Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Converse
A gate motor repair in Converse typically runs between $225 and $480 for common operator failures, and most jobs are diagnosed and repaired in a single visit. If the motor itself is beyond saving, a full operator replacement in Converse usually lands between $850 and $1,800 depending on the gate’s length, weight, and whether the existing wiring can be reused. We’re Carver Gate Repair, and we give you a written price before any work starts, not after we open the panel and find more problems.
Call (469) 530-2485 and you’ll reach a live person, day or night. Our technicians know Converse streets well, from the older ranch-style homes around the city center to the newer subdivisions off FM 1516 and Schaefer Road. When your swing gate stops mid-cycle or your keypad goes dead after a thunderstorm, you need someone who can diagnose the real problem fast and tell you straight what it costs to fix.
Key takeaways:
- Gate motor repair in Converse typically runs $225 – $480; full operator replacement is $850 – $1,800.
- Written price before work starts, every time.
- 365-Day Done Right Promise in writing on every repair.
- Live-person phone coverage 24/7, including weekends and holidays.
- Technicians trained on LiftMaster, Linear, Viking, Ghost Controls, DoorKing, and eight other major operators.
Why Carver Gate Repair Is Converse’s Preferred Gate Motor Repair Company
Homeowners in Converse tend to know what they don’t want: a technician who shows up two hours late, charges a trip fee to say “it’s probably the board,” swaps a part on a guess, and disappears. That’s what built our reputation here. Carver Gate Repair works to The Garrison Standard, which means three things on every job: a background-checked, uniformed technician, a written price handed over before any work begins, and a written guarantee on the repair itself, good for a full year from the date of service.
Part of the Garrison Partners family, operating to The Garrison Standard since 2008, we answer our own phones around the clock. When someone from Converse calls at 6:45 in the morning because their gate wouldn’t open and they’re late for work, a person picks up. Not a recording. That matters in this trade more than any marketing line.
We’ve worked on gates in neighborhoods across Converse, from homes along Kitty Hawk Road and Loop 1604 to the quieter streets near Converse North Park. The same technician culture applies whether we’re twenty minutes away or right around the corner: clean boots in the house, the work area left as we found it, and a list of what we did in plain English.
Gate Operator Keypad in Converse
A gate operator keypad in Converse is one of the most common trouble calls we get, because our weather is hard on keypads. Intense summer heat breaks down the keypad’s membrane buttons, and the periodic heavy rains that roll through Bexar County can get moisture into the casing and corrode the internal contacts. When a keypad stops recognizing the code or the buttons become unresponsive, the gate behaves like the operator is dead, even when the motor itself is fine.
Keypad replacement in Converse usually lands between $145 and $320, including the new keypad and the reprogramming for up to four access codes. If the keypad wiring got hit by a power surge or is simply old and degraded, rewiring might add $80 to $150 to the job. We test every button after installation and make sure the keypad syncs with the gate’s control board before we consider the job done.
Storm-Damaged Keypad Repair
Thunderstorms in Bexar County bring frequent power surges. A keypad that worked fine yesterday and won’t light up this morning often has a blown fuse on the operator board or a burned trace from a surge. We check the keypad first, then the board, and we tell you which one it was before we replace anything.
Keypad Replacement and Reprogramming
If the old keypad is past saving, we install a weather-rated replacement and walk you through setting your own codes. We’ll also show you how to add a visitor code and delete one, so you’re not calling us back for something you can handle yourself.
Gate Operator Repair in Converse
Gate operator repair in Converse goes beyond swapping out a motor. The operators we see fail most often here are not dying of old age. They’re being worked too hard by a gate that has shifted on its post footing, which stiffens the travel and forces the motor to strain every single cycle. A typical operator repair in Converse runs $225 to $480, but if the underlying mechanical issue isn’t addressed, that repair won’t hold. We fix both.
Our technicians begin every operator repair the same way: check the gate’s movement with the operator disengaged, then inspect the post footings, hinge bearings, and rack alignment before touching the electronics. This is what keeps a repaired operator from failing again in three months. After the mechanical side is sound, we move to the board, limit switches, and wiring, and we replace only what’s actually failed.
We recently serviced a LiftMaster gate operator at a home near Converse City Park, where the swing gate had started stopping mid-travel. Our tech found a worn hinge post footing that had shifted, causing the operator arm to bind; we performed post footing correction and sag correction, then reset the limit switches and tested the safety photocell for proper entrapment protection. The gate now cycles smoothly, and the homeowner has a clear checklist for future battery and backup checks.
Limit Switch and Travel Programming
When a gate stops past its usual closed position, reverses before fully opening, or slams at the end of travel, the limit switches are often at fault. These small switches tell the operator exactly where to stop. We re-set and reprogram them to the physical travel of your specific gate, then test the cycle several times to confirm consistency.
Control Board Diagnosis
Power surges from storms common in Bexar County are a major killer of gate operator control boards. We carry board-level test equipment and can often identify the single failed component. If a board replacement is necessary, we’ll show you the failed board and give you a replacement price before we order or install anything.
Trusted Brands We Service in Converse
Our technicians work on nine gate-motor brands, including Linear, Viking, and Ghost Controls, so the odds are strong we know the system already installed at your Converse home. We keep a rolling stock of common operator parts in the service van, which means small jobs often get finished the same day we diagnose them. DoorKing and other commercial-grade brands are in our rotation too, for the larger driveways and gated entries you find off Toepperwein Road and the surrounding area. The right parts and the right training matter more than a brand sticker.
Common Gate Motor Repair Problems We See in Converse Homes
Because Converse sits on the eastern edge of the Edwards Aquifer recharge zone with rocky, shallow soils and high shrink-swell clay in the surrounding Blackland Prairie, many residential swing and slide gates here are built on isolated post footings that shift seasonally, which is why so many gate operator repairs in Converse trace back to intermittent rack and pinion binding or sagging gate frames rather than electronics. Here’s what that looks like in practice:
- Post footing shift and gate sag: The seasonal swelling and shrinking of the clay soil moves gate footings, and once the gate sits lower than the operator expects, every cycle strains the motor and gearbox. We correct the sag and re-secure the footing before the operator takes further damage.
- Corroded control boards and photocell lenses from heat and rain: Converse summers bake the inside of an operator housing, then hard rains introduce humidity. Lenses get pitted and cloudy; boards develop connection failures. This looks like intermittent operation, not a hard failure, which is why it confuses homeowners.
- Surge-damaged keypads and loop detectors: Bexar County thunderstorms produce frequent power surges that blow fuses, fry keypad wiring, or kill the loop detector that tells the gate when a car is waiting. A gate that won’t open for a car but opens fine with a remote often has a failed loop detector.
- Stripped gears and worn hinges from a misaligned track: Slide gates on a shifting footing drag their chain or rack, and the resulting resistance wears the operator’s gears out years early. Replacing the gear without fixing the track and alignment is money wasted.
Pricing for Gate Motor Repair in Converse, TX
Our repair pricing in Converse is based on two things: what has actually failed and whether the gate’s mechanical alignment is the underlying cause. A keypad replacement runs $145 – $320. A limit switch adjustment or replacement runs $120 – $260. A control board replacement can run $300 – $650 depending on brand and model. A full operator replacement, including the motor arm or slide operator, runs $850 – $1,800 for typical single-family gates in Converse. The more common job, a repair that includes fixing a shifted footing and realigning the gate, runs $225 – $480.
Every one of those numbers is delivered as a written price before we begin work. The number does not change at the door. If the repair fails within the guarantee window, the second visit is free. Call (469) 530-2485 for a free estimate, and we’ll give you numbers you can use, not a vague promise.
We Also Serve Cities Near Converse
Our Gate Motor Repair service covers Converse plus the surrounding communities. We work regularly in Universal City, Schertz, Cibolo, and San Antonio, with crews coordinated from the brand’s San Antonio office and dispatched to Converse locally. If you live just outside Converse and need a gate motor looked at, the same written price and 365-day guarantee apply.
Our Gate Motor Repair in Converse page keeps all the local details here, but our coverage radius matches how Converse residents actually live, work, and drive.
Serving Converse, TX – Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Converse
An intermittently stopping gate in Converse is usually a mechanical bind from a shifted post footing, not an electronic failure. The motor senses increased resistance and shuts off to protect itself, then works again after the gate settles into a slightly different position. We check the footing, hinge alignment, and track first, then move to the limit switches and board. If you tell us exactly when the gate stops, we can usually narrow the cause before we even arrive. Call (469) 530-2485 for a diagnostic visit.
Most common repairs such as limit switches, keypads, small board issues, and rack alignment can be completed in 60 to 90 minutes by one of our technicians. Repairs that require post footing correction or a full operator replacement may take half a day or more, depending on the gate’s footing condition and the part availability for your specific operator. We’ll give you a time estimate on the phone when you describe the symptom, and we’ll keep it honest.
Yes. We service solar gate openers, including Ghost Controls and other brands common on driveways in Converse where running line voltage to the gate isn’t practical. Solar systems here take extra strain from Bexar County heat and storm cycles, so we check the panel output, battery health, and charge controller as part of any solar opener repair. Call (469) 530-2485 and tell us your gate is solar-powered; we’ll bring the right test gear.
First, visually check the keypad’s screen or LED and look for any visible moisture behind the keypad cover. Then check your gate’s main breaker or GFCI to confirm power is reaching the operator. If the gate still works with the remote but not the keypad, the problem is likely a blown fuse on the operator board or damaged keypad wiring from a power surge. Don’t open the operator panel if you’re not comfortable with line voltage; call us and we’ll handle the entire diagnosis and repair. Call (469) 530-2485 and we’ll get a technician out to your Converse home.
Any automatic gate in Converse should have entrapment protection in place, typically a set of safety photocells across the gate opening and a properly adjusted obstruction-sensing function in the operator. A safety edge is also common on slide gates. We test the reversal force, the photocell beam, and the operator’s obstruction response on every repair, and we document the results. If we install a new gate operator, we verify all safety devices are present and functioning before we leave the job.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Converse and the surrounding Bexar County area to The Garrison Standard.
Contact Carver Gate Repair in Converse
If you need a gate motor diagnosed or repaired in Converse, call (469) 530-2485 for a free estimate and a written price before any work starts. We answer live around the clock, and we’ll schedule a background-checked, uniformed technician to come out and tell you straight what’s wrong and what it costs to fix, with the work guaranteed in writing for a full year.