Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Texas City, TX
Gate work in Texas City carries two local patterns we plan for on every job: salt air from Galveston Bay moving inland, and driveways built for oversized vehicles. Most gates here are steel or iron, and the corrosion starts at the weld points and hinge barrels long before it shows on the face. That changes what we stock on the truck and what we recommend when we quote. Carver Gate Repair is the gate company Texas City homeowners call when a gate stops latching or a motor stops responding. Our technicians arrive in uniform, background-checked, with a written price before any work begins. Call (469) 530-2485 and a live person answers.
Why Texas City Homes Are Different
Texas City sits on flat, low-lying ground at the edge of Galveston Bay. The practical effect on gate work is constant: air that carries salt, soil that shifts, and wind that hits a swinging gate broadside. Galvanized steel holds up longer than bare iron near the water, but even galvanized posts eventually rust at the base where sprinkler runoff keeps the soil damp. We see this on older neighborhoods like the streets off 6th Avenue, where gates have been in the ground long enough for the post footings to settle and throw the latch alignment off.
Driveway gates here are frequently wider and heavier than what you find in newer subdivisions. Truck parking is common, and a gate built to clear an F-250 with a trailer needs hinges and posts sized for that load. When a gate drags at the latch post or the motor strains on open, the fix often starts with the post, not the operator. Homes along the bay side of FM 2004 and near the Texas City Dike deal with the strongest wind, which matters for swing gates: a gate that catches wind like a sail will wear out operators faster than one that sits sheltered. We factor that into our recommendations.
Our Main Texas City Services
Texas City homeowners call most often when a gate will not open or close reliably. Everything else usually starts with one of these three services.
Gate Repair in Texas City
A gate that drags, sags, or will not latch in Texas City usually traces back to the post or the hinges before it traces to the gate leaf itself. We align the posts, replace hinge barrels, and re-weld cracked joints where salt corrosion has taken hold, then set the latch so it closes without slamming. If the gate is racked from wind or the post has shifted in soft soil, the repair may include resetting the footing. Every repair carries a written one-year guarantee. See what a repair typically involves on our Gate Repair in Texas City page.
Gate Installation in Texas City
A new gate in Texas City has to be specified for bay air and sized for what actually drives through it, not what a builder assumed. That means a heavier post gauge near the water, galvanized or powder-coated steel, and a swing path checked against prevailing wind. We remove the old gate and hardware, set new posts to depth, and hang the gate so it opens without binding. A written price comes before we order anything. Details on materials and lead times are on the Gate Installation in Texas City page.
Gate Motor Repair in Texas City
When the gate leaf is sound but the operator will not respond, the fault is usually electrical or in the control board. We test the limit switches, loop detectors, and safety edges, then replace the failed component rather than selling a full operator when one is not needed. Texas City humidity and salt air shorten the life of exposed wiring and connections, so we check those fittings on every motor call regardless of the complaint. If the operator itself is done, we quote a replacement matched to the existing brand. Read more on our Gate Motor Repair in Texas City page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Texas City
Our technicians are trained on the operators we see most across Texas City driveways, including Linear, Viking, Ghost Controls, and DoorKing. We keep common control boards, limit switches, and remote receivers on the truck for same-day motor repairs. For less common parts, our our brands page lists the full range we order from.
Pricing for Gate Company in Texas City, TX
| Service | Typical range in Texas City |
|---|---|
| Gate hinge replacement (steel or iron) | $180 – $340 |
| Gate post reset or reinforcement | $295 – $610 |
| Latch and strike alignment | $110 – $240 |
| Swing gate operator replacement | $950 – $1,850 |
| Sliding gate motor replacement | $1,050 – $2,200 |
| Control board replacement | $350 – $720 |
| Loop detector replacement | $250 – $485 |
| Safety edge or photo eye replacement | $180 – $365 |
| New gate installation (single swing, steel) | $2,800 – $5,600 |
What moves a Texas City price is the same thing we look for on every call: heavier-gauge steel near the water, wider driveway openings, and concrete footings that need to be cut and re-poured. The quote is written before work starts, and that written number does not change at the door.
Neighborhoods We Serve in Texas City
We run calls across the full Texas City area, from the older streets near 6th Avenue to the subdivisions off Loop 197 and the bay side of FM 2004. Most jobs fit into a same-week schedule, and motor repairs can often be worked in same-day.
- Bay Ridge
- Gulfway Terrace
- Sterling Lake
- Mainland Park
- Shoreacres
Service Area – Cities Near Texas City
We also serve homeowners in nearby communities along the bay. If your gate is just outside Texas City, we’re scheduling in La Marque, TX, Hitchcock, TX, Dickinson, TX, and Bacliff, TX. Crews are dispatched and scheduled from our Houston office, and service the Texas City area locally.
Serving Texas City, TX – Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Texas City
Most repair calls get a same-week appointment. Gate motor failures are often same-day when the part is on the truck. Live-person phone coverage is 24/7, so you will always reach a person at (469) 530-2485.
It depends on the scope. Replacing a motor or hinges typically does not require one. New installations with new driveway posts can trigger a city permit, and we confirm that before the work starts so nothing holds up the job.
The guarantee is in writing on every repair and covers the work for a full year from the date of service. If the repair fails in that window, we return and correct it free of charge, no argument.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Texas City Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.