Gate Motor Repair in White Plains - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Motor Repair Across White Plains

Gate motor repair in White Plains typically runs between $185 and $420 for most operator failures, with full motor replacements landing in the $950 to $2,400 range depending on the system. We dispatch technicians to White Plains every weekday, and our live phone line at (469) 530-2485 takes calls around the clock, weekends included. When a gate won’t open on Mamaroneck Avenue or a swing gate stalls off North Broadway, you want a crew that knows the difference between a dead motor and a cracked footing before the truck even rolls up.

Call (469) 530-2485

We’re Carver Gate Repair, part of the Garrison Partners family and operating to The Garrison Standard since 2008. We work exclusively on gates and their motor systems, which means our technicians arrive having already diagnosed hundreds of failures specific to White Plains’ older driveway construction and close-to-the-street gate setups. For broader context on how we work, see our Gate Motor Repair service hub.

Why Carver Gate Repair Is White Plains’s Preferred Gate Motor Repair Company

Homeowners across White Plains call us for one reason more than any other: the price we quote on the phone or at the gate is the price on the written estimate, and that number does not move once the work is open. Every Carver technician is background-checked, uniformed, and dispatched with the parts inventory to handle most Gate Motor Repair in White Plains jobs in a single visit. That matters when your gate is stuck open on a street like Ridgeway where foot traffic passes by.

We’re not the cheapest option, and we don’t try to be. What we offer is a clear, unhurried explanation of what failed, what it costs to fix, and what’s worth doing now versus later. The written guarantee covers every repair for a full year from the service date. If the same failure recurs inside that year, we come back at no charge. That’s The Garrison Standard applied to every job in White Plains, and it’s non-negotiable.

Gate Keypad in White Plains

A Gate Keypad in White Plains is the most common point of failure we see on gate systems throughout the city, and the cause is usually not the keypad itself. White Plains’ close-to-the-street driveways, especially off Lake Street, Ridgeway, and the older downtown-adjacent blocks, expose low-voltage control wiring to winter road salt and road splash. The terminals at the gate operator corrode, the keypad goes intermittent, and homeowners assume the keypad needs replacing. Before we sell a new one, we test the wire run and clean or re-terminate the connections. A keypad replacement in White Plains typically runs $145 to $285 installed, and a full wiring repair can add $80 to $200 depending on the run length.

Keypad Symptoms We Fix on White Plains Driveways

When a keypad entry works in the dry summer months and then fails or misfires from December through March, corrosion at the operator low-voltage terminals is nearly always involved. We inspect the keypad contacts first, then the wire terminations at the operator, then the sealing around the keypad face. Many older White Plains keypad enclosures are mounted with the wiring running through unsealed holes in the gate post, which lets moisture in.

What a Proper Keypad Repair Includes in White Plains

Our technicians clean and re-seal every termination, replace corroded wire ends, and test the keypad across its full code range before calling the job done. If a new keypad is actually required, we install one matched to your existing opener brand rather than forcing a universal unit into a system it doesn’t fit. The written guarantee covers the repair for a full year.

Gate Closer Spring in White Plains

A Gate Closer Spring in White Plains tends to fail on wrought-iron swing gates built during the 1950s and 1960s, which are concentrated along the older residential edges near the downtown core. These springs take a beating because many of these gates sit close to the sidewalk, so travel has to be set short and the spring loads every time the gate stops hard against its limit. When a closer spring snaps, the gate loses tension on the closing stroke and either drifts open or slams shut. A gate closer spring replacement in White Plains typically runs $145 to $240 installed, depending on the gate weight and spring type.

Why a New Spring Isn’t Always Enough

On older White Plains gates, the closer spring often shares a pivot with the hinge post, and that post may be the real problem. If the concrete footing has cracked and allowed the post to tip, the gate sags and the new spring works against a misaligned load. We check the post angle and footing before swapping the spring so you’re not back to square one in six months.

What We Look For on Spring Failures in White Plains

We measure the gate’s travel distance against the sidewalk clearance, then set the new spring’s tension to close the gate fully without slamming. We also inspect the hinge pins, the closing speed adjustment, and the operator’s reverse settings so the spring works within the system rather than fighting it. Every repair carries our written one-year guarantee.

Trusted Brands We Service in White Plains

Our technicians are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, so the parts on the truck match the system already installed on your White Plains property. We stock common Viking and Ghost Controls parts, along with DoorKing and Elite components, for faster turnaround on repairs throughout White Plains. When a specific board or limit switch isn’t on the truck, we can usually have it in hand within one business day through our local parts channels. What we never do is substitute a knockoff part to finish a job faster.

Common Gate Motor Repair Problems We See in White Plains Homes

• False reversal on older swing gates. A cracked concrete hinge post footing lets the gate sag into the photocell beam. The operator reads an obstruction and reverses, which homeowners describe as “the motor is dying” when the motor is actually fine. On White Plains streets like Lake Street and Ridgeway, we see this more than any genuine motor failure.
• Corroded low-voltage terminals at the operator. Winter road salt and rain splash reach the gate post on driveways close to the street, corroding keypad and loop detector terminations. Intermittent keypad behavior in cold weather is almost always this issue in White Plains, not a bad keypad.
• Operators tripping their internal breaker. When a slide gate or swing gate was originally matched to a lighter weight and the gate later gained a binding roller or worn hinge, the operator’s internal breaker trips. We see this on White Plains properties where gates are 20 to 40 years old and the operator was never resized for the current load.
• Limit and reversal settings knocked out of travel range. Gates set close to the sidewalk have limited travel distance, and when the limit switch drifts, the gate either stops short of closing or over-runs onto the walkway. White Plains’ tight clearance on older driveways makes this a common adjustment call.

Pricing for Gate Motor Repair in White Plains, NY

We Also Serve Cities Near White Plains

We dispatch technicians from our New York City office to White Plains and the surrounding area, including Yonkers, New Rochelle, Mount Vernon, and the Bronx. Most White Plains calls are scheduled within a day, and our live phone line at (469) 530-2485 is answered by a person every time, day or night. If your gate is down on the border of White Plains and any neighboring city, we still cover the call.

FAQs About Gate Motor Repair in White Plains