s included. Lonnie Burke runs our operation to that standard, and every tech on a Redmond job is background-checked and uniformed. You’ll know exactly who’s on your property before the gate ever opens.
The work itself is backed by a written guarantee, good for a full year. If something isn’t done right, we make it right. No charge, no argument. That’s the 365-Day Done Right Promise, and it applies to every installation we complete in Redmond.
We also answer the phone. A live person, 24 hours a day, seven days a week, including weekends and holidays. When a gate won’t open on a Redmond morning, you don’t want a voicemail box. You want a dispatcher who can tell you when a tech will arrive.
Gate Fabrication in Redmond
Gate fabrication in Redmond usually means building a steel or aluminum gate to fit a specific opening, rather than modifying a stock panel to “close enough.” We measure the actual rough opening, account for slope and setback, and fabricate the frame and pickets to match. Many Redmond homes have uneven driveway aprons or side-yard slopes where a standard gate panel would leave a gap at the bottom or bind on the hinge side.
A custom fabricated gate in Redmond generally runs $1,800 – $5,000 before the operator, depending on material gauge, size, and finish. The fabrication itself takes 3 – 10 business days in most cases. Installation adds 1 – 2 days on site.
Powder-Coated Steel Gates
Steel is the workhorse for Redmond’s wet winters. We fabricate with a minimum 14-gauge steel frame and powder-coat the finish before it ships, so the gate doesn’t rust at the welds after two seasons. Galvanized internal channels protect the horizontal rails, which is where moisture tends to sit on Redmond’s shaded lots.
Aluminum Gates for Wooded Lots
On properties that back onto greenbelts, aluminum holds up better where tree litter stays damp against the gate bottom. It won’t match steel’s rigidity pound-for-pound, but a well-braced aluminum gate handles Redmond’s bracket-fungus and moss buildup without the corrosion risk that bare steel would carry.
Automatic Gate Installation in Redmond
Automatic gate installation in Redmond pairs a fabricated or stock gate with a motor, safety devices, and an electrical circuit that can actually carry the load. The gate itself is the easy part. The part most installers skip is the ground work and power run. Our Gate Installation team starts every automatic project by checking for two things: whether the posts are set with enough concrete below the frost line for Redmond’s clay, and whether the driveway’s existing circuit is grounded and sized for an operator.
A complete automatic gate installation in Redmond, including operator, safety photocells, and fresh post footings where needed, typically runs $4,500 – $7,500. Operators from Linear, Viking, Ghost Controls, or DoorKing add $1,200 – $2,800 depending on duty cycle and access control needs.
Swing and Slide Operators
Swing operators work well on Redmond properties with flat or gently sloped driveways. Slide operators are the better call on sloped lots, where a swinging gate would have to fight grade through its full arc. We match the operator to the gate weight, width, and cycle count, never the other way around.
Safety Edges and Photocells
Every automatic gate in Redmond we install includes UL 325 compliant obstruction detection and a tested reversal function. That means photocells across the gate path and, on slide gates, a monitored safety edge. The risk isn’t theoretical; a gate that can’t detect a child or a car has no business operating automatically.
Trusted Brands We Service in Redmond
We install and service operators from Linear, Viking, Ghost Controls, and DoorKing, among others, and we carry common control boards, limit switches, and safety-edge components on our trucks serving Redmond. That means fewer multi-day waits for a part when an operator fails. If your existing gate has one of these brands and you’re adding automation or replacing a failed operator, we’ll match the new equipment to what’s already there, including the loop detector and access control wiring.
Common Gate Installation Problems We See in Redmond Homes
Before any new gate goes in, we check for the failure points that are specific to Redmond’s sites. Here’s what we walk the property looking for:
- Clay-soil post creep. Redmond’s clay-heavy soils expand and contract with seasonal moisture. Posts that were set shallow or without enough concrete drift out of plumb within a few seasons, and the gate starts dragging or racking against the operator.
- Greenbelt debris on safety devices. Properties that back onto wooded greenbelts see tree litter and pollen buildup on photocell lenses and loop detector housings. A healthy operator can still refuse to close, or reverse mid-cycle, because the safety devices read the debris as an obstruction.
- Undersized driveway circuits. Older Redmond homes often feed gate operators from a 15-amp circuit shared with landscape lighting or an outlet. A new operator tripping a breaker isn’t a motor problem. It’s a circuit problem, and it needs to be addressed during the installation, not after.
- Hinge-post movement on slide gates. We see slide gates binding halfway through travel on Redmond lots where the hinge post has moved, not because the rack is worn. The fix is resetting the footing and re-plumbing the gate frame, not swapping the motor.
Pricing for Gate Installation in Redmond, WA
Here’s what Redmond homeowners should expect to budget. A basic single swing gate with a manual closer runs $2,800 – $4,000. Adding an operator brings that to $4,500 – $6,500. A custom fabricated steel double driveway gate with automation, safety edges, and a fresh concrete footing commonly lands at $6,000 – $7,500. Pedestrian gates with keypad access are usually $3,200 – $5,000. The biggest cost drivers are post removal and re-footing, trenching for power from the panel, and the operator’s duty cycle. You’ll get a written price before any work starts, and that number doesn’t move at the door.
We Also Serve Cities Near Redmond
Our crews regularly work the Eastside, covering Gate Installation in Redmond plus nearby Kirkland, Sammamish, Bellevue, and Woodinville. If you’re just outside the Redmond city line, call (469) 530-2485 and we’ll confirm coverage and scheduling for your street.
Serving Redmond, WA – Our Local Coverage Area
We’re based in the Redmond area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Redmond
The operator is rarely the problem. In Redmond, the usual culprit is post footing movement from the area’s clay-heavy, seasonally saturated soil. When the hinge post creeps out of plumb, the gate binds against the operator rail or drags on the driveway, and no motor will fix that permanently. The repair is resetting the footing in concrete below frost depth and re-plumbing the gate frame. That’s the core of a lot of our Gate Repair – Redmond work. Call (469) 530-2485 and we’ll send a tech to assess the post movement, not just replace parts.
Plan for 2 – 5 days total, spread across site measure, fabrication or assembly, installation, and final safety testing. Slide gates on sloped Redmond lots tend to take a little longer because of the ground rail and runoff management. We never promise same-day installation. What we promise is a written schedule and a written price, agreed before the first day of work.
We install Linear, Viking, Ghost Controls, DoorKing, and several others, matched to the gate’s weight, width, and daily cycle count. If you already have a working operator and want to keep the same brand, we’ll spec the replacement around it. The right pairing matters more than the logo. Call (469) 530-2485 and we’ll tell you which operator fits your gate and your driveway.
Yes. Every automatic gate installation in Redmond we complete includes UL 325 compliant obstruction detection, which means photocells across the gate path and, on slide gates, a monitored safety edge. The system gets a full entrapment test and reversal verification before we call the job done. It’s not an upsell. It’s the minimum standard for a gate that moves under power.
Yes, and we do it regularly. We build steel and aluminum gates to your rough opening, driveway slope, and access needs, not the other way around. If your Redmond lot has an unusual setback, a sloped apron, or a specific architectural style, we’ll design the gate to fit the site and the house. Fabrication typically runs 3 – 10 business days, and you’ll get the build price in writing before fabrication begins. Call (469) 530-2485 for a free measure and a written quote.
Call Carver Gate Repair for Gate Installation in Redmond, WA
When you’re ready to move forward, call (469) 530-2485. You’ll speak to a live person, schedule a site measure, and get a written price before any work starts. Our Redmond crews show up uniformed, background-checked, and ready to do the job right the first time. If it isn’t right, the 365-Day Done Right Promise means we come back and make it right at no charge. That’s the standard, in writing, on every installation.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard for Redmond homeowners.