Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Little Elm, TX
Carver Gate Repair handles residential gate work across Little Elm, TX, with a focus on repairs that last and prices that don’t move once the job starts. Homes here sit on flat, clay-heavy soil that shifts with rain and drought, and that movement is hard on gate posts, hinges, and motor alignment. If your gate drags, sticks, or won’t close, call (469) 530-2485 and a live person will answer.
Why Little Elm Homes Are Different
Little Elm’s housing stock runs from 1990s subdivisions near Eldorado Parkway to newer builds around Lake Lewisville and the Union Park area. Many homes are on what used to be farmland, and the expansive clay soil is the single biggest factor in gate work here. Posts set in concrete still heave a quarter-inch between wet and dry seasons, and that heave bends hinges, throws latch alignment, and pulls chain drives out of true. We see the evidence constantly: gates that closed fine in April catch the strike plate in August.
Summers are another layer. June through September runs 95 to 105 degrees, and motor electronics in black metal enclosures cook. Capacitors fail, limit switches drift, and circuit boards overheat. Gates on the west side of the house get it worst. When we repair a system in Little Elm, we account for both the soil under the posts and the heat load on the operator, because one without the other leaves a gate that fails again in six months. HOA communities along King Road and near Doe Branch Park often monitor gate condition, so residents get work done before a leaning post becomes a written notice.
Our Main Little Elm Services
Three services cover most of what Little Elm homeowners call us for: repairing a broken gate, installing a new one, and fixing the motor that moves it. Each has its own page with local pricing, timelines, and the exact process.
Gate Repair in Little Elm
Repair work in Little Elm usually starts with the same problem: a gate that’s sagged, stuck, or dragging across the driveway. Clay soil movement, failing hinge welds, and worn latch hardware are the common culprits. We straighten or replace posts as needed, re-weld or replace hinges, and set the gate so it travels clean through its full swing. Every repair gets a written price before work starts and a written one-year guarantee. See Gate Repair in Little Elm for full scope and pricing.
Gate Installation in Little Elm
New gate installs in Little Elm are measured and scheduled, not rushed. The main local consideration is the post footing. With expansive clay, we dig deeper and often pour wider footings than a standard installation spec calls for, because a gate that’s square the day it’s installed means nothing if the posts shift before the first summer ends. We quote the job, order the gate, and install when the materials are ready. See Gate Installation in Little Elm to understand what’s included and what it costs.
Gate Motor Repair in Little Elm
Motor failures in Little Elm spike in July and August. Heat in the operator enclosure, ants shorting contactors, and lightning-adjacent surges on exposed power runs are all local realities. We test the motor, gearbox, control board, and safety inputs before quoting, so you pay to fix what’s actually failed, not a guess. Technicians work on nine gate-motor brands and carry common boards, capacitors, and limit switches in the truck. See Gate Motor Repair in Little Elm for details.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Little Elm
Our technicians work on nine gate-motor brands, including Viking, Ghost Controls, DoorKing, and Elite, and carry common parts for each in our local trucks. Turnaround on repair is typically same-visit when the failed part is in stock. See our brands for the full list.
Pricing for Gate Company in Little Elm, TX
The table below gives typical price ranges for common gate work in Little Elm. Final prices are quoted in writing before any work begins.
| Service | Typical range in Little Elm |
|---|---|
| Gate repair (labor & standard parts) | $180 – $340 |
| Gate motor replacement | $600 – $1,200 |
| Gate installation (basic swing gate) | $1,200 – $2,500 |
| Gate installation (driveway slide gate) | $2,500 – $5,500 |
| Gate motor repair | $180 – $340 |
| Hinge replacement | $120 – $260 |
| Post reset (single post, concrete included) | $300 – $650 |
| Latch or lock replacement | $90 – $220 |
| Limit switch adjustment or replacement | $100 – $220 |
| Circuit board replacement | $220 – $480 |
| Loop detector repair or replacement | $180 – $350 |
| Remotes, keypads, and receiver programming | $60 – $180 |
Prices in Little Elm tend to rise when a post needs to be reset deeper than standard due to clay movement, or when a motor enclosure shows heat damage that took out multiple components at once. The price we write down before work starts is the price you pay, full stop.
Neighborhoods We Serve in Little Elm
We run calls throughout Little Elm, from the lakeside streets near Lake Lewisville to the newer developments east toward Providence and the older homes off FM 423. Most repair calls are reached within a day, and emergency gate-down calls get priority.
- Union Park
- Paloma Creek
- Frisco Ranch
- Sunset Pointe
- Doe Branch Park area
Service Area – Cities Near Little Elm
Our Little Elm crews also cover nearby North Texas towns. Homeowners in Lake Dallas, TX, Frisco, TX, The Colony, TX, and Aubrey, TX get the same written pricing and one-year guarantee on every repair.
Serving Little Elm, TX – Our Local Coverage Area
We’re based in the Little Elm area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Little Elm
Most repair calls in Little Elm are scheduled within one business day. A gate that won’t close is a security problem for your home and a liability, so we treat it as priority work. Call (469) 530-2485 and we’ll give you a straight answer on timing.
That depends on your community. Some HOAs along King Road and near the lake require written notice before a gate replacement. Homeowners are responsible for checking their HOA rules; we provide the measurements and specs they ask for. Little Elm does not require a city permit for most standard residential gate repair or replacement work.
Yes. When we repair or replace a gate motor in Little Elm, the job includes the power run to the operator, the safety edges, and any loop detector work. You don’t need to call a separate electrician. The price is written down before work starts, so there’s no surprise at the end.
Schedule Your Little Elm Gate Service
We answer our phones 24/7 with a live person, not a voicemail box. Every job gets a written price before work starts, a written one-year guarantee, and a clean site when we leave. Call (469) 530-2485 now for a free estimate on your gate repair, installation, or motor work in Little Elm.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Little Elm Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.