Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Arlington
Gate motor repair in Arlington, TX typically runs $185 to $440 for common failures like limit switches, control boards, and capacitor replacements, while full operator swaps on heavy slide gates usually land between $700 and $1,600. Most repairs through our Arlington crew are completed in a single visit, and every job gets a written price before we touch a screw. That’s how The Garrison Standard works. If your gate is grinding, reversing, or simply not answering the remote, call (469) 530-2485 and a real person answers, day or night.
We work Arlington daily, from the fence-line subdivisions south of I-20 to the newer gated communities behind Lake Arlington and up toward the Grand Prairie line. Our technicians know which operators hold up in Texas summers and which ones get baked inside fully enclosed brick columns. That local knowledge saves Arlington homeowners the most expensive kind of gate repair: the second one.
Why Carver Gate Repair Is Arlington’s Preferred Gate Motor Repair Company
Homeowners across Arlington call us because we do exactly what we say we’ll do. The price we hand you before the work starts is the price on the invoice. Every repair carries a written 365-Day Done Right Promise. If it fails inside the guarantee window, we come back and make it right with no charge and no argument. That promise isn’t a sales line. It’s in writing on every ticket our Arlington techs hand out.
Our technicians are background-checked and uniformed. You know who’s coming through the gate before they ever reach your property. We don’t send subcontractors. We don’t dispatch a different crew than the one you spoke with. The person you call at (469) 530-2485 works for Carver Gate Repair, and the dispatcher coordinates scheduling from our Dallas-Fort Worth office so an Arlington crew can get to your address without playing phone tag.
Lonnie Burke runs our gate repair operation with a simple rule: if you wouldn’t leave it on your own gate, don’t leave it on a customer’s. That means torque settings get checked, safety edges get tested, and the job site gets swept before we leave. Written by Lonnie Burke, Owner at Carver Gate Repair, serving Arlington.
Gate Remote Control in Arlington
Gate Remote Control failure in Arlington is one of the most common calls we take from homeowners who find their keypad works but the remote won’t, or the remote only opens the gate from ten feet away. Sometimes it’s a transmitter issue. More often, the receiver board inside the operator has dropped its programmed codes after a power surge or a dead backup battery. We reprogram, re-sync, or replace the receiver and hand you tested remotes before we leave.
Programming and Range Problems
If your remote works from the driveway but not from the street, the receiver antenna may be pinched or buried inside a metal operator box. We relocate the antenna or upgrade the receiver so you’re not rolling your window down and holding the remote out like a toll tag scanner. Arlington homes with brick or stone columns around the operator often suffer precisely this problem because the enclosure blocks signal.
Remote Replacement
When the remote itself is dead, we match the frequency and brand. We stock remotes for LiftMaster, Viking, Ghost Controls, DoorKing, and Elite, plus compatible units for older FAAC and BFT boards. A replacement remote in Arlington typically runs $45 to $95 installed and programmed, depending on the brand and whether it’s a single-button visor unit or a multi-button keypad remote.
Gate Keypad in Arlington
Gate Keypad failure in Arlington shows up in two forms: the keys stop responding entirely, or the keypad works but the gate pauses halfway and reverses. The first is usually an electrical failure in the keypad’s board or a severed low-voltage wire underground. The second is almost never the keypad’s fault. It’s a misaligned safety photocell or a binding gate that trips the reversal circuit. We diagnose both before quoting a part.
Wired and Wireless Keypad Issues
Wired keypads buried in a post or brick column often fail where the low-voltage wire exits the conduit and gets hit by a weedeater or chewed by fire ants. Wireless keypads fail more quietly, generally from water intrusion after a heavy Arlington thunderstorm soaks the membrane. We seal new installations with marine-grade connectors and dielectric grease at every splice.
Keypad Replacement Cost
A new wired keypad installed in Arlington runs $185 to $300. A wireless keypad runs $160 to $260. The higher end covers units tied into intercom or access phone systems on gated communities. We test every keypad against the operator’s open, close, and stop commands before we call the job done.
Trusted Brands We Service in Arlington
Our Gate Motor Repair team carries parts for nine brands, and we service all of them in Arlington homes every week. Viking and Ghost Controls gear shows up heavily on newer slide gates in southwest Arlington. DoorKing and Elite operators are common on the apartment and HOA entry systems around Dalworthington Gardens and south Arlington’s commercial corridors. We stock boards, limit switches, receivers, remotes, and capacitors locally so we’re not putting your gate on hold while a part ships from California. You get the right part, matched to the system already installed, and a technician who actually knows that brand’s quirks.
Common Gate Motor Repair Problems We See in Arlington Homes
- Overheated control boards in enclosed columns. Arlington’s fully enclosed brick and stone gate columns trap summer heat like an oven. We regularly see control boards that read 140 degrees inside the enclosure at 3 p.m. in July. The fix is a vented door, a relocated board, or a heat-resistant board where the enclosure can’t be modified.
- Sagging hinge posts on older swing gates. Central Arlington neighborhoods built in the 1970s and 1980s often have heavy steel or iron swing gates hung on aging wood or undersized steel posts. The operator gets blamed for working hard, but the real problem is a post that has shifted. We set new footings before replacing the operator, or the new one fails inside a year.
- Surge damage after thunderstorms. Arlington sits in a lightning corridor. Power surges along overhead lines trip loop detectors and knock out safety photocells. The gate ends up stuck open or reverses erratically. We add surge suppressors on the low-voltage side and test the entire safety circuit after a storm-damage call.
- Worn rack and pinion on slide gates. South Arlington slide gates, especially the heavier steel ones, chew through rack sections over time. The motor runs fine but the gate binds and trips its internal overload. Replacing the operator without addressing the rack is throwing money away.
One recent job off Pleasant Ridge Road in south Arlington sums up the pattern. A LiftMaster slide operator had been binding and tripping its overload on hot afternoons. The rack and pinion were worn, and the concrete post footing had shifted just enough to misalign the rail. We reset the operator, replaced the worn rack section, and re-leveled the footing so the gate rolled clean. If we’d only swapped the operator, that homeowner would have been calling us again inside six months.
Pricing for Gate Motor Repair in Arlington, TX
Gate motor repair in Arlington breaks into three realistic tiers. A control board replacement typically runs $250 to $550. A limit switch or capacitor repair runs $185 to $340. A full operator replacement, including the new motor and rail hardware, runs $700 to $1,600 for slide gates and $800 to $1,900 for swing gates depending on gate length and weight.
What moves the price in Arlington? Gate size, access, and whether the operator is a residential or light-commercial unit. An 18-foot wrought-iron drive gate over a concrete driveway in Dalworthington Gardens takes longer and costs more than a 10-foot chain-link gate over grass. We give you the written price before any work starts, and that number doesn’t move at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Arlington
Carver Gate Repair serves Gate Motor Repair in Arlington and the surrounding communities daily. Our crews take calls in Mansfield, Kennedale, Burleson, and Cedar Hill with the same written-price policy and the same one-year guarantee. If you’re on the edge of Arlington or just outside city limits, call us at (469) 530-2485 and we’ll let you know which crew can reach you first.
Serving Arlington, TX – Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Arlington
Not necessarily. When the motor spins but the gate crawls or stalls, the problem is usually mechanical: a worn rack section, a sagging hinge post, or a bound roller. We diagnose the mechanical travel first, then the operator. Replacing the motor on a gate that’s binding mechanically is like putting a new engine in a car with seized brakes. Call (469) 530-2485 and we’ll check the whole travel, not just the motor.
Intermittent remote or keypad function in Arlington usually traces to one of three things: a weak receiver board in the operator, water or ant damage inside the keypad housing, or a misaligned safety photocell that interrupts the close command. Power surges after thunderstorms are a frequent trigger. We test each component in sequence and replace only what’s actually failed.
Yes. Safety photocells are not optional equipment. They stop the gate from closing on a car, a child, or a delivery person. Arlington code enforcing agencies and every gate operator manufacturer require them, and our techs test the reversal circuit on every job. If your photocells are old, misaligned, or bypassed by a previous handyman, we’ll flag it and quote the correction.
Most common repairs, like limit switches, capacitors, and receiver boards, take 60 to 90 minutes on site. Full operator replacements take three to five hours depending on gate weight and access. We schedule a specific arrival window, not an all-day “sometime between 8 and 5.” Get a time window and a written price before work starts by calling (469) 530-2485.
Yes. We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Our technicians are trained on each platform’s error codes and wiring, so we’re not learning your system at your expense. The right part gets matched to the system already installed, and the repair carries our full-year written guarantee.