Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across San Francisco
We install driveway gates, pedestrian gates, and automatic gate systems throughout San Francisco, from the Sunset District to Noe Valley. A full gate installation here usually runs between $4,800 and $18,000 depending on the gate type, motor, and site work. The job involves more than hanging a gate: we set footings below grade, run power, install safety edges and photocells, and test entrapment reversal before we leave. This is not a one-day product swap in San Francisco. Permits, soil conditions, and steep driveways all shape the timeline. Call (469) 530-2485 for a free measure and written price.
We know San Francisco because we work it every week. Crews dispatch from our Bay Area office, and we schedule around the city’s permit counter, not in spite of it. That matters when you live on a sloped lot in Glen Park or a flat grid in the Richmond. The Gate Installation team handles everything from a simple pedestrian gate off the sidewalk to a double swing gate across a three-car apron.
Our technicians are background-checked and uniformed. They arrive with a written scope, a price that does not move at the door, and a clean-site rule that leaves your driveway the way we found it. Lonnie Burke runs the crew to the Garrison Standard: written prices, a 365-Day Done Right Promise on every repair, and a live person on the phone around the clock.
Why Carver Gate Repair Is San Francisco’s Preferred Gate Installation Company
Most San Francisco homeowners call us after another contractor no-shows, quotes a low number over the phone, or leaves a gate that sags six weeks later. We run a different operation. Every install starts with a site measure and a written price delivered before any work begins. The price we hand you is the price on the final invoice. No add-ons at the curb.
Our San Francisco customers consistently tell us the same three things when they call back or leave a review. First, the technician showed up inside the window we gave. Second, the gate swings or slides without binding, even on a 22% grade. Third, the site was cleaner when the crew left than when we arrived. We hold every tech to that, every job.
Parts matter in this city. Salt air off the Pacific eats cheap hinges and brackets. We stock galvanized and powder-coated hardware rated for coastal exposure, and we keep common operator parts for LiftMaster, Viking, Ghost Controls, and DoorKing on our trucks. That means a repair or adjustment call in San Francisco does not wait on a part shipping from a warehouse in Texas.
Lonnie Burke set the Garrison Code to force a specific standard on our own work. Every gate gets a limit switch check, a loop detector test where applicable, a safety-edge walkdown, and entrapment reversal verification. None of those are optional. If something is not right inside a year, we come back free under the 365-Day Done Right Promise.
Gate Installation Services in San Francisco
Gate Installation Services in San Francisco covers driveway gates, pedestrian gates, swing gates, sliding gates, double gates, and security gates, each built to the way your property actually sits. San Francisco is not flat. The Sunset and Richmond run on sand and clay. Noe Valley and Glen Park climb. Mission Bay sits on fill. Each one changes how we set a post, what we do for drainage, and whether a slide gate or a swing gate makes sense.
Driveway and Double Gate Installations
A driveway gate in San Francisco runs $5,500 to $15,000 on average, depending on width, material, and automation. Double gates, common on wider Sunset District driveways, add a second leaf and a center stop, which pushes the range closer to $9,000 to $18,000. We measure the curb cut and the slope before quoting, because those two numbers determine whether the gate clears at the halfway point.
Pedestrian and Security Gate Installations
A pedestrian gate off a San Francisco sidewalk runs $1,800 to $6,500 installed, more if you want a keypad or intercom tied to it. Security gates on an entry courtyard typically add steel tube framing and a maglock or electric strike, which climbs toward the higher end of that range. We set the post deep enough that the gate does not sag into the latch after one winter.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in San Francisco
Electric Gate Installation in San Francisco means the operator, the control board, the safety loop or photocells, and the power run all get done at once, not bolted on later. A single swing operator install starts around $3,200, and a full electric slide gate with keypad entry and a loop detector runs $7,000 to $16,000 depending on the existing panel and the distance to power. We run conduit, not extension cords. We test reversal under load, not just on the bench.
In Noe Valley we replaced a sagging 12-foot swing gate on a sloped 30th Street driveway. The hinge post had pulled out of a shallow pier. We set a new post footing below the old one, hung a LiftMaster operator, and added a safety photocell. The panel didn’t need replacing at all. On a separate Sunset District job we installed a slide gate on a flat driveway, cut a fresh post footing, and wired keypad entry and a loop detector so the gate would not close on a car waiting in the street.
Operator and Safety System Install
Every automatic gate we install in San Francisco gets entrapment protection. That means a photocell or contact edge on the leading side, reversal testing under load, and a manual release that actually works. Older properties sometimes have panels that can’t handle a modern swing operator, so we spec the motor to the existing service rather than selling you a new panel you don’t need.
Trusted Brands We Service in San Francisco
We train our San Francisco technicians on nine operator brands, including Viking, Ghost Controls, and DoorKing, and we offer Liftmaster repair in San Francisco. That matters because a San Francisco gate that survived twenty years of fog on an older FAAC or LiftMaster usually deserves a like-for-like replacement, not whatever a supply house happens to have on the shelf. We keep common boards, remotes, and limit switches for these brands in our Bay Area stock, so a scheduled repair in San Francisco rarely waits on freight. We match the operator to the gate weight, the cycle count, and the salt exposure on your street, not to whatever a distributor is pushing that quarter.
Common Gate Installation Problems We See in San Francisco Homes
- Settled hinge posts on sand and clay. The Sunset and Richmond sit on dune sand and bay clay that heaves with winter rain. A post set too shallow leans within one season, and the gate starts dragging. We set footings below the active soil line and, on steep lots, tie into a wider pier.
- Steep driveways that leave no room for a slide gate. Hillside lots in Noe Valley and Glen Park often have tight curb cuts and no side travel for a slide gate. That forces a swing gate whose geometry has to be measured within a quarter inch, or the gate binds halfway through its arc.
- Permit and neighborhood-notice delays from SF Planning. Because San Francisco’s permit counter and planning review treat driveway gates as structures subject to setback and neighborhood-notification rules, a gate installation here routinely waits on a Building Permit or Planning approval that can stretch weeks. That step is a same-week formality in most Bay Area suburbs. We file early and schedule the build around the approval date.
- Old brick or stucco curb walls that can’t hold a post. Many pre-war row houses in Pacific Heights and the Haight have shallow brick or stucco piers at the property line. Bolting a gate to a decorative pier is a guarantee of future failure. We dig a new structural post next to or behind the old wall and tie the gate into that instead.
Pricing for Gate Installation in San Francisco, CA
A pedestrian gate in San Francisco runs $1,800 to $6,500. A single swing driveway gate runs $5,500 to $12,000, and a double gate runs $9,000 to $18,000. Electric operation adds $3,200 to $7,500 depending on the operator, panel work, and the power run. Security gates with intercom or card entry land at the top of these ranges. What moves the number most is footing depth, driveway slope, and whether the city requires a fire access key switch or a specific setback. We give you a written price after the measure, before any work starts, and that number does not move at the curb. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near San Francisco
Our San Francisco crews also cover Daly City, Brisbane, Sausalito, and South San Francisco. If you’re just over the border in Daly City or down by the water in Sausalito, the same background-checked technicians and the same Gate Installation in San Francisco process apply: written price, permitted work, safety-tested operator install. Call the same number and a live person picks up.
Serving San Francisco, CA – Our Local Coverage Area
We’re based in the San Francisco area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in San Francisco
We can hang a pedestrian gate in a day. We cannot build a driveway gate in a day, and we will not pretend otherwise. A proper San Francisco driveway gate needs a post footing that cures before the gate hangs, a power run inspected where required, and safety edges and reversal testing done after the concrete has set. The city’s permit review also takes time. We quote a realistic schedule and keep to it. Call (469) 530-2485 and we’ll walk through the timeline for your specific street.
Most of the Sunset and Richmond sit on dune sand over bay clay. It drains well in summer and heaves in winter, which is why posts set at 18 inches lean within a year. Hillside neighborhoods have shallow fill over rock on some lots, which makes digging deeper expensive but necessary. We match the footing depth to your soil, not to a standard spec from a template.
Yes. Every automatic gate we install in San Francisco gets entrapment protection: a photocell or contact edge, manual release, and load-tested reversal. It is required by both code and common sense. A gate strong enough to move 400 pounds will hurt someone if it closes wrong, and we test that before we call the job done.
We can. Steep lots in Noe Valley, Bernal Heights, and Glen Park usually require a swing gate because there is no level travel for a slide. We measure the slope and the curb cut carefully, set the hinge post plumb and deep, and spec an operator rated for the full leaf weight. The gate has to clear the driveway crown at the halfway point, and we build for that.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Brand matters less than match: the operator has to be rated for the gate weight, the cycle count, and the salt air on your block. We stock common parts in the Bay Area so a repair or adjustment doesn’t wait on freight. Call (469) 530-2485 and we’ll spec the right unit for your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving San Francisco under the Garrison Standard since 2008.