Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Weatherford
A gate installation in Weatherford typically runs $2,800 – $6,500 for a standard double driveway gate with a motor, and $5,000 – $12,000 for a custom steel or wrought-iron design with full automation – including the post footings, hinges, gate operator, safety sensors, and the reversal test before we leave. Most jobs take two to four days from the first dig to final programming. We schedule by appointment, give you a written price before any work starts, and send a background-checked, uniformed technician to every Weatherford job. Call (469) 530-2485 to set up a free measure.
Why Carver Gate Repair Is Weatherford’s Preferred Gate Installation Company
We work on gates all over Weatherford, from the established streets north of I-20 to the acreage spreads west toward Peaster and the river-bottom properties south of town along the Brazos. Homeowners here tell us the same thing: they’ve dealt with contractors who quoted one number, showed up late, and left the job half-finished. Our process removes all of that. Every installation starts with a written quote, and that number does not move at the door.
Lonnie Burke, who runs Carver Gate Repair for the Garrison Partners family, has built the Weatherford operation around The Garrison Standard: written prices, background-checked techs, and a 365-Day Done Right Promise on every install. If something isn’t right within a year, we come back and fix it at no charge. No argument, no second invoice. That guarantee is in writing, on every job.
Scheduling runs through our Dallas-Fort Worth office, but the crews dispatched to Weatherford are local to Parker County and know the roads. Response time to most Weatherford addresses is within one business day for a measure and quote, and installations are scheduled within the week in most cases.
Electric Gate Installation in Weatherford
Electric Gate Installation in Weatherford means tying a new or existing gate into a motor system that opens and closes it automatically: a gate operator mounted to the post or pad, a power run or solar panel, safety photocells across the opening, edge sensors on the gate itself, and a keypad or remote entry. On the west side of Weatherford where soils run to expansive clay, we pay particular attention to where the operator mounts, because a post that shifts even a half-inch will bind the arm and burn up the motor.
Operators and Power Runs
We install swing operators, slide operators, and articulating arm operators, and we match the motor to the gate’s size and weight. A light pedestrian gate needs a different class of operator than a 16-foot steel driveway gate. The power run, whether it’s 120-volt from the house or a solar panel and battery bank, is part of the same job, not a separate bid.
Safety Sensors and UL 325
Every electric gate we install in Weatherford gets photocells and edge sensors, then we run the UL 325 reversal test before we call the job done. This is not optional. A gate operator without working entrapment protection is a liability, and we treat it that way.
Driveway Gate Installation in Weatherford
Driveway Gate Installation in Weatherford usually means a double swing or slide gate across the entry to a property, and it’s the most common job we do here. Homeowners on larger lots along FM 920, Tin Top Road, and the rural roads between Weatherford and Mineral Wells want a gate that keeps traffic out, holds up to wind, and doesn’t sag after the first wet season. Getting the footings right is the difference between a gate that stays level and one that drags.
Swing Gates vs. Slide Gates
A swing gate is less expensive to install and works well on flat driveways. A slide gate needs a longer run and more grading, but it’s the right call when the driveway slopes up from the road or when you don’t have room for the panels to swing inward. We’ll tell you which one makes sense for your specific lot and why.
Post Footings Sized to the Soil
Weatherford has two soil zones that behave very differently. The west side sits on expansive clay over caliche, which swells when wet and shrinks when dry. The Brazos bottom on the south and east side is sandy loam that drains fast and settles. This is why we size footings to the soil type, not to a generic chart. A shallow pour that works in one Weatherford neighborhood can heave or sink two streets over.
Trusted Brands We Service in Weatherford
Our Weatherford technicians are trained on nine gate-motor brands, and we stock parts locally for Viking, Ghost Controls, DoorKing, and Elite systems. That matters when you already have an operator on the gate and need it matched with the right control board, receiver, or limit switch. We don’t sell you a replacement brand because it’s what’s on the truck. We match the system you have and keep it running.
Common Gate Installation Problems We See in Weatherford Homes
- Shallow footings in west-side clay. Post holes dug to 24 inches heave within a season or two, throwing the gate out of level and stressing the operator. We dig deeper and use a wider base where the soil calls for it.
- Settling in Brazos-bottom sand. Sandy loam along the river lets posts settle unevenly after a heavy rain cycle. A gate that ran true at install starts dragging on the ground. Our footings for those lots go deeper than standard.
- Missing safety equipment on low-bid installs. A working gate motor without a loop detector or photocell fails the UL 325 entrapment standard. We see these on the regular, and we won’t leave one like that.
- Undersized gates on rural properties. On acreage spreads off FM 1885 and toward Peaster, a gate built for a light residential load gets beaten by wind and cain’t hold alignment. We size panels and operators for the actual exposure, not a suburban lot.
Pricing for Gate Installation in Weatherford, TX
A single swing gate with a basic motor runs $2,800 – $4,500 in Weatherford, depending on the footing work and power run. A double residential driveway gate with automation and safety sensors typically lands at $4,000 – $6,500. Custom steel gates, slide gates, or long runs in sandy or clay-heavy soil push higher, into the $7,000 – $12,000 range. You’ll get a written price before any work starts, and that’s the number you pay. No add-ons at the door. Call (469) 530-2485 for a free measure and a straight quote.
We Also Serve Cities Near Weatherford
Our crews run from Weatherford out to Aledo, Springtown, Azle, and Mineral Wells. If you’re on the edge of town or a little further out, the same written price and guarantee applies. For a full look at what we do, see our Gate Installation service page or the Gate Installation in Weatherford city guide.
Serving Weatherford, TX – Our Local Coverage Area
We’re based in the Weatherford area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Weatherford
We pour post footings to a minimum of 36 inches in Weatherford, and deeper on the west side where expansive clay heaves. In the sandy Brazos bottom, we go 36 – 42 inches with a wider base to resist settling. The depth decision gets made on-site, against the actual soil type, not a blanket number. Call (469) 530-2485 and we’ll come look at your lot and tell you what your footing needs before we quote.
The panel is rarely the problem. In Weatherford, sagging swing gates usually trace back to a post footing that’s too shallow for the clay or too narrow for the sandy soil, and the post moves just enough to drop the panel. Fixing the panel without re-setting the post in a proper footing means it’ll sag again. We’ll check the footing, the hinges, and the post lean in one visit and tell you what’s actually wrong. Get an exact diagnosis: call (469) 530-2485.
Yes. Every gate operator installation in Weatherford includes UL 325-compliant entrapment protection: a photocell across the opening and edge sensors, plus the reversal test run before we finish. We also install loop detectors where the driveway needs them for free-exit or obstruction detection. A gate that doesn’t pass the reversal test doesn’t leave our truck as a finished job. For a safety-checked install, call (469) 530-2485.
Yes, and we do it regularly on the acreage lots west of town and down along the Brazos where there’s no easy power run. We use a solar panel and deep-cycle battery bank matched to the operator’s draw and the gate’s cycle count. The full install includes the panel mount, charge controller, and battery enclosure, all wired to the same operator we’d use on a grid-tied gate. One of our recent jobs off FM 1885 was exactly that setup with a LiftMaster operator and a solar backup. Call (469) 530-2485 and we’ll tell you if solar is the better option for your property.
No. A proper gate installation in Weatherford takes two to four days on average. That’s the dig and pour, the post set time, the panel and operator mounting, the power run or solar setup, the safety sensor wiring, and the final test. Anybody promising same-day installation is skipping something, usually the footing cure time or the entrapment protection. We schedule the job properly and the price is agreed before we start. Call (469) 530-2485 to get on the schedule for a free measure.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Weatherford since the company’s founding.