Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Frisco
Gate repair in Frisco typically costs between $185 and $650 for most hinge, post, and operator fixes, with full gate motor replacement running $750 to $1,400. Most jobs are completed in a single visit, and we answer the phone live around the clock at (469) 530-2485. If you live off Eldorado Parkway, in the Stonebriar area, or any of the newer subdivisions west of the Dallas North Tollway, our crews know the gate failures specific to this city’s soil and HOA requirements.
Frisco’s Blackland Prairie clay expands when wet and shrinks when dry. That movement is hard on gate posts, and it’s the reason so many swing gates in this city fail at the hinge post instead of the panel itself. We account for that before we touch a hinge. That’s the kind of local knowledge that changes how a repair holds up two seasons later.
Why Carver Gate Repair Is Frisco’s Preferred Gate Repair Company
Frisco homeowners tell us the same thing: they’ve been burned by technicians who show up late, quote one number, then pad the invoice after the gate is apart. We don’t work that way. Every job starts with a written price delivered before any work begins. The number does not move at the door. Lonnie Burke, who runs Carver Gate Repair, enforces that standard on every call we dispatch in Frisco.
Our technicians are background-checked and uniformed. When they arrive at a home near Lebanon Road or The Trails, the homeowner knows exactly who is walking up the driveway. That matters when the job is at the entrance to your property. We serve all of Frisco: 75033, 75034, 75035, 75036, and the eastern side of 75078. Calls are answered by a live person 24 hours a day, seven days a week, weekends and holidays included.
Every repair carries our 365-Day Done Right Promise in writing. If the repair fails within a year, we return and fix it at no charge. No deduction for parts, no pro-rated labor, no argument. That guarantee is part of The Garrison Standard we’ve operated under since 2008, and it applies to every gate we touch in Frisco.
Metal Gate Repair in Frisco
Metal Gate Repair in Frisco means dealing with ornamental steel and aluminum gates that are rusting at the weld points, sagging on their hinges, or binding because the post has moved. In neighborhoods like Newman Village and Phillips Creek Ranch, HOA rules often require a metal finish that matches the perimeter fence, which means reinforcement has to be done from the hinge side, not by strapping a visible brace across the face. We handle it accordingly.
Typical metal gate repair in Frisco runs $195 to $520, depending on whether we’re replacing hinges and bushings, cutting out and re-welding a rusted bottom rail, or resetting a post that has heaved in the clay. Weld and rust repair on an ornamental steel gate generally lands between $250 and $450. A full post reset with new concrete footing goes higher, usually $550 to $850, because of the excavation and the need to let the footing cure before re-hanging the panel.
Hinge and Post Work
When a steel gate drags or won’t latch, the first thing we check is whether the hinge post still sits plumb. In Frisco’s expansive clay, a post set with a shallow concrete collar can move a half-inch in one wet spring. That half-inch is enough to throw the latch out of alignment. We reset the post to proper depth and re-shim the hinges rather than bending the frame to compensate.
Rust Repair on Ornamental Gates
North Texas gets enough humidity and rain that weld joints on steel gates start to rust within a few years if the original powder coat was scratched during installation. We grind out the rust, treat the steel, and re-weld the joint before priming and painting to match. This is standard work on gates throughout Frisco’s 75034 and 75035 zip codes.
Wood Gate Repair in Frisco
Wood Gate Repair in Frisco usually comes down to two things: a hinge post that has heaved in the clay, or a frame that has absorbed too much moisture and started to sag under its own weight. Cedar and pine gates throughout Stonebriar, The Trails, and Lawler Park are built to match backyard fences, and many were installed with shallow footings that don’t survive the wet-dry seasonal cycle.
Expect to pay $165 to $475 for most wood gate repair in Frisco. Replacing a sagging hinge post with a proper footing runs $350 to $650. Reinforcing a wood gate without replacing the panel, which often means adding a steel anti-sag kit and re-hanging the hinges, typically lands between $185 and $400. When the wood itself is too far gone, a new frame with the existing pickets reattached falls in the $500 to $700 range.
Anti-Sag Reinforcement
Wood gates sag because the diagonal brace was installed wrong or the frame joints have loosened. We install a steel anti-sag kit that pulls the top hinge-side corner up and holds it, then re-tension the gate so it rises slightly toward the latch. That slight rise is the margin that keeps it clearing the driveway a year from now.
Post Footing and Reset
In Frisco, a wood gate post should be set below the frost line and surrounded by concrete that extends past the clay zone that moves. We do it right: dig out the old collar, set the post deeper, and slope the concrete away from the wood so water doesn’t sit against it. Done properly, a reset post holds level through multiple winters.
Trusted Brands We Service in Frisco
Our technicians carry parts and know-how for the operators already installed on Frisco driveways: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate runs on a Viking or DoorKing operator and the arm has lost travel or the limit switch keeps tripping, we bring the right replacement parts on the first truck. For Ghost Controls kits popular in newer Frisco builds, we stock control boards and remotes locally so there’s no week-long wait on a back-ordered part.
Common Gate Repair Problems We See in Frisco Homes
- Hinge post heave from Blackland Prairie clay. Shallow footings let the post move seasonally, which makes the panel sag and bind even when the hinges and operator are fine. We see this constantly in Frisco subdivisions built on the original prairie soil.
- Entrapment-protection failures. Photo-eyes get knocked out of alignment by mowers, kids, or just wind, and edge sensors are rarely tested after installation. When the gate no longer reverses on contact, it violates UL 325 safety requirements and needs attention quickly.
- Rack-and-pinion and loop-detector wear. Sliding gates lose mesh on the drive rack over time, which makes them grind and stall. Loop detectors at the driveway apron get damaged by vehicle traffic and stop triggering the gate to open or close reliably.
- Operator limit-switch and capacitor failures. North Texas heat takes a toll on gate operator electronics. Limit switches drift, capacitors dry out, and boards overheat. These are repairable, but the parts have to be the right match for the brand and model already on the gate.
Pricing for Gate Repair in Frisco, TX
A basic hinge replacement or realignment in Frisco runs $185 to $275. Post resets run $350 to $850 depending on the gate’s weight and whether the footing needs full excavation. Gate operator repair lands between $295 and $650, while a new operator installed with safety edges and a full reversal test runs $750 to $1,400. The written price we give you before the work starts is the price on the invoice. Estimates are free, and we’ll tell you exactly what the repair needs and what it costs before we open the toolbox.
What shifts the number: the size and weight of the gate, the condition of the footings, whether we need parts for a specific operator brand, and how much of the existing structure can be reused. We’d rather repair a salvageable gate than sell you a replacement, and the price reflects that.
We Also Serve Cities Near Frisco
Beyond Frisco, our crews cover Prosper, Aubrey, Little Elm, and Celina. If you’re on the north edge of Frisco near Highway 380 or off Preston Road toward Prosper, you’re still in our regular service area. Call (469) 530-2485 and we’ll schedule a time that works. You can also see our full Gate Repair service details or learn more about Frisco coverage.
Serving Frisco, TX – Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Frisco
Usually it’s the hinge post, not the panel. Frisco’s Blackland Prairie clay expands and contracts with moisture, and a shallow post footing will heave enough to make a gate drag on concrete even when the hinges, frame, and operator are all in good shape. We check the post plumb first, then the hinge bushings, then the panel’s diagonal bracing. Fixing the post often solves the whole problem. Call (469) 530-2485 for a free evaluation at your address.
Yes. Any automatic gate operator installed after UL 325 standards took effect must have a monitored entrapment-protection system: photo-eyes, a reversing edge, or both. If your Frisco gate doesn’t reverse when it hits a trash can or a child’s bike, the system has failed and needs service. We test entrapment protection as part of every automatic gate repair and can bring a system back into compliance.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our trucks stock common replacement parts for Viking, DoorKing, Elite, and Ghost Controls operators, which are frequently found on Frisco driveways. Matching the right parts to the existing brand and model prevents a lot of repeat failures. Call (469) 530-2485 and have your operator’s brand and model number handy if you can.
Yes, in most cases. If the wood is structurally sound and the hinges haven’t torn loose, we install a steel anti-sag kit behind the pickets and re-hang the gate so it rises slightly toward the latch. That preserves the look your HOA requires while fixing the drag. If the post has heaved, that has to be reset first or the reinforcement won’t hold. A typical reinforcement runs $185 to $400.
A loop detector is a wire loop buried in the driveway asphalt or concrete that senses a vehicle’s metal mass and tells the operator to open. When the loop gets cracked, cut, or shifted by ground movement, the detector can false-trigger and make the gate open or close with no car present. We diagnose the loop with a meter and repair or replace the detector at the apron. If your gate is cycling on its own, call us at (469) 530-2485 and we’ll trace the signal.
When you need gate repair in Frisco and you want it done without the runaround, call (469) 530-2485. A live person answers, we schedule around your day, and the price you’re quoted is the price you pay. Written guarantee, full year, no fine print.
Written by Lonnie Burke, Owner at Carver Gate Repair.