Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Dublin
Gate repair in Dublin typically runs $180 to $340 for common fixes like sag correction, hinge replacement, or limit switch adjustment. Most jobs are done the same day we arrive, with the written price agreed before work starts. We know Dublin’s neighborhoods, from the graded driveways in Dublin Ranch to the older lots near West Dublin, and we dispatch our Gate Repair crew directly into town. If your gate is stuck, sagging, or refusing to open, call (469) 530-2485 and a live person will pick up.
Why Carver Gate Repair Is Dublin’s Preferred Gate Repair Company
Carver Gate Repair has built its reputation in Dublin on a simple process: a background-checked, uniformed technician arrives with a written price in hand before any work begins. Dublin homeowners have told us the same story for years, a quote that grows once the job is open. That doesn’t happen here. The price we put in writing is the price you pay, and every repair carries a written guarantee good for a full year.
Response time to Dublin is a core part of the service. Our scheduling is coordinated from the San Francisco Bay Area office, which means a Dublin call doesn’t sit in a voicemail queue. A real person answers 24/7, including weekends and holidays. For gate failures that leave a driveway exposed or a car trapped, that matters. Our Dublin customers consistently tell us the two things they value most are showing up when we say we will and not moving the number at the door. We hold to both under The Garrison Standard, the operating code every Carver location has followed since 2008.
Lonnie Burke leads our crew, and the standard he enforces is the same one written into every job ticket: leave the site clean, test the repair under real load, and stand behind the work for a full year.
Metal Gate Repair in Dublin
Metal Gate Repair in Dublin almost always comes down to one of three problems: sagging hinges, a shifted post, or an operator fighting a grade. Dublin’s driveways frequently slope up from the street to the garage, which means a metal gate’s hinge posts carry more load than they would on a flat lot. A gate that sags two inches may look like a panel problem, but the failure is usually in the footing. We fix the post first, then the panel.
Hinge, Post, and Realignment Work
A steel or wrought-iron gate in Dublin that drags across the driveway or no longer latches usually has a hinge post that’s moved. We dig out the old footing, set the post with new concrete to the correct depth, and re-hang the gate so it swings true. Welding cracked hinge barrels or replacing bent brackets is standard on these calls. Typical cost for post reset and re-hang in Dublin: $320 to $580, depending on post size and whether the old concrete has to be cut out.
Rust and Weld Repair
Dublin’s summer heat and the dust that blows off the hills will accelerate rust on exposed steel gates, especially near the bottom rail where sprinkler overspray sits. We cut out rusted sections, weld in new steel, grind the seams flush, and prime the repair. A small rust patch weld runs $180 to $260. A full bottom-rail replacement on a double gate starts around $400.
Wood Gate Repair in Dublin
Wood Gate Repair in Dublin usually means correcting a frame that has pulled apart at the joints or replacing rotted members before the whole panel fails. Wood gates weigh more than steel ones of the same size once they pick up moisture, and on Dublin’s sloped approaches that weight works against the hinges. A fence-style wood gate that rubs the concrete or won’t close flat has likely twisted at the frame, not just settled. We rebuild the frame square and re-hang it on hinges rated for the actual weight.
Frame, Hinge, and Panel Correction
Most wood gate failures in Dublin start at the hinge side. The lag bolts that came with a builder-grade gate pull out of the stile, the panel drops, and the latch misses the post. We replace the hinges with through-bolted strap or T-hinges, add a diagonal brace if the frame was built without one, and re-set the latch post if it has pushed over. Expect to pay $220 to $390 for a standard single wood gate repair, including hardware.
Rot and Post Replacement
Dublin’s winter rain, especially in older neighborhoods around Silvergate and the 94568 area, will find its way into untreated end grain. Once rot takes hold in a post or bottom rail, the fix is replacement, not patching. We set new pressure-treated posts three feet deep with concrete, then rebuild the affected rail or stile. A gate post replacement in Dublin runs $280 to $480. A full wood gate rebuild into a solid post starts around $600.
Trusted Brands We Service in Dublin
Our technicians work on the gate operator brands already installed across Dublin’s homes, including Linear, Viking, Ghost Controls, and DoorKing. We stock the common replacement parts for these systems, which means a worn limit switch or a failed control board doesn’t wait on a week of shipping. Whether it’s a Viking swing operator on a Dublin Ranch driveway or a Ghost Controls slide motor near Positano, the parts and the know-how arrive together. For any operator we service, we verify it against the UL 325 safety standard before we call the job finished.
Common Gate Repair Problems We See in Dublin Homes
- Graded driveway post shift. Dublin’s up-sloping driveways put constant downhill pressure on hinge posts. The post leans, the gate sags, and re-hanging the panel without fixing the footing means the same repair call again in six months.
- Heat-driven operator faults. Summer heat plus dust on exposed rack and pinion slide gates will stiffen travel. The operator reads the added resistance as an obstruction and throws a current-limit fault mid-travel.
- Builder-grade key switches and loop detectors. Original equipment key switches and loop detector housings loosen over time. A wiggled-out seal lets moisture into the loop circuit, causing phantom open-and-close cycles that no one can find until the detector is tested.
- Wood frame twist on sprinkler-fed rot. Sprinkler overspray on the hinge side of a wood gate softens the stile, the lag bolts lose purchase, and the whole panel racks. By the time the gate won’t latch, the frame needs rebuild work, not a hardware swap.
Pricing for Gate Repair in Dublin, CA
Most Dublin gate repairs fall between $180 and $580. A hinge re-tighten with latch adjustment runs $180 to $240. Post reset work, the most common fix on graded driveways, lands at $320 to $580 depending on post size and access. Operator repairs like limit switch replacement or loop detector service fall between $240 and $420. Full operator replacement, when the motor itself has failed, runs $680 to $1,300 installed. Every estimate is written and quoted before work starts, and the number will not move. Call (469) 530-2485 for a free estimate on your specific gate.
We Also Serve Cities Near Dublin
Carver Gate Repair handles gate work throughout the Tri-Valley and East Bay. In addition to Dublin, we regularly serve Hayward, San Ramon, Pleasanton, and Danville. If you’re just outside Dublin, call (469) 530-2485 and we’ll confirm our next available dispatch window for your area.
Serving Dublin, CA – Our Local Coverage Area
We’re based in the Dublin area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Dublin
The hinge post has likely shifted, not the panel. On Dublin’s graded driveways, the post footing carries more downhill load than it does on flat lots, and once it moves a few degrees the whole gate drops. Fixing the post means removing the old footing, re-setting the post in concrete at the correct depth, and only then re-hanging the panel. A panel-only fix will fail again because the load path hasn’t changed. Call (469) 530-2485 and we’ll put eyes on the post before quoting you a number.
Yes, for most repair calls. Our Dublin dispatch typically has a technician on site within 24 hours, and common failures like a stuck operator, a popped hinge, or a latch that won’t catch are usually fixed the same day. Emergency calls where a gate is stuck open or a car is trapped inside get priority. Installation and full post replacement work is scheduled, not dispatched same-day.
Ask for a full UL 325 compliance test. That means the operator’s reversal system and safety photocells are tested under load, the force settings are measured, and the results are documented. Every automatic gate we service in Dublin gets this test before we leave. If a repair changes travel, speed, or the safety edges, the test has to be re-run, not assumed.
We service Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. The right repair depends on the system already installed, not on a preferred brand we’re trying to sell. Our techs carry the common parts for these systems in the van, which shortens turnaround on Dublin calls.
Yes. We do full metal gate repair, including weld work, post resets, and realignment, and wood gate repair including frame rebuilds, hinge replacement, and post setting. A gate is a structural system, not just a panel, and the repair has to address the load path, not just the visible symptom.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Dublin and the Tri-Valley under The Garrison Standard.
For a free estimate on gate repair in Dublin, CA, call (469) 530-2485. A live person answers around the clock. The price is written before work starts, and the repair is guaranteed for a full year.