Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Whitney, NV
Gate repair in Whitney, NV comes down to one thing: your gate has to open when you need it to and close when you want it to. We’re Carver Gate Repair, and we work exclusively on gates and gate motors. Every job gets a written price before work starts, a background-checked technician on site, and a written guarantee good for a full year. When a Whitney gate fails, the problem is usually the motor, a limit switch, or a hinge that’s been fighting the desert wind longer than it should. Call (469) 530-2485 and a live person answers, day or night.
Why Whitney Homes Are Different
Whitney sits in the unincorporated patch of Clark County between Las Vegas and Henderson, and the gates here take a beating from the same two things every summer: sustained 100-degree heat and fine dust that gets into everything. That dust is the quiet killer of gate motors. It settles on limit switches, works its way into gear housings, and after enough cycles the motor strains, trips, or just refuses to move. A Whitney gate that’s never been opened and inspected tends to fail in August, not February.
The housing stock here is mostly single-story residential with a mix of older wrought-iron driveway gates and newer powder-coated steel. Wrought-iron gates from the 1980s and 1990s are heavy, and many of them are riding on hinges and rollers that were never upgraded. That weight shortens motor life. Whitney also has a fair number of properties where the gate sits at the end of a long gravel or decomposed-granite drive, which means more dust and more wear on the track. Homes along Boulder Highway see heavier traffic and more frequent open-close cycles than quiet side streets off Sunset Road. Both change how fast a gate motor ages.
Our Main Whitney Services
The calls we get most in Whitney fall into three buckets: a gate that won’t open or close, a motor that quit, and a full replacement. Each has its own page with pricing and detail.
Gate Repair in Whitney
A Whitney gate repair usually means one of a handful of things: a hinge that sagged, a wheel that seized, a track that drifted out of square, or a limit switch that’s no longer telling the motor where to stop. The fix depends on what’s actually worn, and that’s why we inspect first and quote second. High-tension springs and cables on heavier gates are genuinely dangerous to release without the right tools, so we don’t recommend handling them yourself. Our Gate Repair in Whitney page walks through the common jobs and what they cost.
Gate Installation in Whitney
New gate installation starts with the same questions every time: what’s the gate weight, what’s the slope, where’s the power, and how wide is the opening. Whitney’s flat lots make most installs straightforward, but holes near the edge of a property sometimes sit on caliche, a concrete-hard soil layer that makes post-setting slower than it looks. We measure, order, and schedule – this is not a same-day job. The Gate Installation in Whitney page covers what a full installation includes and what to budget.
Gate Motor Repair in Whitney
When a Whitney gate motor fails, the first thing we check is whether it’s actually the motor or the control board, the loop detector, or the power supply feeding it. Dust is the root cause in a lot of local jobs, followed by moisture creeping into the housing after a rare hard rain. We service swing operators, slide operators, and articulating-arm setups. If you’re troubleshooting a dead motor, call before you open the housing – capacitors inside can hold a charge even with the power off. Details and pricing are on the Gate Motor Repair in Whitney page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Whitney
We carry parts and service motors from FAAC, BFT, Linear, and Viking, among others. Most common Whitney replacements are stocked in the Las Vegas office and can be on a truck the same day. If a motor is too far gone to rebuild, we quote the replacement in writing before ordering anything. See our brands for the full list.
Pricing for Gate Company in Whitney, NV
Whitney prices track the Las Vegas Valley market. The figures below are the ranges we quote most often here.
| Service | Typical range in Whitney |
|---|---|
| Service call / diagnostic fee | $90 – $140 |
| Hinge replacement (per set) | $250 – $550 |
| Wheel or roller replacement | $180 – $350 |
| Track adjustment or realignment | $200 – $450 |
| Limit switch replacement | $220 – $400 |
| Loop detector replacement | $300 – $600 |
| Gate motor repair (labor + common parts) | $350 – $800 |
| Full gate motor replacement (installed) | $1,400 – $3,200 |
| New gate installation (standard single-drive) | $2,800 – $6,500 |
| Articulating-arm operator install | $2,200 – $4,500 |
What moves the number in Whitney is usually the gate’s weight and how far the power has to be run from the panel to the operator. Every price is quoted and agreed in writing before any work starts, so the number on paper is the number you pay.
Neighborhoods We Serve in Whitney
We run calls across all of Whitney, from the older streets near Boulder Highway to the newer builds on the east side. Most jobs we can reach the same day if you call before noon.
- Boulder Highway corridor
- Sunset Road area
- East Whitney residential streets
- Properties off Russell Road
- Communities near Sam Boyd Stadium
Service Area – Cities Near Whitney
Whitney sits right in the middle of the Las Vegas Valley, so we also serve Las Vegas, NV, Henderson, NV, North Las Vegas, NV, and Enterprise, NV. Scheduling is coordinated from the brand’s Las Vegas office, with crews working Whitney locally. If you’re just outside Whitney, call and we’ll tell you straight whether we can get there today or tomorrow.
Serving Whitney, NV – Our Local Coverage Area
We’re based in the Whitney area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Whitney
If you call before noon, we can usually get a technician to Whitney the same day. Afternoon calls are typically next morning. Real answer: it depends on the truck schedule, which our dispatcher can confirm in the time it takes you to describe the problem. Call (469) 530-2485.
Most gate repairs and replacements in unincorporated Clark County don’t require a permit, but if your gate is tied to an HOA, the HOA almost always has a say in design, height, and color before you order anything. We’ll help you nail down the requirements before you spend a dollar on hardware.
We run the low-voltage power to the operator and handle all the gate-side wiring as part of the job. If your panel needs a new dedicated circuit or the run is unusually long, we’ll tell you up front and coordinate the licensed electrical work so the job still moves on schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Whitney Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.