Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Delray Beach
Gate motor repair in Delray Beach usually costs between $185 and $460 depending on whether we’re replacing a control board, a limit switch, or the operator itself, and most repairs are done in one visit. If your gate stopped opening, grinds without moving, or only works from one remote, call (469) 530-2485 and you’ll reach a live person who can schedule a Delray Beach tech the same day. We work on swing gates, slide gates, and barrier arms from the Intracoastal barrier island west through 33444, 33483, and 33445. The salt air in this city changes what fails first and how we fix it, and that’s exactly what this page walks through.
Our crews know Delray Beach streets. A corroded limit switch on a gate off Linton Boulevard behaves differently than one on a canal-front property off Spanish River Drive. We show up with the right parts for the system you already have, not a truck full of guesses. Call (469) 530-2485 and tell us what your gate is doing. We’ll give you a straight answer before we ever pull up.
Key Takeaways:
- Gate motor repair in Delray Beach typically runs $185 – $460, with control boards at the low end and full operators at the high end.
- Coastal properties east of the Intracoastal need marine-grade hardware and stainless fasteners, or repairs come back every couple of years.
- Every repair includes a written price before work starts and a 365-day written guarantee.
- Phones are answered live, 24/7, including nights and weekends. That means a real person, not a queue.
Why Carver Gate Repair Is Delray Beach’s Preferred Gate Motor Repair Company
Homeowners along Atlantic Avenue, in Lake Ida, and through the communities around Morikami Park call us because we show up when we say we will and the price we quote is the price on the invoice. That’s The Garrison Standard, the operating code our Gate Motor Repair team has followed since 2008. It’s not a slogan on a brochure. It’s a written price before the first tool comes off the truck and a written guarantee on every repair, good for a full year.
Lonnie Burke runs the operation here, and the discipline shows. Background-checked, uniformed technicians on every call. A free second visit if a repair fails inside the guarantee window. No charge, no argument. When a Delray Beach customer calls about a gate that stopped mid-cycle on a Friday evening, they don’t get a voicemail. They get a person who knows where the nearest stocked van is and can dispatch it.
Delray Beach has its own rhythm. Snowbirds leaving gates idle for months. Summer squalls blowing salt spray over oceanfront operators. Communities from Briny Breezes up to Northridge Lakes with homeowner association gates that can’t be down for three days. We keep parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule so we’re not ordering a board from a warehouse when your gate is stuck open.
Gate Remote Control in Delray Beach
Gate Remote Control in Delray Beach is one of the most common calls we run, because remotes stop pairing, get lost, or simply wear out, and most replacements are done in under an hour for $45 to $120 per remote. If your gate opens from the keypad but not the remote, or if the remote works only when you’re six inches from the receiver, the fix is usually a frequency match, a receiver issue, or a dead battery that has already been swapped twice. We carry handhelds and keychain transmitters that pair with the operator already mounted on your gate, not universal remotes that only half work.
Coastal Range and Signal Problems
On beachside streets in Delray Beach, remotes often work fine inside the driveway but fail when you’re pulling up from A1A because the receiver is tucked inside a metal operator housing that has been corroded by salt air. We clean or replace the antenna, relocate the receiver where it gets line of sight, and make sure the board terminals aren’t green with bloom. That’s a repair that usually lands between $95 and $150.
Remote Programming and Adding Devices
If you add a second car or a renter to the property, we program new remotes on the spot and delete the old ones you can’t account for. Removing lost remotes matters on a Delray Beach property because an unpaired transmitter that still works the gate is a security hole, not a convenience. The job is quick, and the price is in writing before we start.
Gate Keypad in Delray Beach
Gate Keypad in Delray Beach starts around $120 installed and runs up to $240 for weatherproof, backlit models that survive the salt and afternoon thunderstorms without eating keypad membrane contacts. A keypad lets delivery drivers, landscapers, and dog walkers get in without a remote, and it is one of the first things to fail on coastal properties because salt moisture crawls into the ribbon cable and button matrix. When codes stop working or only work intermittently, the fix is usually a new keypad wired to the operator input, not a new gate motor.
Keypad Reliability Near the Water
Within a few blocks of the ocean in Delray Beach, we recommend a sealed keypad with stainless hardware instead of the lighter plastic units sold at hardware stores. The cheaper keypads last a year or two at most. A sealed unit with dielectric grease on the terminals runs $165 to $240 installed and outlasts the alternative three to one.
Replacing a Worn Keypad Before It Locks You Out
If your keypad beeps but doesn’t trip the gate, or if you have to press the code twice, the contact membrane is failing and it will only get worse. We can usually pull the existing wiring and mount a new keypad in the same location, so the job stays clean and fast. The price is agreed before any work starts, and the repair carries the same full-year written guarantee as everything else we do.
Trusted Brands We Service in Delray Beach
We stock and service Gate Motor Repair parts for Viking, Ghost Controls, DoorKing, and Elite systems across Delray Beach, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. Having the right board or arm on the van means a repair that would take a week if ordered from a distributor can be done same trip. If you’re not sure what operator is mounted on your gate, read the model off the housing or the circuit board and tell us over the phone. We’ll tell you if it’s a system we already carry parts for. In most Delray Beach cases, it is.
Common Gate Motor Repair Problems We See in Delray Beach Homes
- Salt air corrodes operator control boards and terminal strips. Properties east of the Intracoastal or within walking distance of the beach get white corrosion bloom on board connectors. It causes intermittent faults, dead keypads, and boards that fail every two or three years instead of every ten.
- Painted steel swing gate frames rust from the inside out. The hinge post base rust-jacks and shifts, which throws the gate out of alignment and makes the operator strain until the motor burns out. On coastal Delray Beach gates, we replace standard hinges with stainless and spec hot-dip galvanized steel when a new frame is needed.
- Solar gate opener panels and loop detector wiring suffer ground faults. Salt-laden humidity after summer squalls gets into connectors not sealed with dielectric grease, and the gate starts false-triggering or not responding to vehicles. This is a Delray Beach pattern, not a brand defect.
- Intermittent operation from a gate remote that works five times then quits. The receiver is usually fine but the terminal strip inside the operator has gone green. Cleaning and re-seating the connections is a common service call in the 33444 and 33483 ZIP codes, and it is one of the fastest fixes we do.
Pricing for Gate Motor Repair in Delray Beach, FL
Expect a gate motor repair in Delray Beach to run $185 to $460 depending on the part and the operator. A replacement limit switch runs $85 to $160. A control board swap, which is the most common coastal repair, runs $185 to $340. A full operator replacement on a dual swing gate can reach $900 to $1,800 when the operator and arms both need to go. Every job starts with a written price before any work begins, so the number doesn’t move once the housing is open. Call (469) 530-2485 for a free estimate. That’s a real estimate, given by a person, with no charge to come look at the gate.
We Also Serve Cities Near Delray Beach
If you’re just outside Delray Beach, we run calls down into Delray Beach proper and also serve Boynton Beach, Boca Raton, Deerfield Beach, and Greenacres. Same crews, same The Garrison Standard, same written price before any work starts. If your gate is down and you’re anywhere in the coastal corridor, the number is the same: (469) 530-2485.
Serving Delray Beach, FL – Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Delray Beach
Because salt aerosol from the ocean settles on the board and terminal strips, especially east of the Intracoastal, and that corrosion causes shorts and intermittent faults that kill the board early. The fix is a replacement board with all connections cleaned and sealed with dielectric grease, and in many coastal Delray Beach homes, relocating or shielding the board housing. After the repair, your board gets the same full-year written guarantee as any other job. Call (469) 530-2485 and we’ll inspect the board and tell you exactly what it needs.
Marine-grade aluminum or hot-dip galvanized steel for frames and posts, with stainless steel fasteners and hinges. Standard painted steel that works fine a mile inland off Linton Boulevard will corrode from the inside out within a few blocks of the ocean, and hinge posts will rust-jack and shift. When we replace hardware on a beachside Delray Beach gate, we spec materials made for exactly that exposure. It costs more up front and lasts years longer.
The hinge post has likely rust-jacked or the hinges have worn, and the gate is now dragging or binding, which overloads the operator motor. The fix is replacing the hinges, correcting the post alignment, and letting the motor work without fighting the weight of the gate. In Delray Beach, we do this with stainless hinge hardware on coastal properties so the same problem doesn’t return in two years. One correction visit usually runs $200 to $450 depending on the gate size.
Yes, if you replace cheap hardware-grade remotes and keypads with sealed, weatherproof units rated for salt humidity. A quality keypad swap in Delray Beach runs $120 to $240, and remotes run $45 to $120 each. For beachside properties, the sealed keypad and stainless hardware are not an upsell. They are the difference between replacing the keypad every other year and replacing it every six or seven. Call (469) 530-2485 for an exact quote. Estimates are free.
Yes, and if your gate has a photocell, it has to be verified working. A failed or misaligned safety photocell can let the gate close on a vehicle or a person, and that’s a liability and a safety problem we will not leave unresolved. On coastal Delray Beach properties, photocell lenses also collect salt film, so they need cleaning and alignment more often than inland. We include photocell verification as part of any gate motor repair call that includes obstruction sensor equipment.
Call Carver Gate Repair in Delray Beach
If your gate motor is down, intermittent, or grinding in Delray Beach, call (469) 530-2485. A live person answers, 24/7, and can schedule a Delray Beach technician with the right parts and a written price before any work begins. Every repair carries the 365-day written guarantee and a free second visit if anything fails inside that window. Lonnie Burke and the Carver Gate Repair crew work to The Garrison Standard on every gate, every time. Call now and get a straight answer.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Delray Beach, FL.