Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across East Los Angeles
Gate repair in East Los Angeles usually comes down to one of three things: a sagging gate that drags on the driveway, an operator that quit responding, or a commercial gate stuck open on a busy street. Most repairs run $180 to $650 for hinge, post, wheel, and alignment work, while operator and control board replacements typically land between $450 and $1,100. We dispatch background-checked, uniformed technicians to East Los Angeles neighborhoods from our Los Angeles office, and a live person answers our phones around the clock. Call (469) 530-2485 and you’ll get a written price before any work starts.
We’re Gate Repair specialists, not general contractors. That focus matters when a gate post has rusted through at the footing or a control board is throwing phantom codes. Lonnie Burke leads the Carver crew, and every job carries the same written guarantee: if a repair fails inside a full year, we come back and fix it at no charge.
East Los Angeles has its own set of gate problems, and we’ll get into those below. But the short version is this: we know the difference between a gate that needs adjustment and a post that needs to be reset in concrete, and we won’t sell you the wrong one.
Why Carver Gate Repair Is East Los Angeles’s Preferred Gate Repair Company
Homeowners and property managers in East Los Angeles call us because we answer the phone and we show up when we say we will. No voicemail queues, no four-hour arrival windows. A live person takes your call 24 hours a day, including weekends and holidays. When a gate fails on a Saturday night and your driveway is the only way in, that matters.
Every technician we send to East Los Angeles is background-checked, uniformed, and trained on nine major gate-motor brands. You’ll know who’s walking up your driveway before they ring the bell. And the price we quote before work begins is the price on the invoice. That’s The Garrison Standard, and it’s been in effect since 2008 across the Garrison Partners family, including East Los Angeles service calls.
Our 365-Day Done Right Promise is in writing on every repair. If the same repair fails inside that year, we return and make it right. No charge, no argument. That guarantee is what keeps our East Los Angeles customers calling us back when a different gate eventually needs attention.
We also understand the specific conditions out here. Gate work in East Los Angeles isn’t one-size-fits-all. An older home off Atlantic Boulevard has different hinge and post conditions than a commercial frontage on Whittier Boulevard, and we approach each job accordingly.
Commercial Gate Repair in East Los Angeles
Commercial Gate Repair in East Los Angeles often means dealing with a gate that has to work, every single time, because it controls vehicle access to a property that’s open for business. We repair slide gates, swing gates, and operators on commercial frontages throughout the area, including lots and storefronts along Whittier Boulevard, Atlantic Boulevard, and 3rd Street. A commercial gate that won’t close is a liability. A gate that won’t open is a lost day of revenue.
Commercial repair work in East Los Angeles typically runs $350 to $1,400, depending on whether we’re replacing a control board, realigning a slide track, rebuilding a post, or swapping out a failed operator. Written pricing is standard on every commercial job, so building owners and managers know the number before we open a panel.
Whittier Boulevard Frontage Work
Whittier Boulevard is its own animal. Parking strips and sidewalk easements along the corridor sit on county-controlled right-of-way, which means gate posts set near the sidewalk can be subject to a different review clock for any footing work than a job one block north inside Los Angeles city limits. We’ve handled enough of these to know when a post replacement needs paperwork and when it doesn’t, and we’ll tell you straight either way.
The other thing we see on Whittier commercial gates is misaligned safety photocells and loop detectors. Delivery trucks, street sweeping equipment, and wet-season ground movement all take their toll. A gate that reverses for no reason or stays open past its timer is usually a photocell or loop issue, not a failed operator. We diagnose it correctly the first time.
Operator and Control Board Replacement
Most commercial gate failures trace back to the operator, not the gate itself. When the gate is intact but won’t budge, we’re usually looking at a burnt control board, a dead battery, or a limit switch that’s lost its setting. We stock parts for FAAC, LiftMaster, and Linear commercial operators, so we can often complete the repair in one visit rather than ordering a board and coming back a week later.
A commercial operator replacement in East Los Angeles generally runs $800 to $1,400 installed, including testing of safety edges and reversal function before we leave. We don’t declare a job done until the gate opens, closes, and reverses correctly under load.
Iron Gate Repair in East Los Angeles
Iron Gate Repair in East Los Angeles usually means one of two things: the gate still looks fine but it’s sagging, or rust has gotten into the structure. Older iron gates on single-family driveways throughout the area take a beating from sun, smog, and the occasional fender bump. We handle hinge replacement, post resetting, weld repair, rust treatment, and full realignment.
Typical iron gate repair work in East Los Angeles runs $220 to $600 for hinge and alignment jobs. If the post itself is rotted at the base or cracked at the footing, expect $400 to $800 to dig out and reset it, depending on access and concrete work involved.
Sagging Gates and Dragging Corners
When an iron gate sags and drags on the driveway apron, homeowners often assume the gate panel itself is bent. More often, the culprit is a hinge post that’s begun to lean or a hinge that’s worn oval. On a block off East 1st Street near the County line, we took a peeling iron swing gate that had dropped and was scraping its driveway apron. The real culprit wasn’t the panel or its rack and pinion but a rusted-through hinge post footing. We reset the post, re-leveled the gate, and dialed in the LiftMaster operator with fresh safety photocells and a reversal test before we called it done.
That’s the difference between patching a symptom and fixing the failure. We always check the post and footing before we shim a hinge, because a shimmed gate just sags again in six months.
Weld and Rust Repair
East Los Angeles iron gates sit in direct sun most of the year, and coastal moisture isn’t as much of a factor here as heat, UV, and the occasional heavy rain that sends water down behind stucco and into post pockets. Where paint has flaked, rust follows. We grind, weld, prime, and paint rust-damaged sections as part of the repair, not as an afterthought. A repaired gate should look like it belongs on a maintained property, not like it got a patch job.
Weld repairs on iron gates in East Los Angeles typically run $150 to $450, depending on the length of the crack and how much prep the area needs.
Trusted Brands We Service in East Los Angeles
We repair and install gate equipment from FAAC, BFT, Linear, and other major manufacturers. Because we stock common control boards, remotes, capacitors, and safety components locally, most East Los Angeles repairs don’t wait on a shipped part. If your operator is a FAAC swing unit, a BFT slide unit, or an older Linear setup, our technicians have worked on that exact hardware before. We match the parts to the system already installed rather than selling you a whole new operator because we don’t carry the right board. That’s the difference a gate-focused company brings to East Los Angeles.
Common Gate Repair Problems We See in East Los Angeles Homes
- Hinge post sag on older single-family driveways. Years of daily cycles tear up aging hinge posts and post footings, so the gate sags and drags long before the operator ever faults out. The fix is resetting the post, not just cranking the hinge bolts tighter.
- Operator board and battery failures. Aging slide and swing operators fail on the board or the battery, leaving a fully intact gate that simply won’t move. LiftMaster and FAAC control boards are the usual suspects we pull in East Los Angeles.
- Phantom reverses and stuck-open gates on commercial frontages. Parking-strip and easement positioning on Whittier Boulevard commercial frontages lets vehicles and wet-season ground movement knock safety photocells and loop detectors out of alignment. The gate works intermittently or reverses for no visible reason.
- Rust-through at the post base. Iron gates along East Los Angeles driveways collect water at the footing, especially where concrete meets steel. By the time the gate drags, the post is often rusted through below grade level. Surface patching won’t hold.
Pricing for Gate Repair in East Los Angeles, CA
We believe in giving you real numbers, not vague estimates that grow once the work starts. Here’s what gate repair typically costs in East Los Angeles:
- Hinge replacement and gate realignment: $220 – $450
- Post resetting with new concrete: $400 – $800
- Weld and rust repair: $150 – $450 per section
- Operator control board replacement: $400 – $800
- Full operator replacement (residential): $800 – $1,400
- Commercial slide or swing operator replacement: $900 – $1,600
Every price is written down and agreed to before we touch a tool. If the repair needs more than we quoted, we stop and tell you before doing the extra work. You are never on the hook for an amount you didn’t approve. Call (469) 530-2485 for a free estimate, and we’ll give you a straight number.
We Also Serve Cities Near East Los Angeles
Carver Gate Repair serves the full metro area. While this page focuses on East Los Angeles, our technicians regularly handle gate work in Gate Repair in East Los Angeles plus Los Angeles, San Diego, San Jose, and San Francisco. If your property sits near the county line or just outside our core East Los Angeles zone, call us and we’ll tell you straight whether we can get a technician out to you.
Serving East Los Angeles, CA – Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in East Los Angeles
Nine times out of ten, it’s the post or the hinges, not the panel. Hinge posts on older East Los Angeles driveways corrode at the base where concrete meets steel, and the post leans just enough that the gate drags. We check the post and footing before we adjust or replace anything. If the panel is truly bent or cracked, we’ll tell you that too, but most of the time the panel is fine and the foundation underneath it is the problem.
Your gate should have functioning safety photocells or safety edges, and it should reverse when it encounters resistance while closing. In East Los Angeles, commercial gates along busy corridors like Whittier Boulevard are especially prone to knocked-out alignment, which disables the safety function without any visible damage. We test reversal pressure and photocell alignment on every automatic gate repair we do, and we won’t hand a gate back to you if it can’t pass a reversal test. That’s part of every written quote and every repair, not an add-on. Call (469) 530-2485 to schedule a safety inspection.
Yes. We replace control boards, limit switches, capacitors, remotes, and batteries on existing operators all the time. A dead board doesn’t mean a dead operator. We stock parts for FAAC, BFT, Linear, LiftMaster, and other brands, so we can often repair an operator in East Los Angeles the same day we diagnose it, without waiting on a shipped component. If the operator is genuinely beyond repair, we’ll show you the failed part and give you a written replacement price before we do anything.
Yes, we do regular commercial work along Whittier Boulevard and the surrounding commercial corridors in East Los Angeles. We understand the county easement and right-of-way issues that affect gate posts and footings near the sidewalk, and we know when a footing job needs county review and when it doesn’t. Commercial gate repair along Whittier usually involves slide or swing operators, safety photocells, and loop detectors, and pricing runs $350 to $1,400 depending on the scope of the repair.
No, and we won’t pretend otherwise. A proper gate or operator installation takes measured work: footing inspection or new concrete, power run, mounting, safety edge wiring, and full reversal testing. In East Los Angeles, that’s typically a scheduled job with a written price and a defined timeline. What we can do same day is diagnose the failure and, in most cases, repair an existing gate or operator. If you need a new installation, call (469) 530-2485 for a free measure and a written quote.
Call Carver Gate Repair in East Los Angeles Today
When your gate won’t open, you’re not just inconvenienced. You’re locked out of your own driveway, or your property is sitting open to the street. We’ll send a background-checked, uniformed technician to East Los Angeles with the right parts and the right training. You’ll get a written price before any work begins, and a written one-year guarantee on the repair. Call (469) 530-2485 now and speak to a live person, any hour, any day. Estimates are free.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.