Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Grapevine, TX
When a gate stops opening in Grapevine, the problem is rarely the gate itself. It’s usually the motor working against Texas heat, a weld stressed by shifting clay soil, or a track thrown out of alignment after years of use. Carver Gate Repair works exclusively on gates and gate automation, and we run every Grapevine job to The Garrison Standard: a written price before work starts, a background-checked technician at the gate, and a one-year written guarantee on every repair. Call (469) 530-2485 and a live person answers, any hour, any day.
Why Grapevine Homes Are Different
Grapevine sits on expansive clay soil that shrinks in summer and swells after rain. That movement is hard on gate posts, hinges, and track beds. A gate that swings clean in March may hang low by August, not because the hinges bent but because the ground under the post shifted. When we set posts, we account for that; when we true a track gate, we check the pad and the soil around it before we touch the rollers.
The housing stock matters too. Older acreage properties east of Main Street and along Hall-Johnson Road tend to run heavier steel tube gates on welded hinge posts, while newer developments across the north side – around Dove Road and into the neighborhoods west of 114 – lean on aluminum drive gates with LiftMaster or BFT operators. Each setup fails differently, and diagnosing the failure correctly depends on knowing which style you’re standing in front of. Grapevine also enforces setback and visibility rules on driveway gates near intersections, so we keep an eye on placement before recommending an install.
Our Main Grapevine Services
Most Grapevine calls fall into two groups: a gate that won’t move, and a gate that never should have been installed the way it was. The three services below cover every gate on a Grapevine property, each with its own dedicated page.
Gate Repair in Grapevine
Grapevine’s climate punishes steel: UV breaks down powder coat, clay movement torques welds, and the wet-dry cycle rusts the bottom rail where sprinkler overspray hits it. Our Gate Repair in Grapevine work covers bent frames, sagging leaves, worn hinge pins, rotted post bases, and latch geometry that no longer lines up. We bring steel stock, welding gear, and replacement hardware on the truck so most fixes are done in one visit, with a written guarantee on the work for a full year.
Gate Installation in Grapevine
A new gate in Grapevine has to do three things: hold square through soil movement, carry the weight of a motor without racking, and meet any HOA or setback requirements before the concrete is poured. Our Gate Installation in Grapevine work starts with measuring the opening and checking the existing posts for plumb and depth. Grapevine summers and clay movement mean we won’t set posts in shallow concrete, and we won’t hang a steel frame on a post that should have been replaced fifty years ago.
Gate Motor Repair in Grapevine
The heat is the first thing we suspect with a dead operator. Grapevine afternoons push control boards and capacitor circuits harder than the manufacturer’s bench test ever did. On Gate Motor Repair in Grapevine calls we check limit switches, photo eyes, and loop detectors first – then power supply, then the board itself. We work on nine brands from the truck, so most Grapevine motor repairs are same-trip or next-day depending on parts.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Grapevine
Our techs carry parts for FAAC, BFT, Linear, and Viking systems, and we keep Grapevine-specific boards and limit-switch kits on the truck for the models most common here. That means fewer return trips waiting on a distributor. See our brands for the full nine-brand lineup.
Pricing for Gate Company in Grapevine, TX
| Service | Typical range in Grapevine |
|---|---|
| Service call diagnostic | $89 – $149, credited to the repair |
| Hinge or weld repair on steel gate | $180 – $400 |
| Track gate roller or v-wheel replacement | $150 – $350 |
| Swing gate leaf re-hang and latch alignment | $220 – $475 |
| Gate motor board replacement | $225 – $595 |
| Limit switch set and calibration | $120 – $250 |
| Photo eye or loop detector replacement | $175 – $395 |
| Battery backup install incl. wiring | $300 – $650 |
| Keypad or remote receiver replacement | $130 – $290 |
| Full gate operator replacement incl. labor | $750 – $2,800 |
Two things push a Grapevine quote to the upper end: deep concrete demo when an old post has to come out, and T-posts on slopes where the gate has to be stepped to follow grade. Whatever the number, we write it down before any work starts – and that written figure is the figure you pay.
Neighborhoods We Serve in Grapevine
We work all of Grapevine, from the older streets off Northwest Highway to the newer builds along Dove Road. Most Grapevine calls get a technician out within a 90-minute arrival window the same day, or first thing the next morning if you prefer to schedule around the heat.
- Heritage
- Kimball Ridge
- Pecan Park
- Timberline
- Woodlake Harvest
Service Area – Cities Near Grapevine
Pricing and response time are unchanged for the communities around Grapevine, and we route by the same Garrison Standard. Our Grapevine crews cover homeowners in Southlake, TX, Colleyville, TX, Euless, TX, and Coppell, TX. Dispatch and scheduling for the area run from the brand’s Dallas-Fort Worth office.
Serving Grapevine, TX – Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Grapevine
Yes. We dispatch to Grapevine at any hour, every day of the year, and the phone is answered by a live person – no voicemail queues. Most callers get a same-day visit, and emergency calls after hours get a technician, not a callback. Call (469) 530-2485 to confirm today’s dispatch window.
Repairing an existing gate almost never requires city approval. Replacing a gate with a same-size unit is typically fine too. If the work changes the gate’s location, height, or swing direction, Grapevine setback rules and your HOA’s design guidelines may apply – we can help sort that before you commit to an install.
Yes. We work every residential neighborhood across Grapevine, including Heritage, Kimball Ridge, and Timberline, plus the acreage properties east of Main Street. There is no travel upcharge or service-area difference – same crew, same written pricing, same one-year guarantee on every repair.
If a gate on your Grapevine property won’t open, won’t close, or hasn’t been right since it was installed, call Carver Gate Repair at (469) 530-2485. You’ll get a written quote before any work begins and a one-year guarantee on the repair, full stop.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.