Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Everett
When a gate motor fails in Everett, the gate usually stops working at the worst possible moment – on the way to Boeing’s morning shift, or right as a storm front rolls in off Puget Sound. We fix that fast. Our Gate Motor Repair team knows the operators used across Snohomish County and carries common parts for LiftMaster, FAAC, BFT, and Linear units on the truck. Call (469) 530-2485 and a real person answers. That part matters when your driveway gate is stuck open and the rain is coming down Everett style.
We work across Everett, from the older streets near Mukilteo Boulevard down to the newer builds off 128th Street SE. Response time to most Everett neighborhoods runs 60 to 90 minutes for a repair call, and we give you a written price before we touch a single screw.
Key Takeaways
- Written price before any work starts – the number doesn’t move at the door
- A full written guarantee on every repair, good for 365 days
- Background-checked, uniformed technicians on every Everett call
- Technicians trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule
Why Carver Gate Repair Is Everett’s Preferred Gate Motor Repair Company
Everett homeowners call us because we show up when we say we will and put the price in writing before we open the control box. That’s the Garrison Standard, and every Carver Gate Repair location is bound to it. No estimates that grow once the job is open. No tech who can’t tell you what’s wrong. Lonnie Burke leads the operation, and he holds the crew to a simple rule: if it’s not done right, we make it right – free, for a full year.
Our phone line is staffed by a live person 24 hours a day, every day of the year. Holidays included. If your gate motor quits at 7 a.m. on a Tuesday and you need to get to work in Everett, you’ll reach a human, not a voicemail box. We dispatch to all of Everett – from the Valley View Neighborhood Association area near Silver Lake to the industrial corridor along the Snohomish River to the residential streets near Forest Park. Local knowledge matters because Everett’s housing stock isn’t uniform. A gate operator on a 1960s rancher near Lions Park has different failure modes than one on a 2018 build in the Silver Firs area. We know what to look for in each.
Gate Motor in Everett
Gate motor work in Everett means repairing or replacing the operator that actually swings or slides your driveway gate. The motor is the muscle of the system, and when it fails, it’s usually not the motor itself – it’s the load it’s fighting. We replace swing arm operators, slide operators, and the full drive assembly on gates from Marysville to Mukilteo, with a heavy concentration of calls in neighborhoods along Broadway, Casino Road, and 19th Avenue SE. A typical gate motor replacement in Everett runs $850 to $2,400 depending on the operator type and whether the existing mounting plate and power run can be reused.
Swing Arm Operator Replacement
Older Everett properties, especially in the Mukilteo-Speedway area, often run on swing arm operators that have been in service for 15 or 20 years. When the arm fails, the gate hangs mid-swing or refuses to move at all. A replacement articulating arm operator with new mounting hardware and a proper travel and force adjustment runs roughly $900 to $1,800, and we test the full reversal cycle before we hand it back.
Slide Operator Replacement
Newer homes and commercial properties off 128th Street SE and near the Snohomish County line favor slide gates, and those operators take a beating from gravel, wet leaves, and the salt-saturated air off the Sound. A full slide operator replacement in Everett typically lands between $1,200 and $2,400, including rack alignment and limit switch setup. We quote the full number up front, in writing, before anything gets ordered.
Gate Remote Control in Everett
Gate remote control issues in Everett account for a big share of our service calls, and they split into two camps: the remote itself died, or the receiver inside the control board has quit listening. We replace lost or dead remotes, program new ones to your existing system, and rebuild receiver boards when the failure is on the operator side. A replacement remote for a LiftMaster or Mighty Mule system in Everett typically runs $45 to $95, and we program it on-site in under 15 minutes. Receiver board repair or replacement runs $180 to $420.
Remote Programming and Pairing
If you’ve moved into a home in the Silver Lake area and the previous owner took the gate remotes, we can pair new ones to the existing operator. We bring remotes for LiftMaster, FAAC, BFT, and Linear systems on the truck, so there’s no week-long wait for parts. The programming takes minutes; making sure the range works from your car on the downhill slope off Hardeson Road is the part that takes patience.
Receiver and Antenna Issues
Everett’s moisture is tough on receiver boards. Older control boxes mounted on weather-exposed posts near the water develop corrosion on the receiver terminals, and the remote works fine – the board just isn’t hearing it. We clean, test, and when needed replace the receiver assembly, then re-tune the antenna so the range holds from the bottom of the driveway.
Trusted Brands We Service in Everett
We service gate motors from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Nine brands, one standard. The important part for Everett customers isn’t the brand list – it’s that we know the failure patterns on each. A FAAC swing operator near Forest Park has different weak spots than a Viking slide operator out by the Boeing plant. We stock common motors, control boards, remotes, and limit switches for the brands we see most often in Snohomish County, so a lot of repairs are completed in a single visit.
Common Gate Motor Repair Problems We See in Everett Homes
- Hinge post shift in weather-soaked footings. Everett’s rainy winters and heavy clay soil work on post footings year after year. On the Mukilteo Speedway side of town, we regularly pull back old hinge posts that have leaned half an inch and thrown the gate out of plumb, binding the operator arm until the overload trips. The motor looks bad. It isn’t. The footing is.
- Undersized post footings on newer builds. In Silver Lake and Silver Firs developments, builders sometimes poured gate post footings shallow to keep the project moving. In 2021 and 2022, we saw a run of gates with posts that shifted within the first couple of years. Same symptom as the older neighborhoods – operator strains and stalls – but the fix is a re-poured footing, not a motor swap.
- Safety edge and photocell drift after windstorms. Everett sits in a wind corridor off Port Gardner, and after a winter blow, safety photocells mounted on posts can shift out of alignment. A UL 325 reversal test walks the owner through why the gate reverses for no visible reason – it’s seeing a phantom obstruction. We re-aim the beam or replace the edge, then cycle the gate through a full reversal test.
- Moisture in the control board and remote receiver. Rain-driven corrosion on control boards is common on older LiftMaster and BFT units mounted in metal boxes that weren’t weather-sealed. The gate works, then doesn’t, then works again. A new circuit board with a sealed enclosure typically solves it, and we quote it before we replace it.
Pricing for Gate Motor Repair in Everett, WA
We believe in honest numbers. A typical gate motor repair in Everett runs $225 to $650 for board work, limit switch replacement, harness repair, and similar component-level fixes. A full operator replacement lands between $850 and $2,400, depending on swing versus slide, the brand, and whether the existing mounting hardware can be reused. Remote replacement runs $45 to $95. Receiver board repair runs $180 to $420. Every quote is written and shown to you before any work starts. If the repair fails inside a year, we come back and fix it at no charge. No argument, no fine print.
Snow, wet gravel, and mud don’t change the price after it’s written. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Everett
Our Everett-based crews also run calls into Marysville, Lake Stevens, Mukilteo, and Snohomish. If your gate system is in any of those areas, we can reach you fast and bring the same written-price, full-guarantee service to Everett and the surrounding communities.
Serving Everett, WA – Our Local Coverage Area
We’re based in the Everett area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Everett
Usually no. In the older neighborhoods off Mukilteo Boulevard, the hinge post has often shifted in a weathered or undersized footing, and the motor is working against a bound gate. In newer Silver Lake builds, the original post footing may have been poured too shallow. Call (469) 530-2485 and we’ll diagnose the real cause before quoting any motor replacement.
A safety photocell or safety edge has drifted out of alignment, or a windstorm off Port Gardner knocked the beam off target, and the UL 325 reversal test is failing – the operator thinks there’s an obstruction. We re-aim the beam, replace the edge if it’s worn, and cycle the gate through a full reversal test on site.
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Parts for the three you asked about are usually on the truck when we pull up in Everett. Call (469) 530-2485 with the model number and we’ll confirm coverage before dispatch.
The fastest test is the wall button. If the gate works from the wall-mounted button but not the remote, the remote or receiver is the problem. If both are dead, the control board has likely failed. In Everett’s damp climate, receiver terminal corrosion is common. A replacement remote runs $45 to $95; a receiver board repair runs $180 to $420. We test both on-site and tell you exactly which part failed.
Most component-level repairs – limit switches, board swaps, remote programming, safety edge replacement – are done in 60 to 90 minutes on site. A full operator replacement runs 2 to 4 hours, depending on whether the mounting hardware and footings can be reused. We give you a written price and a realistic time frame before work starts. Call (469) 530-2485 and we’ll get you on the schedule.
Everett’s mix of older Mukilteo-Speedway-area homes and newer Silver Lake developments means gate operators face two different failure patterns – corroded old hinge posts in the older neighborhoods versus undersized post footings poured for faster installs in newer ones – so the same motor symptom can point to completely different root causes depending on which part of the city we’re in. We got a call from a homeowner near Silver Lake whose LiftMaster swing gate operator kept tripping its overload and stalling halfway through its arc; it turned out the hinge post had shifted in the original undersized footing, throwing the gate out of plumb and binding the arm. After re-pouring the post footing and running a proper sag correction, we re-commissioned the operator, re-aimed the safety photocell, and cycled the gate through a full reversal test – it’s been running clean since. That’s the kind of thing a motor swap alone would have masked for a few weeks.
If your gate isn’t working right in Everett, call (469) 530-2485. A live person answers, the quote is free, and the price is written before any work starts.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Everett since 2008.