Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Beverly Hills
Gate repair in Beverly Hills usually costs $180 – $340 for hinge, alignment, or lock work, and a gate operator replacement typically runs $1,100 – $2,800 depending on the motor, the hillside conditions, and whether battery backup or solar is required. We answer the phone live at (469) 530-2485 and can typically have a uniformed, background-checked technician at a Beverly Hills property the same day for a repair. If you’re on Laurel Way, Benedict Canyon, or the flats south of Sunset, we know the driveways, the gate styles, and the failure points that show up here more than anywhere else.
Most Beverly Hills gates are either original wrought iron swing gates on older estates or heavier steel slide gates on hillside lots. Both present real problems when the ground shifts, when the operator is undersized, or when the safety system has been patched rather than replaced. This page explains what actually fails on Beverly Hills gates, what it costs to fix, and how we work so you get a written price before anything is opened up.
Why Carver Gate Repair Is Beverly Hills’s Preferred Gate Repair Company
Homeowners in Beverly Hills call us because the gate is the one part of the property that has to work every single time, and they’re tired of technicians who show up late, quote a number, then move it after the gate is in pieces. We run on The Garrison Standard, which has governed every Carver location since 2008. That means a written price before any work starts, background-checked uniformed technicians on every call, and a written guarantee on every repair, good for a full year. Not verbal. On the invoice.
Our reputation in Beverly Hills comes from the hillside and estate work most gate companies avoid. We’ve rebuilt post footings on Benedict Canyon, re-racked slide gates on Laurel Way, and re-wired loop detectors and photoelectric sensors on long driveways throughout Beverly Hills. The dispatch and scheduling for this area is coordinated from our Los Angeles office, and crews are routed into Beverly Hills daily, so response times are short and the technician who arrives already knows the local terrain.
Lonnie Burke leads the company, and The Garrison Code is simple enough to print on a work order: show up on time, leave the site clean, quote a price that doesn’t move, and stand behind the repair for a full year. If a repair fails inside the guarantee window, the second visit is free. No charge, no argument. That’s been the rule since day one, and it’s the reason Beverly Hills homeowners keep our number instead of shopping around each time the gate acts up.
Wrought Iron Gate Repair in Beverly Hills
Wrought iron gate repair in Beverly Hills is one of our highest-volume call types, especially in the estate neighborhoods north of Sunset where original iron gates have been standing for decades. The iron itself rarely fails first. What fails is what the iron hangs on: hinge posts that have sagged, weld points that have cracked at stress joints, and bottom rails that have been dragging on settled driveways. A typical wrought iron hinge or weld repair runs $220 – $480; a full hinge post reset or footing repair can range from $600 to $1,400 depending on excavation depth and whether concrete needs to be re-poured.
We repair the iron, but we also check what caused the damage. In Beverly Hills, that’s usually slope settlement or years of an operator pulling harder than the leaf was ever designed to handle.
Hinge Post Resets and Footing Repair
When a Beverly Hills hillside shifts, even an inch, a wrought iron swing gate starts to drag or bind. Straightening the panel won’t fix it if the post is leaning. We excavate the footing, re-pour to grade, re-set the post, and then re-hang the leaf so the weight sits true. This is the kind of repair that separates a gate company from a welder with a truck.
Weld Repair and Stress Cracking
Older iron gates in Beverly Hills were often site-built, which means the original welds weren’t always done to modern standards. When an operator yanks on a leaf for a decade, cracks open at the top hinge mount and the bottom rail joint. We grind the failed weld back to clean metal and re-weld with the gate braced and supported, not hanging. A field weld on a proper repair should look as clean as the original fabrication.
Metal Gate Repair in Beverly Hills
Metal gate repair in Beverly Hills covers the full range of steel and aluminum work we see on modern estates, from bent slide gate frames to corroded powder coating to rack systems that have been knocked out of alignment by a settling driveway. Steel slide gates on hillside properties take more punishment than almost any other gate type, because a quarter-inch of concrete movement at the post translates to a half-inch of rack misalignment at the drive gear. Most metal gate repairs in Beverly Hills run $200 – $500 for frame straightening, $350 – $900 for rack and pinion replacement, and $800 – $1,800 for a full slide gate rebuild on a hillside property.
Slide Gate Rack and Track Repair
Long, steep driveways on streets like Laurel Way put enormous strain on slide gate hardware. When the rack drifts out of alignment, the operator strains, the gate jerks, and eventually the motor burns out. We re-shim or replace the rack, re-set the rail to a true line, and then program the travel limits so the motor isn’t fighting the gate at either end of its travel.
Frame Straightening and Corrosion Repair
Beverly Hills metal gates often show corrosion at the bottom rail where irrigation overspray or hillside runoff keeps the metal wet. We strip the failed section, weld or straighten the frame, and re-coat so the repair doesn’t announce itself. The goal is a gate that operates clean and looks like it was always right.
Trusted Brands We Service in Beverly Hills
Our technicians train on nine gate-motor brands, including Linear, Viking, Ghost Controls, and DoorKing, so we can handle everything from vintage estate openers to new solar gate operators, and our Beverly Hills Gate Motor Repair covers all of them. We carry common boards, limit switches, and photocells on the truck, and our Los Angeles parts inventory means most Beverly Hills repairs are completed in one visit rather than two. When a DoorKing or Viking operator on a hillside property fails, we don’t guess at the problem and order a part blind. We diagnose it, show you the failed component, and give you the written price before the work starts.
For more detail on how our repair process works across all gate types, see our Gate Repair service page.
Common Gate Repair Problems We See in Beverly Hills Homes
- Hillside settlement throwing off slide gate alignment. Driveways on Laurel Way and Benedict Canyon settle over time, and the concrete post footings move with them. The result is a rack that drifts out of true, an operator that strains and jams, and a gate that eventually stops mid-travel.
- Hinge post sag on original wrought iron swing gates. Older Beverly Hills estates often have iron leaves that were never balanced for today’s heavier operators. Chronic sag usually means the post footing itself has been compromised, and straightening the panel alone won’t hold.
- Safety photocell and loop detector failures on long driveways. Buried conduit running from the house to the gate is a magnet for rodent damage and moisture. When the photocell goes dark, the gate no longer reverses as UL 325 requires, and that’s an entrapment safety issue, not a convenience problem.
- Battery backup and solar operator failures. Hillside properties in Beverly Hills frequently pair their gate operators with battery backup or solar because a brownout leaves a gate stuck open to the street. When the backup system fails, the gate behaves erratically in ways that are easy to misdiagnose.
Pricing for Gate Repair in Beverly Hills, CA
Gate repair in Beverly Hills follows a predictable range, and we always write the number down before any work starts. Hinge and alignment work runs $180 – $340. Weld and rust repair runs $220 – $480. Slide gate rack replacement runs $350 – $900. Gate operator replacement runs $1,100 – $2,800, and that’s where Beverly Hills hillside conditions matter most: battery backup, solar panels, longer power runs, and oversize operators all push the cost toward the top of the range. A flat-lot gate in West Hollywood might use a standard 1/2-HP operator for well under $1,500, but that same setup often isn’t enough for a Benedict Canyon driveway. Call (469) 530-2485 and we’ll give you a straight written quote for your specific gate and your specific hillside, before anyone touches a wrench.
What a Typical Beverly Hills Gate Repair Costs
- Hinge repair or realignment: $180 – $340
- Weld repair or frame straightening: $220 – $480
- Slide gate rack replacement: $350 – $900
- Hinge post reset or footing re-pour: $600 – $1,400
- Gate operator replacement (including hillside labor): $1,100 – $2,800
- Battery backup or solar integration: $400 – $1,200
One thing we’re explicit about: the price we quote is the price on the invoice. Every Carver location operates under the same rule, and it’s been that way since 2008. If the technician finds a hidden problem once the gate is open, the new number gets written down and agreed to before any additional work proceeds. No moving targets.
We Also Serve Cities Near Beverly Hills
While this page focuses on Gate Repair in Beverly Hills, our crews handle gates throughout West Hollywood, Culver City, Santa Monica, and Marina del Rey. The flat-lot gates in those cities have their own failure patterns, but the standard is the same: written pricing, background-checked techs, and a full-year written guarantee on every repair.
Serving Beverly Hills, CA – Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Beverly Hills
The panel almost certainly wasn’t the problem. In hillside areas like Laurel Way and Benedict Canyon, the hinge post footing settles over time, which causes the post to lean and the leaf to drop. Straightening the iron without resetting the footing is a temporary fix at best. A proper repair means excavating the footing, re-pouring to grade, re-setting the post, and only then re-hanging the leaf. Range: $600 – $1,400. Call (469) 530-2485 for an inspection, and we’ll tell you honestly whether the post is the problem or the panel is.
It’s both, and it needs attention immediately. Under UL 325, an automatic gate must reverse when the safety photocell or edge sensor detects an obstruction. When those sensors fail, the gate becomes a crushing hazard. The repair usually involves re-wiring or replacing a failed photocell, loop detector, or edge sensor, and it typically costs $180 – $380. If you have a gate on a long private driveway in Beverly Hills, rodent damage or moisture in the buried conduit is often the root cause. Call us and we’ll get a tech out to test and replace the safety system properly.
Yes. Our technicians train on nine major gate-motor brands, including LiftMaster, FAAC, DoorKing, Linear, Viking, Ghost Controls, and BFT. Hillside Beverly Hills properties often run FAAC or DoorKing operators paired with battery backup or solar, and we carry the boards, limit switches, and safety components to service them on the truck. A gate operator replacement in Beverly Hills runs $1,100 – $2,800 depending on the motor and the hillside labor involved.
No, and we’d be suspicious of anyone who tells you they can. A proper automatic gate installation in Beverly Hills involves measured site work: groundworks and post footings, power runs, conduit, safety edges, photoelectric sensors, and reversal testing to UL 325. That’s measured, ordered, and scheduled. What we do promise is a free on-site measurement and a written price before anything is ordered, so you know exactly what the project costs and how long it will take before you commit.
It’s a gate repair, and it’s one we handle regularly. Gate intercoms, keypads, and loop detectors are low-voltage systems that integrate with the gate operator, and an electrician usually isn’t set up to diagnose a Viking or DoorKing control board. The problem could be a failed keypad, damaged conduit wiring, or a board that stopped responding. Our techs trace the circuit, replace the failed component, and re-test the whole entry system. Typical cost: $220 – $600. Call (469) 530-2485 and we’ll diagnose it over the phone if we can, then give you a written price on site.
We were called to a hillside property off Benedict Canyon where the slide gate had been dragging for months. The owner had already replaced the gate operator twice, but the real problem was a cracked concrete post footing that had settled and thrown the rack and pinion out of alignment. Our tech excavated the footing, re-poured it to grade, re-shimmed the rail, and re-set the LiftMaster travel limits and safety photocell. The gate has run clean ever since.
That’s the difference between treating the symptom and repairing the gate the way Bennett and Laurel Canyon terrain actually demands. Beverly Hills driveways, especially on hillside streets like Laurel Way, Benedict Canyon, and Angelo Drive, punish gate hardware that was never sized or set for the slope. We know that, and we repair accordingly.
If your gate is sagging, sticking, failing to reverse, or dead at the keypad, call (469) 530-2485 for a free estimate. A live person answers, day or night, and we’ll dispatch a uniformed, background-checked technician to your Beverly Hills property with a written price before any work starts.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Beverly Hills with background-checked technicians and written pricing under The Garrison Standard since 2008.