Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Pico Rivera, CA
Gate repair in Pico Rivera usually means working on a steel or wrought-iron driveway gate that has been opening and closing for 20 to 40 years, often without much maintenance in between. Most of the homes here were built between the 1950s and 1970s, so many properties still have their original swing gate frames with newer operator motors bolted on. The work in Pico Rivera is straightforward but particular: tight lot lines, shallow setbacks, and older concrete posts that have shifted over time. If your gate is binding, sagging, or failing to open, call us at (469) 530-2485 for a written price before any work starts.
Why Pico Rivera Homes Are Different
Pico Rivera is a grid of neighborhoods where houses sit close together, and that changes how gates are installed and repaired. Many homes along streets like Passons Boulevard, Rosemead Boulevard, and Whittier Boulevard have narrow driveways with fences running right up to the property line. A gate that swings outward has to clear the sidewalk, which means the hinge posts and swing arc get measured carefully before any new gate goes in. A gate that swings inward often has to stop short of a car parked in a shortened driveway. Those clearances are tighter in Pico Rivera than in newer subdivisions with wider lots.
Most of the housing stock dates from the post-war building boom, which means a lot of original steel posts set in concrete that has since cracked or tilted. When a post moves, the gate binds on the latch side or drags on the ground, and the motor starts fighting itself. We see that constantly in the older blocks east of the 605 and west of the San Gabriel River. Summer heat also plays a role: metal gates expand in the afternoon and the gap at the latch closes up, which is why a gate that works at 8 a.m. will not close at 3 p.m. in August. Limit switches need to be set with that expansion in mind, or the gate will keep faulting out every afternoon.
Pico Rivera does not have a single citywide HOA, but several neighborhoods have active associations that regulate fence and gate appearance, especially along the main corridors. If you are in a pocket with design review, we will match the existing steel style and height so the new gate does not get flagged. Permits are handled at the city level for any new gate that includes a concrete footing or electrical run, and we make sure that piece is sorted before the first day of work.
Our Main Pico Rivera Services
The two calls we take most often in Pico Rivera are for broken driveway gates and for motors that have stopped responding. Here is what each job involves here.
Gate Repair in Pico Rivera
Most gate repairs in Pico Rivera come down to three things: a sagging leaf, a hinge or post that has given out, or a latch that no longer lines up. Welding cracks in steel frames, re-setting posts in fresh concrete, and straightening bent top rails are common. We carry steel stock, hinge sets, and latch hardware on the truck so most repairs finish in one visit. When a gate has been dragging on the concrete for months, the lower corner is usually worn or the post is leaning, and both get addressed at the same time. See the full scope on our Gate Repair in Pico Rivera page.
Gate Installation in Pico Rivera
A new gate in Pico Rivera has to work with the existing driveway width, the slope at the curb, and whatever the neighbor’s fence is doing on the property line. We measure the opening at three heights, check the post footings, and build the gate to swing clear of the sidewalk or the parked car, whichever is tighter. New gates are built from steel tube or ornamental iron, powder-coated or primed for paint, and set on new hinges rated for the leaf weight. Every installation includes a written price before work begins. Details are on the Gate Installation in Pico Rivera page.
Gate Motor Repair in Pico Rivera
Gate motor failures in Pico Rivera follow a pattern: the motor runs but the gate does not move, or the gate starts and reverses halfway. The first usually means a stripped gear or a broken chain inside the operator. The second almost always means a limit switch or a safety sensor issue. We service swing and slide operators across the main brands, replace control boards, and re-set limits to account for the heat expansion common in this part of Los Angeles County. For the full list of motor work, see Gate Motor Repair in Pico Rivera.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pico Rivera
We work on the operators already installed on Pico Rivera driveways, including Linear, Viking, Ghost Controls, and DoorKing. Replacement boards, remotes, and safety edge parts are stocked locally so most motor repairs do not wait on shipping. For the full list, see our brands.
Pricing for Gate Company in Pico Rivera, CA
| Service | Typical range in Pico Rivera |
|---|---|
| Gate repair, minor (latch, hinge, bracket) | $185 – $350 |
| Weld repair on steel gate frame | $250 – $600 |
| Gate realignment (binding or dragging) | $220 – $450 |
| Gate motor diagnostic | $95 – $175 |
| Limit switch replacement and adjustment | $180 – $320 |
| Control board replacement | $350 – $750 |
| Swing motor replacement (standard residential) | $750 – $1,250 |
| Slide motor replacement (standard residential) | $800 – $1,400 |
| Chain drive replacement | $250 – $500 |
| Gate battery backup install | $400 – $800 |
| Keypad installation | $200 – $400 |
What pushes a Pico Rivera job toward the top of these ranges is usually the post condition: if the concrete has cracked and the post has to be re-set, that adds time before the gate itself can be touched. Every price is written and agreed to before any work starts, and the number does not move at the door.
Neighborhoods We Serve in Pico Rivera
We cover the full city, from the blocks along Whittier Boulevard up to the neighborhoods near the 605. Typical response for gate repairs in Pico Rivera is same-day or next-day, depending on when the call comes in.
- Pico Rivera Central, near Passons and Slauson
- Rivera area, west of Rosemead Boulevard
- North Pico Rivera, along Washington Boulevard
- South Pico Rivera, near Mines Avenue
- Beverly Road corridor
Service Area – Cities Near Pico Rivera
Along with Pico Rivera, our crews regularly run to the neighboring cities for gate and motor work. If you are in Montebello, CA, Santa Fe Springs, CA, Whittier, CA, or Bell Gardens, CA, the same written pricing and guarantee apply.
Serving Pico Rivera, CA – Our Local Coverage Area
We’re based in the Pico Rivera area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pico Rivera
For a gate that will not open or will not close, we aim for same-day or next-morning dispatch anywhere in Pico Rivera. Scheduling is coordinated from the brand’s Los Angeles office, with crews serving the city locally. Call (469) 530-2485 and you will reach a live person who can give you a window that day.
Astro-turf aside, a straight gate swap on existing posts usually does not need a permit. A new concrete footing or an electrical run for a motor does. We confirm city requirements before the job starts so the work is not held up on the day of installation.
Every repair carries a written guarantee good for a full year from the date of service. If the repair fails inside that window, the second visit is free. That is the Garrison Standard, and it is in writing on every job we do in Pico Rivera.
If your gate is down or acting up in Pico Rivera, call (469) 530-2485. You will get a written price before any work starts, and a real person on the phone whenever you call.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pico Rivera Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.