Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Galveston, TX
Carver Gate Repair handles gate and gate motor work across Galveston, TX with written prices, background-checked technicians, and a one-year guarantee on every repair. Galveston’s salt air, high water table, and older housing stock make gate work here different from inland towns. We quote a price before any work starts, and that number does not move. For a free estimate, call (469) 530-2485.
Why Galveston Homes Are Different
Galveston’s gates take more abuse than most. The island’s salt-laden air corrodes hinges, tracks, and motor housings faster than dry inland climates do. Galvanized hardware rusts through in a few years near the seawall. Powder-coated steel holds up better, and we recommend it on any gate within a half-mile of the beach. The soil is another factor. Much of Galveston sits on sandy, shifting ground, which means gate posts lean over time and pull the gate out of square. A gate that dragged a year ago may now bind against the latch post because the post itself moved.
Housing here runs from raised Victorian cottages in the East End to mid-century brick homes around Lindale Park and newer construction west of 61st Street. Many older Galveston homes have narrow driveways with short setbacks, so driveway gates often sit close to the street and need to swing inward, not outward. HOA rules in communities like Evia and Pirates Beach can dictate gate height, finish, and even motor type. We work around those requirements daily.
Our Main Galveston Services
Most Galveston homeowners call us about two things: a gate that stopped opening, or a gate they want replaced before hurricane season. Here are the three services we handle, each on its own page with Galveston-specific details.
Gate Repair in Galveston
Galveston gates fail in predictable ways: rusted hinges, sagging corners where welds gave out, and latch posts that shifted in sandy soil. Our technicians inspect the full gate before quoting, so the written price covers what is actually wrong, not a guess. We carry common hinge and roller sets on the truck and can complete most repairs in a single visit. Salt corrosion near the beach means we often replace hardware with coated or stainless parts rather than reusing what failed. Gate Repair in Galveston covers the full scope.
Gate Installation in Galveston
New gates in Galveston need to survive salt air, shifting ground, and coastal wind loads. We measure the opening, check post depth against local soil conditions, and recommend materials that will not rust through in three years. For homeowners replacing a gate after a storm or a failed weld, we remove the old gate and hardware, set posts to the right depth, and hang the new gate square. Gate Installation in Galveston explains the process and what to expect.
Gate Motor Repair in Galveston
Gate motors on the island fail most often from moisture intrusion and salt corrosion on control boards. We open the motor housing, test the limit switch and loop detector, and replace only the parts that are actually failing. If the motor is beyond repair, we can quote a replacement matched to the existing wiring and control setup. Gate Motor Repair in Galveston has the full breakdown.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Galveston
We service FAAC, BFT, Linear, and Viking gate motors, along with five other major brands. Our technicians carry common control boards, limit switches, and remotes for these systems, which keeps most motor repairs to a single trip. For parts we do not have on the truck, we can usually our brands source them within two business days.
Pricing for Gate Company in Galveston, TX
| Service | Typical range in Galveston |
|---|---|
| Gate alignment and sag correction | $180 – $340 |
| Hinge replacement (standard steel) | $150 – $300 per hinge set |
| Roller tray and track repair | $200 – $420 |
| Gate motor repair (board or limit switch) | $250 – $550 |
| Gate motor replacement (basic slide or swing) | $850 – $1,800 |
| Loop detector installation or replacement | $300 – $600 |
| Full gate installation (single swing, steel) | $2,200 – $5,500 |
| Welding repair (cracked frame or corner) | $150 – $400 |
| Remote and keypad programming | $75 – $175 |
Salt-air corrosion and rusted hardware are the two biggest price drivers in Galveston. A hinge that looks like a simple swap may reveal a rusted-through gate frame once the old hardware comes off. Whatever the scope, you get the written price before any work begins, and that is the price you pay.
Neighborhoods We Serve in Galveston
We work throughout Galveston Island and on the mainland communities just across the causeway. Our technicians are on the island most weekdays, so response time is usually same-day or next morning.
- East End Historic District
- Lindale Park
- Evia
- Pirates Beach
- West End / Sea Isle
Service Area – Cities Near Galveston
We also serve homeowners across the causeway in Texas City, TX, La Marque, TX, Hitchcock, TX, and Dickinson, TX. Scheduling and dispatch are coordinated from the brand’s Dallas-Fort Worth office, and crews serve Galveston locally. Call (469) 530-2485 and a live person answers, day or night.
Serving Galveston, TX – Our Local Coverage Area
We’re based in the Galveston area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Galveston
Most Galveston calls are handled same-day or next morning. We keep technicians on the island during the week, so you are not waiting for a crew to drive down from Houston. Call (469) 530-2485 and we will give you an arrival window on the spot.
Some Galveston HOAs require approval for new gate height, finish, or motor type. The City of Galveston does not generally require a permit for a residential driveway gate replacement, but if your HOA has rules, we work within them. We can note any HOA requirements on the written quote.
Our 365-Day Done Right Promise covers every repair in writing for a full year from the date of service. If the same repair fails inside that window, we come back and make it right at no charge. It is a written guarantee, not a verbal promise. The page for home details what to expect from start to finish.
Call (469) 530-2485 for a free estimate on gate repair, gate installation, or gate motor repair in Galveston. A live person answers, the price is in writing before work starts, and the guarantee is good for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Galveston Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.