Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Celina
Gate repair in Celina usually runs between $220 and $1,900 depending on whether you’re dealing with a hinge that’s pulled out of plumb or a full operator replacement. We dispatch crews to Celina from our DFW-area office, and most repairs start with a written price before any work begins. Our technicians know the Light Farms, Cross Creek Meadows, and Bluewood subdivisions, and they understand what blackland clay does to gate posts and operator pads over time. If your gate won’t open, sags on the hinge side, or stalls mid-cycle, call (469) 530-2485 and a live person answers, day or night.
Why Carver Gate Repair Is Celina’s Preferred Gate Repair Company
Lonnie Burke leads our Celina repair crews under The Garrison Standard: written prices, background-checked technicians, and a 365-Day Done Right Promise on every repair. When a Celina homeowner calls about a gate that won’t close, they get an arrival window they can plan around, not a four-hour gap. Our technicians arrive in uniform, put down a clean work area, and walk you through what failed before quoting the repair. The price you approve is the price you pay, and it’s in writing before we touch a tool.
We’re not a general handyman service that happens to do gates. Carver Gate Repair works exclusively on gates and gate automation, and every job carries a written guarantee covering a full year from the service date. If that repair fails inside the guarantee window, the second visit is free. No argument, no re-quote. Celina homeowners have told us that guarantee matters more than a lower bid, because they’ve already been through the no-show, re-quote cycle with other contractors.
Sliding Gate Repair in Celina
Sliding Gate Repair in Celina often comes down to one problem: a concrete pad that has settled and thrown the rack and pinion out of mesh. Our crew was called to a home in the Light Farms community where a LiftMaster slide gate operator had been straining and stalling for weeks. We found the concrete pad had settled and tipped just enough to throw the rack and pinion out of mesh, so the motor was fighting the gate every cycle; we re-set the post footing, shimmed the operator back to level, cleaned and re-adjusted the rack, and reset the limits. The gate has run smooth on every cycle since, and the homeowner told us they’d stopped bracing for the stall sound.
A typical sliding gate repair in Celina runs $280 to $850 when it involves limit switches, chain or rack adjustment, or a motor that has overheated from binding. Full operator replacement on a slide gate starts around $1,200 and includes the new motor, wiring check, and re-setting the travel limits and safety edges. If the pad or post has settled, re-leveling the operator is a separate line item that usually adds $350 to $600, including the shimming and re-anchoring work.
Rack and pinion drive correction
When a slide gate operator strains and stalls, the motor is almost always fighting a mechanical bind. The rack teeth may be misaligned, worn, or full of clay and debris. We clean the rack, check tooth engagement, and adjust the drive so the motor isn’t pulling against its own mount.
Operator pad re-leveling
Celina’s blackland clay expands and contracts with moisture, and concrete pads set on it tip over time. A tipped pad pulls the operator out of line with the rack. We re-level the pad, re-anchor the operator base, and verify the gate travels without bind before resetting the limits.
Wrought Iron Gate Repair in Celina
Wrought Iron Gate Repair in Celina is mostly hinge and post work rather than anything wrong with the iron itself. The gate leaves are heavy, and when a hinge post leans even a few degrees, the gate sags and drags on the latch side. Over time the hinges wallow out, the weld at the hinge barrel cracks, and the whole weight of the gate hangs on the top hinge. We re-set or replace the post, repair or replace the hinges, and re-align the gate so it swings free and latches square.
Expect to pay $220 to $550 for a typical hinge and realignment job on a wrought iron swing gate in Celina. If the post itself has moved and needs to be dug out and re-set in fresh concrete, that runs $500 to $900 depending on post size and how much concrete has to be removed. Weld repair on a cracked hinge or a broken picket adds roughly $85 to $150 per weld point. A full post replacement with new concrete and re-hanging the gate usually lands between $750 and $1,400.
Hinge post reset
Blackland clay pushes hinge posts off plumb. We dig out the old footing, re-set the post square, and pour fresh concrete with rebar ties. The gate gets hung back, leveled, and adjusted so the latch lines up without forcing it.
Weld and rust repair
Humidity and irrigation overspray work on raw weld points. We grind back rust, repair or replace cracked welds, and coat the repair so it matches the gate. A corroded hinge barrel on a heavy gate is a safety item, not just a cosmetic one.
Trusted Brands We Service in Celina
Our Celina technicians work on Linear, Viking, Ghost Controls, and DoorKing operators, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule. That matters because a Viking swing operator takes different limit logic and wiring than a Ghost Controls unit, and the last thing you want is a tech learning the difference on your gate. We stock common repair parts for these brands locally, which means a limit switch or a control board doesn’t have to sit on backorder while your gate stays open.
Common Gate Repair Problems We See in Celina Homes
- Settling posts and operator pads. Blackland clay moves with moisture, and posts set in it shift over time. A gate that was square last spring can bind or sag by fall.
- Photocells knocked out of alignment. Storms and irrigation runoff jostle safety photo eyes mounted near the base of the gate columns. The gate reverses or refuses to close even though the operator and panel test fine.
- Slide gate operators fighting a tipped pad. The motor overheats, the thermal overload trips, and the gate stalls mid-travel. Re-leveling the pad and re-meshing the rack fixes it for good.
- Worn hinge barrels on heavy iron gates. A heavy wrought iron gate on sagging hinges wallows out the hinge bore. The gate drops, drags, and eventually the weld cracks.
Pricing for Gate Repair in Celina, TX
Hinge and alignment work on a swing gate in Celina typically runs $220 to $550. Re-setting a post or operator pad runs $500 to $900. A slide gate rack and pinion correction runs $280 to $850. Full operator replacement starts around $1,200, and a complete new gate installation with posts, concrete, operator, and safety edges usually lands between $3,800 and $9,500 depending on the gate size and automation package. You get a written line-item price before any work starts, so the number doesn’t change when the job is open. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Celina
Our crews cover Celina plus Gate Repair in Prosper, Frisco, Melissa, and McKinney. If you’re on the edge of city limits or in a nearby subdivision, call and we’ll confirm dispatch coverage. You can also read more about our work across the area on our Gate Repair in Celina page.
Serving Celina, TX – Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Celina
The post is moving. In Celina, blackland clay expands and contracts with moisture, and a hinge post set in that soil will shift unless the footing is deep and properly tied. If a previous repair only shimmed the hinges or re-packed the post hole instead of re-pouring the footing, the post will move again within a season. The fix is to dig out the old footing, re-set the post plumb, and pour new concrete with rebar. That usually resolves the sagging for good. Call (469) 530-2485 and we’ll tell you whether your post can be braced or needs a full re-set.
Celina averages about 230 sunny days a year, which is enough for a solar gate opener on a single-family gate that cycles 10 to 15 times a day. The real constraint is panel placement and shade. A solar panel needs direct southern exposure, and any shade from a fence, tree, or the gate itself cuts output enough to undercharge the battery. We install solar operators with a battery bank sized for cloudy stretches, and we’ll tell you honestly if your gate location makes solar a poor fit. A hardwired or low-voltage option may cost less than adding a bigger panel and battery.
Test them every month. Walk across the gate path while it’s closing, and it should stop and reverse immediately. If it doesn’t, the photo eyes are misaligned, dirty, or wired wrong, and the gate is a hazard, especially with kids and pets. In Celina, irrigation spray and storm runoff knock photo cells out of alignment regularly, so a monthly test catches the problem before the gate fails to close or worse, fails to reverse. If the gate hesitates or creeps, the force setting may also need adjustment, which is part of a standard safety check.
Yes. We install keypad entry posts, wireless keypads, and loop detectors for automatic opening when a vehicle pulls up to the gate. A loop detector is wired into the operator and buried under the drive surface, so the gate opens for any vehicle without a remote or code. For guests and deliveries, we can add a keypad code you change as needed. A typical add-on keypad with wiring runs $180 to $350, and a loop detector with saw cutting and wiring runs $500 to $900. Call (469) 530-2485 and we’ll quote your gate’s exact setup.
Most full gate installations in Celina take one to two days of on-site work, but the total timeline includes concrete cure time and any HOA or city permitting. You’re looking at roughly one to four weeks from approved quote to a gate that opens and closes on automation, depending on gate fabrication and weather. We never promise same-day installation; a proper job includes groundworks, power run, safety edges, and reversal testing, and that is measured work. The price is written before any work starts, and the schedule is set at quote, not changed at the door.
Call Carver Gate Repair in Celina
If your gate won’t close, sags on the hinge, or stalls on the slide track, call (469) 530-2485. A live person answers, we schedule a time that works, and you get a written price before any work begins. Lonnie Burke and our Celina crew work to The Garrison Standard: background-checked technicians, a written guarantee on every repair, and a full year to hold us to it.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Celina with The Garrison Standard.