Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Concord
Gate repair in Concord means dealing with what the soil does to your posts before you touch the panel. Most gate failures we see here start underground, where expansive clay shifts footings and pulls hinges out of true. If your gate is sagging, dragging, or binding, call (469) 530-2485 and we’ll dispatch a background-checked technician to your Concord property, often the same day for repairs. Written price first, full-year guarantee in hand, and a crew that leaves the site clean enough to forget we were there.
Why Carver Gate Repair Is Concord’s Preferred Gate Repair Company
Concord homeowners have dealt with plenty of contractors who quote one number and invoice another. The Garrison Standard exists to end that pattern. Every repair starts with a written price, agreed before any work begins. If the repair fails inside a full year, we come back and fix it without charging you a second visit. That is not a goodwill gesture; it is in writing on every ticket.
Lonnie Burke, owner at Carver Gate Repair, runs the crew to that standard across every Concord dispatch. Our technicians arrive uniformed and background-checked, and phones are answered by a live person around the clock, including weekends and holidays. When a gate motor burns out off Treat Boulevard or a weld cracks near Clayton Road, you’re not leaving a voicemail and hoping for Monday.
We work on nine gate motor brands, including Viking, DoorKing, and Elite, and stock the common parts Concord jobs actually need. That means less waiting on a distributor and more gates repaired the day we arrive.
Driveway Gate Repair in Concord
Driveway gate repair in Concord usually starts at the post, not the panel. A typical hinge repair or realignment here runs $225 to $450, and a full operator replacement on a swing gate lands between $800 and $2,400 depending on the motor and whether the post needs re-setting. The number is written down before we touch a tool.
If your gate drags on the concrete every summer, the panel is often fine. Concord’s clay soil heaves, the hinge post shifts, and the gate leans until it catches the driveway. We fix it by pulling the post, pouring a deeper footing, re-setting it plumb, and hanging the gate back in line. Then we test the operator so the new alignment does not kill the motor.
Realigning a Sagging Gate
Realignment is the most common driveway repair we perform across Concord, from the older lots north of Highway 4 to the newer builds near Sun Terrace. We corrected a double swing gate off Treat Boulevard that looked straight but dragged every July. The hinge post had heaved out of its footing. We pulled it, poured deeper concrete, re-set the post plumb, and then replaced the tired LiftMaster operator that had been fighting the misalignment for years.
Replacing a Gate Operator
When the motor fails, we match the new operator to the system you already have: Viking, DoorKing, Elite, and six other brands. The replacement includes limit-switch setup, force adjustment, and a safety-edge test. We bill a written price before the work starts, and the one-year guarantee covers the new operator and our labor.
Gate Welding in Concord
Gate welding in Concord typically costs $180 to $650, depending on whether we are repairing a cracked frame, replacing a rusted hinge plate, or rebuilding a post mount. Welding is often the cheaper fix when the structure is sound and the damage is localized. We tell you if it is not worth welding.
Rust is a real factor here. Morning fog off the Carquinez Strait keeps steel damp longer than people expect, and welds are usually the first place corrosion shows. A crack that starts at a hinge weld spreads under the weight of the panel, and a welded repair done properly restores the frame without changing the look.
Cracked Frame Repairs
A cracked frame rarely means the gate is finished. We grind the crack, weld it closed, and fishplate the back side where the load concentrates. Most repairs can be done in place, without removing the gate from its hinges. The price is quoted one time, before the welder lights a torch.
Hinge and Post Mount Welding
When a hinge plate tears loose, welding a new plate is usually faster and stronger than bolt-on repairs. We also weld replacement post caps for slide gates where the rack sits. The work is reinforced to withstand Concord’s clay soil movement, not just patched for appearance.
Trusted Brands We Service in Concord
Our technicians are trained on Viking, Ghost Controls, DoorKing, Elite, and other major operators, so we match the repair to the system already installed. We keep replacement boards, limit switches, and safety edges for the brands Concord installers prefer, which shortens turnaround. If your openers were installed by the builder, we can identify the model and get the right parts on the first trip. You will not pay for a second trip because someone guessed wrong.
Common Gate Repair Problems We See in Concord Homes
- Post heave from expansive clay: Concord’s soil swells in winter and shrinks hard in summer, shoving shallow footings out of true. A gate that sags every August usually has a footing problem, not a bad panel.
- Binding slide gates: When the post footing settles unevenly, the rack and pinion no longer run true. The operator strains, draws more current, and eventually burns out the motor.
- Unrepaired safety sensors: Photocells and edge sensors fail without a warning light. If the gate does not reverse when tested, it is not UL 325 compliant, and that is a liability on any automatic gate in Concord.
- Corroded hinge welds: Fog and winter rain keep steel damp, and weld points carry the load. We repair hinge welds before the panel drops and takes the operator with it.
Pricing for Gate Repair in Concord, CA
Gate repair in Concord runs from about $180 for a basic welded crack to $2,400 for a complete swing-operator replacement on a heavy gate. Hinge replacement and realignment fall between $225 and $450. Rack replacement on a slide gate is $350 to $700. Operator replacement, including a Viking, DoorKing, or Elite motor, starts around $800 and depends on the gate’s weight and whether we need to re-set the post. Every quote is written before work starts, and the number does not move at the door. Call (469) 530-2485 for a free estimate, and we’ll tell you what the repair should cost for your specific gate.
We Also Serve Cities Near Concord
Our Gate Repair in Concord coverage extends to the surrounding communities we regularly work in: Pleasant Hill, Walnut Creek, Lafayette, and Martinez. If your property sits in one of these cities, our Gate Repair team brings the same written prices and one-year guarantee.
Serving Concord, CA – Our Local Coverage Area
We’re based in the Concord area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Concord
Because the hinge post is moving in the clay soil. Concord’s expansive soil swells with winter rain and shrinks in the dry season, and a shallow footing cannot hold the post true. The fix is pulling the post, pouring a deeper footing, and re-setting it plumb, not adjusting the panel. Call (469) 530-2485 and we’ll confirm whether the post is the culprit with one look at the hinge gap.
No, and we will not pretend otherwise. Installation is measured, ordered, and scheduled. A new gate requires groundworks, power run, operator mounting, and safety-edge calibration, and that takes proper time. We give a free measure and a written price, then schedule a date we keep. Repairs, on the other hand, are often done the day you call.
We repair operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We stock common parts for the brands most often installed in Concord so the first repair trip is usually the last one. Tell us the model from the motor housing, or we’ll identify it on site.
Test the reversal at least once a season. Place an object like a trash can in the gate’s path and see if it stops and reverses on contact. Also verify the photocell works by blocking the beam. If either fails, have a trained technician address it, because UL 325 entrapment standards exist to prevent a gate from pinning a person or pet. This is a safety system, not a convenience feature.
Yes, if the steel is structurally sound, welding is usually the right and cheaper fix. A cracked frame repair in Concord typically runs $180 to $430, while a full gate replacement starts well over $1,000. We’ll tell you honestly if the corrosion is too far gone to weld safely, and the price is written before any sparks fly. Call (469) 530-2485 for a free quote on your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Concord and surrounding East Bay communities since 2008.