Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor Repair Across Southlake
When a gate motor quits in Southlake, it rarely fails politely. You’re usually late for work, the car is idling, and the gate is stuck half open. We get it. Our crews run gate motor repair calls across Southlake every week, from Timarron to Carillon to the streets off Davis Boulevard, so a technician who knows the area can be at your property quickly. Call (469) 530-2485 and you’ll reach a live person who can schedule a repair, not a voicemail box. Most gate motor repairs in Southlake are diagnosed same day and fixed on the first visit.
Why Carver Gate Repair Is Southlake’s Preferred Gate Motor Repair Company
Southlake homeowners tend to ask the same two questions before anyone touches their gate: who is actually showing up, and what is this going to cost. We answer both before we arrive. Every technician Carver dispatches is background-checked and uniformed, so the person at your gate matches the name on the work order. And every repair comes with a written price agreed before any work starts. That is not a courtesy. It is The Garrison Standard, and Carver has operated under it since 2008 as part of the Garrison Partners family.
Southlake has a particular mix of large-lot estate gates in neighborhoods like Estes Park and Wyndham Lakes, plus smaller wrought-iron drive gates on older builds off Southlake Boulevard. That mix means we see every brand and every failure mode. Our technicians carry parts for LiftMaster, FAAC, BFT, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule on the truck, which cuts out the second visit a lot of generalist shops need. The work is backed by a written guarantee good for a full year, and if a repair fails inside that window, the second visit is free. No charge, no argument.
As a local partner, Gate Motor Repair in Southlake is a specialty page for this exact area, and our team knows the shortcuts through Southlake’s school-zone traffic as well as any local service crew. Scheduling is coordinated from the brand’s Dallas-Fort Worth office, with crews dispatched to Southlake daily.
Gate Remote Control in Southlake
Gate Remote Control work in Southlake usually means one of three things: a remote that stopped working altogether, a remote that only works at close range, or a homeowner who needs a spare programmed for a second car, housekeeper, or landscaper. The fix can be as simple as a new battery or as involved as resetting the receiver board and reprogramming every transmitter on the system. In Southlake, we often find remote issues tied to the same hail and surge problems that knock out operator boards. A lightning strike near an open lot can scramble receiver codes. A cracked control-box cover from hail lets in moisture that degrades the antenna connection.
Remote Diagnostics and Reprogramming
We test remotes with a signal meter before replacing anything, because a weak remote is not always a bad remote. Sometimes the receiver antenna on the operator was snapped by wind or bent during a landscaping job. In those cases, the remote is fine and the real fix costs less than a new transmitter. Other times, the remote’s internal contacts are worn and it genuinely needs replacement.
Adding a Second or Third Remote
Southlake households with multiple drivers often keep more cars than openers. We can clone or program additional remotes for most LiftMaster, FAAC, Viking, and DoorKing operators the same day. Expect programming for a basic additional remote to run roughly $60 – $120 including the transmitter and labor. A full reprogramming of all remotes after a board replacement typically adds about $45 – $90.
Gate Keypad in Southlake
Gate Keypad issues in Southlake often surface after a storm or after a change in household routine. A keypad that worked for years suddenly stops accepting the code, or the buttons work but the gate ignores the command. Sometimes it is the keypad itself, corroded from exposure on a south-facing gate post off Dove Road. Other times the keypad is fine and the receiver inside the operator is the culprit. We diagnose both before recommending any replacement.
Replacing a Worn Keypad
A standard outdoor gate keypad replacement in Southlake typically runs $150 – $300 installed, depending on whether the gate is a swing or slide type and whether the existing wiring is salvageable. We use weather-rated keypads built for North Texas sun, because a cheap indoor-style keypad will fail here within a season or two. The new keypad gets programmed with your code and tested at the gate, not just from the house.
Adding Keypad Entry to an Existing Operator
If your gate never had a keypad and you want one added to a LiftMaster or FAAC operator, it is usually a straightforward wireless addition. The keypad mounts to the post or a pedestal and pairs with the existing receiver. For a standard installation, expect to pay around $220 – $400, depending on whether the keypad needs a dedicated mounting pedestal and any wire run through conduit.
Trusted Brands We Service in Southlake
Southlake gates run on a wide mix of equipment. We work on all of it. Our technicians are factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because a Viking swing operator and a Ghost Controls slide operator fail differently and need different parts. Carver keeps a rolling stock of common boards, limit switches, photocells, and remotes for those brands on our DFW-based trucks, which means most Southlake repairs are completed the same day we arrive. We do not make you wait a week for a part to ship from a distributor in another state.
Common Gate Motor Repair Problems We See in Southlake Homes
- Hail-cracked control boxes and waterlogged boards. Southlake sits in the DFW hail corridor, so operator covers take direct hits. A cracked cover lets rain into the control box, and a corroded board is usually the next call we get.
- Misaligned or hail-damaged safety photocells. Photocells are the small sensors near ground level on each side of the gate. Hail, mower bumps, and landscaping crews knock them out of alignment, and the gate will refuse to close or will reverse mid-cycle.
- Clay-soil hinge post movement. North Texas soil swells after rain and shrinks in drought. Over years, that movement tilts the hinge post just enough to make the gate drag or bind. Homeowners often think the motor is shot when the real problem is the post.
- Lightning surges frying the operator logic board. Southlake’s open lots and tall mature trees make nearby strikes common. Older installs rarely have surge protection, and a single storm can take out the board, the receiver, or both.
Pricing for Gate Motor Repair in Southlake, TX
Diagnostic service on a gate motor repair in Southlake typically runs $79 – $149, and that fee is waived if you approve the repair on the same visit. A standard repair such as replacing a limit switch, realigning a photocell, or swapping a receiver board usually lands between $180 and $400. A full gate operator replacement, including the motor, control board, and arm assembly, generally runs $1,200 – $3,200 depending on gate size, brand, and whether the power run needs updating. Every price is written down and agreed before we start. No estimate grows once the job is open. We also provide a free estimate over the phone for common repairs when you describe the symptoms.
We Also Serve Cities Near Southlake
Carver’s Gate Motor Repair team covers Southlake and the surrounding communities daily. If your property is in Colleyville, Grapevine, Flower Mound, or Roanoke, the same background-checked technicians and written pricing apply. Call the same number and we will schedule the nearest available crew. Our live-person coverage runs 24/7, including weekends and holidays.
Serving Southlake, TX – Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in Southlake
In most Southlake homes, a motor that hums but a gate that will not move means the problem is mechanical, not electrical. The release lever may have been pulled, the drive chain may have slipped, or the gate itself may be binding against a shifted hinge post. Clay-soil movement in this area regularly rolls posts out of plane, and the motor is just fighting a gate that no longer swings true. We check the operator output and the gate travel before replacing any part. Call (469) 530-2485 and describe what you hear when the motor runs; that alone often tells us whether you need a repair visit or a simple fix over the phone.
After a hailstorm or high wind in Southlake, the safety photocells near the bottom of the gate posts are the most likely thing to have moved. A working photocell will stop or reverse the gate when you pass your hand through the beam while the gate is closing. If the gate keeps closing through the break, or if the gate refuses to close at all, the photocell is either misaligned or dead. Misalignment is a quick fix on a service call. A hail-cracked photocell usually needs replacement. We include photocell alignment and a reversal test standard on every gate motor repair.
Yes, nearly every LiftMaster and FAAC operator installed in Southlake can accept a wireless keypad add-on. The keypad mounts on a post or pedestal, pairs to the existing receiver, and is programmed with your chosen code. A typical install runs $220 – $400. If the operator is an older FAAC model without a compatible receiver, we may need to add a standalone receiver module first. We always quote that separately and in writing before starting the work.
That symptom in Southlake usually points to an antenna problem at the operator, a degraded receiver board, or a remote whose battery is on its way out. We test the remote’s signal strength with a meter and check the operator antenna for storm damage. If the antenna was snapped or the receiver board is failing, we fix it at the operator, not by selling you another remote. This fix is common after hail season, when control-box damage also stresses the receiver wiring.
No. A sagging gate in Southlake is often a hinge post problem, not a motor problem. North Texas clay soil expands and contracts through the wet-dry cycle, and over years the post can tilt even when the concrete footing looks fine. We recently traced a LiftMaster swing gate failure in the Carillon neighborhood to a misaligned safety photocell that had been nudged by a landscaping crew. The motor was fine. We realigned the photocell, ran the reversal test, and the gate cycled clean. We also checked the hinge post for sag, because the clay in that neighborhood shifts more than most. Before anyone sells you a new operator, get the post and the gate geometry checked. It often saves you two or three thousand dollars. Call (469) 530-2485 for a free phone assessment.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Southlake with written prices and a full-year guarantee on every gate motor repair.