Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Culver City
A broken gate in Culver City rarely fixes itself, and waiting a week for a technician who may or may not show up is not how you want to spend your weekend. Gate repair in Culver City typically runs $180 to $450 for hinge, post, and alignment work, while motor and operator replacements start around $650 and can reach $1,900 depending on the system. We dispatch background-checked, uniformed technicians to Culver City every day, and our phones are answered by a live person around the clock. Call (469) 530-2485 for a written price before any work starts.
Whether you live on a hillside street off Overland Avenue, in Carlson Park, or near the downtown stretch of Culver Boulevard, we know what your gate is up against. The marine layer that rolls in off the coast does more than cool the evening air. It deposits salt and moisture on exposed gate hardware, and that grime works its way into hinges, rack and pinion drives, and low-voltage wiring. Culver City’s older residential blocks carry another complication: original concrete hinge posts from the 1920s and 1930s that have shifted, cracked, or deteriorated over decades. A sagging gate here is rarely just a hinge problem. It is usually a footing problem wearing a hinge’s clothes.
Our Gate Repair team handles the full scope: electric gate repair, automatic gate repair, hinge and post repair, gate realignment, lock repair, and weld and rust repair. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Every repair carries a written guarantee, good for a full year from the date of service, and if the repair fails inside that window, the second visit is free.
Why Carver Gate Repair Is Culver City’s Preferred Gate Repair Company
Culver City homeowners call us because the basics matter. Our technicians show up when they say they will, in a marked vehicle, in uniform, with a background check already on file. The work is quoted before it starts, in writing, so the number does not move once the job is open. The Garrison Standard, which we have operated under since 2008 as part of the Garrison Partners family, sets the floor for how every service call runs.
Lonnie Burke leads the crew, and he has spent enough years on gate systems to know that most “operator failures” in this city are actually wiring, alignment, or footing problems that a parts-replacer will never find. That focus on diagnosis is what separates a real gate specialist from a generalist who replaces the most expensive component first and hopes for the best. Our reviews from Culver City customers consistently mention the same things: the tech showed up, explained the failure in plain language, and left the site clean.
When a gate fails in Culver City, response time matters. We are already working in the area most weekdays, and our live-person dispatch can route a technician to you without a callback queue or a voicemail box. The phone at (469) 530-2485 is answered by a human being, 24 hours a day, seven days a week, including weekends and holidays.
Commercial Gate Repair in Culver City
Commercial Gate Repair in Culver City covers a different set of problems than the typical single-family home. Multi-unit properties along Washington Boulevard, office complexes near the 405, and apartment buildings in the Fox Hills area run gates on far more cycles than any residential driveway. Slide operators, loop detectors, keypads, and intercom wiring all take a beating, and when a commercial gate goes down, deliveries stall, tenants get frustrated, and everyone suddenly has an opinion. Repairs typically run $400 to $1,500 depending on the operator, access control integration, and whether the gate itself needs structural work.
High-Cycle Slide Gate Systems
Commercial slide gates in Culver City run on loops, limit switches, and rack and pinion drives that most residential technicians never see. We service DoorKing and Viking slide operators regularly, and the most common call is a gate that stops or reverses mid-travel due to loop detector ghosting or rack misalignment. The marine layer adds rust and grit to the rack surfaces, which compounds wear. We inspect the full drive path, not just the control board.
Access Control and Intercom Integration
When a keypad dies on a Culver City commercial property, the operator is often fine. Low-voltage wiring run in unsealed conduit collects moisture, and that corrosion mimics a dead control board. We test the circuit before replacing parts, and we wire keypads, intercoms, and loop detectors so they survive the coastal air. Every commercial repair includes a written quote before work begins and the same one-year guarantee as residential work.
Iron Gate Repair in Culver City
Iron Gate Repair in Culver City usually begins at the hinge post, not the gate itself. The city’s oldest residential neighborhoods, from Veteran’s Park down toward the Helms District, hold iron gates hung on concrete posts poured before the area was even incorporated. Those posts crack, settle, and lean over time, and every repair that re-hangs the panel without fixing the footing buys a few months at best. Iron gate repair here typically runs $250 to $800, including weld repair, rust treatment, hinge replacement, and realignment.
Post Footing and Hinge Restoration
When an iron gate drags on the driveway or swings shut on its own, the hinge is almost never the whole story. We reset and shim posts, replace cracked footings where possible, and re-level the gate so the operator is not fighting a losing battle against gravity. The goal is a gate that swings true on its own, before any motor touches it.
Weld Repair and Corrosion Control
Wrought iron and steel gates within a few miles of the coast collect salt air corrosion faster than inland properties. We grind out rust, weld cracks and separated joints, and re-coat the repaired sections so the repair lasts beyond the next marine-layer season. On older Culver City gates, we often find that the bottom rail has rusted through from decades of irrigation splash, and that structural work has to come before the panel is hung.
Trusted Brands We Service in Culver City
We repair and service Linear, Viking, Ghost Controls, and DoorKing equipment, along with LiftMaster, FAAC, BFT, Elite, and Mighty Mule systems. That breadth matters in Culver City because so many properties carry a mix of older operator models and newer add-on equipment. Our technicians keep common parts for these brands stocked on service vehicles serving Culver City, which means fewer return trips and shorter repair windows. If the system in your driveway is a DoorKing slide operator from a previous owner or a Linear swing arm that has gone quiet, we can match the right parts and the right programming to what is already installed.
Common Gate Repair Problems We See in Culver City Homes
- Sagging swing gates on original concrete posts. Culver City’s 1920s-era lots often have iron gates hung on the original poured posts, and those posts shift over time. The gate gets re-hung, looks fine for a few months, then sags again because no one fixed the footing. We correct the post first, then the panel.
- Slide gate operators reversing mid-travel. Short driveways on lots around Sunkist Park and Blanco Park often have slide gates with loop detectors that ghost, or rack and pinion tracks that fill with marine-layer grit. The operator trips its safety system and reverses, and it looks like a motor failure when it is not.
- Missing or miswired entrapment protection. Owner-installed operators on newer Culver City builds frequently lack functioning photo-eyes or edge sensors. The gate fails UL 325 reversal testing, which is a legitimate safety problem, and we correct it on nearly every repair visit where the operator was self-installed.
- Dead keypads with live operators. Multi-unit properties in Culver City run keypad and intercom wiring through unsealed conduit, and moisture intrusion shorts the low-voltage circuit. The keypad looks dead, the operator is fine, and the actual fix is rewiring, not replacement.
Pricing for Gate Repair in Culver City, CA
Gate repair in Culver City runs on a few clear ranges. Hinge, post, and alignment repairs typically land between $180 and $450. Weld and rust repair on iron gates starts around $250 and can reach $800 when structural sections need replacement. Operator and motor repairs range from $350 to $1,200 depending on the brand and failure point, and full operator replacements run $650 to $1,900 installed. What moves the number is the condition of the post footing, the operator model, and whether entrapment protection needs to be added or rewired. Every job receives a written price before work begins, and that price does not change at the door. Estimate calls are free. Call (469) 530-2485 for an exact quote on your gate.
We Also Serve Cities Near Culver City
Our crews handle gate repair across the Westside, from Gate Repair in Culver City to Marina del Rey, Inglewood, El Segundo, and Beverly Hills. If you are near the border of any of these cities, we can still get a technician out to you. Call and tell us the gate type and symptom, and we will schedule accordingly.
Serving Culver City, CA – Our Local Coverage Area
We’re based in the Culver City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Culver City
We almost always fix the post first. On Culver City’s older lots, the original concrete hinge post has shifted or cracked, and that misalignment is why the gate drags. Re-hanging the panel without correcting the footing means the sag returns in months. We reset or shim the post, re-level the gate, then tune the operator limits. Call (469) 530-2485 for a written quote on the full repair.
Yes. Gate operators must comply with UL 325 entrapment protection standards, which means functioning photo-eyes, edge sensors, and proper reversal testing. Many owner-installed operators in Culver City have miswired or missing photo-eyes, and we correct that on nearly every repair visit. The safety side is not optional, and we verify it before leaving any job.
The usual causes are loop detector ghosting, rack and pinion misalignment, or marine-layer grit binding in the track. Short driveway slide gates are sensitive to false loop signals, and the operator reverses because it thinks something is in the path. We diagnose the loop, clean and align the rack, and reset the limit settings. Call (469) 530-2485 for a diagnostic visit.
We repair LiftMaster and DoorKing operators regularly, and most failures are repairable: bad limit switches, damaged loop wires, failed capacitors, or misaligned safety sensors. Replacement is only suggested when the control board is fried beyond cost-effective repair or the motor windings have failed. We tell you which one applies and quote the repair in writing before any work starts.
Yes, for emergency repair calls. We keep technicians in the Culver City area on most weekdays, and our live-person dispatch can often route one same-day. If the gate is stuck open or closed, call (469) 530-2485 and describe the symptom. We will give you a straight answer on timing and a written price before the work begins.
Call Carver Gate Repair in Culver City
We were called to a property off Culver Boulevard near downtown Culver City where a swing gate would stop mid-travel and reverse. The homeowner had already replaced the LiftMaster operator, but the gate still dragged. Our tech found the original concrete hinge post had cracked and shifted, so we reset the post footing and shimmed the hinge, then re-leveled the gate and re-tuned the operator’s limit and soft-stop settings. The gate now runs clean on every cycle, and we verified the safety photocell and edge sensor were working before we left.
That is the kind of repair this city’s gates need, and it is the work we do every week. The phone number is (469) 530-2485. A live person answers, day or night. Tell us what the gate is doing, and we will get a background-checked, uniformed technician to your Culver City property with a written price before any work begins. Every repair carries a one-year written guarantee, and if the repair fails inside that window, we return free.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Culver City with written prices, background-checked technicians, and a full-year guarantee on every repair.