Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Gilroy
Gate repair in Gilroy usually costs between $185 and $1,400 depending on what failed. A sagging hinge post runs $285 to $650. A gate operator replacement runs $900 to $1,600 installed. Most repairs here get done in one visit, and we answer the phone at (469) 530-2485 around the clock. We dispatch crews to Gilroy neighborhoods from the San Francisco Bay Area office, and our technicians know the local soil, the local gate brands, and the failure points that show up most often in this part of Santa Clara County. If your gate drags, won’t open, or cycles without stopping, call us for a written price before any work starts.
Why Carver Gate Repair Is Gilroy’s Preferred Gate Repair Company
We work to The Garrison Standard, and that means three things on every Gilroy job: a written price before work starts, a background-checked uniformed technician, and a written guarantee on every repair that holds for a full year. Homeowners here have dealt with enough no-shows and moving numbers. We don’t do that. Phones are staffed by a live person 24 hours a day, every day, including weekends and holidays, so when a gate fails on a Saturday morning off Santa Teresa Boulevard, someone actually picks up.
Lonnie Burke runs the crew, and the standard he holds is simple: the repair works, the site stays clean, and the price doesn’t move at the door. Our Gate Repair team is trained on nine motor brands, which matters in Gilroy because neighborhoods here run everything from older LiftMaster swing operators to newer Ghost Controls and Viking units on rural acreage properties. We carry the common parts locally, so most Gilroy repairs finish the same day the problem is diagnosed.
Metal Gate Repair in Gilroy
Metal Gate Repair in Gilroy covers steel and wrought iron gates, from sagging swing panels to bent hinge leaves, rusted posts, and broken welds. Gilroy’s clay-heavy adobe soil expands and contracts hard between the wet season and the dry summer, which means hinge posts and operator post footings shift and settle more than they do in sandier South County soils. A metal gate that drags the ground here is usually a post problem, not a panel problem. Expect to pay $285 to $650 for a hinge post reset with a deeper concrete footing, and $150 to $400 for rust repair and re-welding on panels or pickets.
Hinge Post Reset and Sag Correction
When a metal swing gate sags, the panel gets blamed, but the post is usually what moved. We pull the post, dig the footing deeper, pour new concrete with proper drainage, and re-hang the gate so it sits square. In Gilroy, that drainage detail matters more than it does in most places because adobe clay holds water against the post base.
Weld and Rust Repair
Metal gates in Gilroy pick up rust at the bottom rail, around hinge plates, and anywhere sprinklers hit them. We grind out the rust, weld cracked joints, and apply a cold-galvanizing treatment before painting. A typical rust-and-weld repair runs $150 to $400 depending on how many joints need work.
Wood Gate Repair in Gilroy
Wood Gate Repair in Gilroy means dealing with posts that rot at the soil line and panels that sag from loose joinery. Older homes near downtown and along Church Street often have redwood or pressure-treated gates that have been through twenty years of wet winters and hundred-degree Augusts. The wood splits, the post bottoms soften, and the gate starts catching on the driveway. Repair costs run $200 to $550 for a post replacement and $150 to $450 for panel reinforcement, straightening, and hardware replacement.
Post Replacement in Clay Soil
Wood posts rot from the bottom up in Gilroy because winter rain soaks into the clay and sits against the post. We set new posts in concrete with gravel at the base so water doesn’t pool, which extends the life of the repair by years. This isn’t an upgrade we suggest only when asked; it’s standard practice here.
Panel Reinforcement and Hardware
When the panel is still sound but the gate sags, we re-square the frame, add corner bracing, and replace worn hinges and latches. Many Gilroy homeowners choose this over a full gate rebuild when the wood is still structurally good. The work takes a few hours and costs $150 to $450.
Trusted Brands We Service in Gilroy
Our technicians carry parts for Linear, Ghost Controls, and DoorKing systems, and we service all nine major operator brands in Gilroy. That means when your existing operator is one of those and the control board or limit switch fails, we can often repair it the same day instead of telling you to replace the whole unit. For rural Gilroy properties east of 101 and up toward the hills, we commonly see Ghost Controls and Linear solar-capable operators. For larger estate gates, DoorKing and Viking are the usual installs. We match the right parts and know-how to the system already on your property, and we stock the common components locally so turnaround stays fast.
Common Gate Repair Problems We See in Gilroy Homes
- Hinge posts and operator post footings shifting in expansive clay soil. Gilroy’s adobe soil swells in winter and shrinks in summer. Posts move, swing gates sag, and the gate drags the ground. The fix is a deeper footing with drainage, not a panel adjustment.
- Safety photocells and edge sensors knocked out of alignment. When a sensor gets bumped or the sun heats the gate frame, the operator keeps cycling or refuses to close. UL 325 compliance requires working entrapment protection, and we re-aim and test every sensor on every job.
- Rack and pinion or loop detector failures on slide gates. Dry-season dust from Gilroy’s unpaved driveways and rural roads builds up in the track and gums up the rack. The gate grinds, stalls, or stops mid-travel. We clean the track, adjust the rack, and test the loop detector.
- Gate operator motors worn out from high heat cycles. Gilroy summers put extra strain on operators that cycle multiple times a day. Capacitors fail, limit switches drift, and control boards burn out. Replacing the operator runs $900 to $1,600 installed, and we quote the full number before any work starts.
Pricing for Gate Repair in Gilroy, CA
A typical gate repair in Gilroy runs $185 to $650. Here’s the breakdown by job type. Hinge post reset: $285 – $650. Metal gate weld and rust repair: $150 – $400. Wood post replacement: $200 – $550. Gate operator replacement: $900 – $1,600 installed. Safety photocell replacement: $165 – $325. Rack and pinion cleanup and adjustment: $185 – $385. The written price is delivered before any work starts, and the number doesn’t move at the door. You get a full-year written guarantee on every repair. Call (469) 530-2485 for a free estimate, and if the repair fails inside the guarantee window, the second visit is free.
We Also Serve Cities Near Gilroy
Our Gate Repair in Gilroy crews also cover San Martin, Morgan Hill, Los Gatos, and Campbell. If you live just over the city line, the same phone number, the same written-price standard, and the same full-year guarantee apply. Call (469) 530-2485 and we’ll get you scheduled.
Serving Gilroy, CA – Our Local Coverage Area
We’re based in the Gilroy area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Gilroy
The panel is almost never the root cause. Gilroy’s clay-heavy adobe soil expands in winter and contracts in summer, so the hinge post shifts and the gate sags. Fixing the panel without resetting the post is a temporary patch. The real repair is pulling the post, digging the footing deeper, pouring fresh concrete with drainage, and re-hanging the gate square. That runs $285 – $650. Call (469) 530-2485 for an exact quote.
Yes. Every automatic gate operator installed in Gilroy must have working entrapment protection, which means safety photocells and edge sensors that meet UL 325 standards. If the photo-eyes are knocked out of alignment or the edge sensor is dead, the operator should be serviced before it’s used. We re-aim and test every sensor on every repair, and a photocell replacement runs $165 – $325. Call (469) 530-2485 to schedule a check.
Most gate operator installations in Gilroy take one full day, including groundworks, power connection, safety edges, and reversal testing. If the job involves a new concrete pad, longer conduit runs, or trenching for power, it can take two days. We never promise same-day turnaround on an installation; we quote the full scope and timeline in writing before work starts. Call (469) 530-2485 for a free measure and written price.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Gilroy we see a lot of Linear and Ghost Controls on rural properties and DoorKing and Viking on larger estate gates. We carry common parts for these locally, so many repairs finish the same day. Call (469) 530-2485 and tell us what operator you have.
Yes. Rural Gilroy properties east of 101 and up toward the hills often use solar gate openers, and we install and service Ghost Controls and Linear solar-capable units routinely. The main considerations here are panel placement for winter sun angles, battery capacity for cloudy stretches, and proper grounding. We quote the full system cost in writing before any work starts. Call (469) 530-2485 for a free estimate.
Contact Carver Gate Repair in Gilroy
If your gate sags, drags, won’t open, or cycles without stopping, call (469) 530-2485. We’ll send a background-checked, uniformed technician to your Gilroy property, diagnose the problem, and put the price in writing before any work starts. Every repair carries a full-year written guarantee, and if it fails inside that year, the second visit is free. The phone is answered by a live person 24 hours a day, every day. Call now for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Gilroy and surrounding communities.