Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Kyle
Gate repair in Kyle usually comes down to one of three things: a hinge post that’s moved in the clay soil, a gate operator that’s lost its settings or power, or a weld that’s finally let go after years of wind. Most Kyle jobs run $185 – $620 for a repair, and we can typically get a technician to most Kyle neighborhoods within an hour when you need it now. We work on iron gates, steel tube gates, and motorized driveway systems across the IH-35 corridor. Call (469) 530-2485 and you’ll get a live person who can tell you what to expect before anyone rolls a truck.
Why Carver Gate Repair Is Kyle’s Preferred Gate Repair Company
Kyle homeowners call us because the person who answers the phone is the same level of professional as the technician who shows up. Every one of our technicians is background-checked and uniformed, and we operate under The Garrison Standard: a written price before work starts, a written guarantee on every repair good for a full year, and a free second visit if the fix doesn’t hold. That’s not a promo. It’s the way Lonnie Burke has run this crew since 2008.
We don’t send a general handyman to look at a gate problem and wing it. We send someone who has rebuilt hinges, re-seated posts, and reprogrammed gate operators in Buda, San Marcos, and Kyle for years. The technician who arrives at your home knows what DoorKing and Viking systems are supposed to sound like when they run right, and what they sound like when a limit switch is failing. That’s the difference between a repair that lasts and one you’re paying for again in six months.
If your gate won’t open at 6:30 a.m. and you’re stuck in the driveway, call us. A live person answers around the clock, every day of the year. No voicemail box, no answering service that takes a message and hopes someone calls back. We dispatch to Kyle directly.
Wrought Iron Gate Repair in Kyle
Wrought iron gate repair in Kyle usually involves more than the panel itself. The gate can look straight and still bind at the latch because the hinge post has shifted in the expansive clay that runs under much of east Kyle. We start every iron gate job by checking the post footing and the hinge alignment before we ever weld or straighten anything. A typical wrought iron repair in Kyle runs $240 – $580 depending on whether we’re re-hanging the gate, repairing a cracked scroll, or rebuilding a hinge post.
Post Reset and Hinge Rebuild
In Kyle’s clay-heavy soils, the most common iron gate failure we see is a hinge post that’s shifted with the ground. The gate sags, the latch won’t catch, and the operator starts tripping its obstruction sensor. We dig out the old footing, re-set the post in new concrete, and re-hang the gate so it swings clean without binding.
Scroll and Weld Repair
Rust and vibration eventually crack the decorative scrollwork and pickets on iron gates. We cut out the bad section, weld in matched material, and grind it smooth so the repair doesn’t look like a patch. We also treat surface rust before it gets structural. If the crack has reached a load-bearing member, we’ll tell you straight whether the gate is worth saving or whether replacement is the better use of your money.
Metal Gate Repair in Kyle
Metal gate repair in Kyle covers steel tube driveway gates, ranch-style gates on acreage off FM 1626, and pedestrian gates on residential lots. The failure pattern here is different from ornamental iron. Steel tube gates are heavier, and when a post moves in Kyle’s clay, the gate can drop hard enough to snap a weld or bend a hinge barrel. Metal gate repairs in Kyle typically cost $185 – $475 depending on the frame condition and whether the post needs to be re-set.
Frame Straightening and Reinforcement
A steel gate that drags at the latch side has usually twisted at the frame. We jig the gate, straighten the frame, and reinforce the corners with gussets where the design allows. This stops the problem at the source instead of just lifting the gate off the ground and calling it fixed.
Latch and Lock Alignment
Steel gates that have shifted slightly won’t close all the way, which means the lock won’t engage and the gate operator won’t get a clean closed signal. We re-align the latch, adjust the receiver, and test the full travel several times. If you have an operator on the gate, we also re-test the close force and safety reversal.
Trusted Brands We Service in Kyle
Most Kyle gates with operators are running LiftMaster, Linear, or Viking equipment, and we stock common replacement parts for all three, plus Ghost Controls for the lighter swing gates on acreage properties. That means we’re not ordering a limit switch and asking you to wait a week while your gate sits open. Our techs are trained on every brand we touch, so a Viking swing operator gets treated like a Viking, not like a generic anything. If your gate motor is doing something strange, call (469) 530-2485 and describe the symptom. We can often tell you over the phone whether it’s a simple adjustment or a board-level failure.
On a recent job in the Bunton Creek neighborhood, our tech diagnosed a sagging 14-foot wrought iron swing gate that had dropped almost two inches at the latch side. The panel was sound. The real problem was the hinge post footing, which had settled with the black clay soil after a wet spring. We pulled the gate operator, re-leveled the post with a new concrete footing, replaced the LiftMaster arm, and re-ran reversal testing on the safety photocells. The gate now swings clean and the keypad entry works without the binding that had been tripping the operator’s obstruction sensor.
Common Gate Repair Problems We See in Kyle Homes
Kyle’s position on the IH-35 corridor puts many properties on the eastern edge of the Edwards Aquifer’s recharge zone, where clay-heavy expansive soils and frequent wet-dry cycles shift gate post footings more than in the thinner limestone soils to the west. A gate can be mechanically fine and still bind because the ground under the hinge post has moved. Here’s what we see most often:
- Gate sag that starts at the hinge post, not the panel. Kyle’s expansive clay moves the post footing, the gate binds, and the operator strains. You can replace the panel and still have a sagging gate if the post underneath it isn’t addressed.
- Operator failures on long rural driveway runs. Solar gate openers and low-voltage transformers on acreage lots off FM 1626 and near Plum Creek are often undersized, or the loop detector wiring has corroded from moisture in the soil. The operator works intermittently, then quits.
- Safety sensor faults from dirt daubers and misalignment. Kyle’s warm seasons bring insects that build nests inside photocell housings, and a post that shifts just half an inch knocks the beam out of alignment. The operator then refuses to close or reverses, which is an entrapment protection fault under UL 325, not just a nuisance.
- Welds that fail from years of wind. The open country along I-35 means steady wind loading on large steel gates. Stress concentrates at the hinge side, and eventually a weld cracks or a hinge barrel bends.
Pricing for Gate Repair in Kyle, TX
You should know what to write the check for before we ever pull a tool off the truck. Here’s what Kyle residents typically pay with us:
- Wrought iron gate repair: $240 – $580
- Metal gate repair: $185 – $475
- Gate realignment without post work: $140 – $260
- Hinge and post repair (including concrete footing): $300 – $620
- Gate operator repair (parts included): $195 – $450
- Full gate operator replacement: $850 – $1,800 depending on brand, horsepower, and safety-edge requirements
We don’t quote one number over the phone and show up with another. The written price you sign off on is the price you pay. If we open a gate operator and find additional damage, we stop and show you before doing anything. Estimates are free. Call (469) 530-2485 to schedule one.
We Also Serve Cities Near Kyle
Our Gate Repair team covers Kyle and the surrounding corridor, so if you have a property just outside the city line, that’s still our territory. We regularly dispatch to Kyle plus Buda, San Marcos, Dripping Springs, and Austin. If your gate is down in any of these areas, call (469) 530-2485 and we’ll get you on the schedule.
Serving Kyle, TX – Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kyle
Most sagging gates in Kyle don’t need to be replaced. The problem is usually the hinge post footing, which has moved in the expansive clay soil. We dig out the old footing, re-set the post in new concrete, and re-hang the gate. You need a new gate only if the frame is rusted through or cracked beyond a straight repair. Call (469) 530-2485 and we’ll tell you which one you have.
Yes. All automatic gate operators in Kyle are required to meet UL 325 entrapment protection standards, which means working photocells or contact edges that stop and reverse the gate when something is in the path. If your gate reverses for no reason, a sensor fault is usually the culprit. We test every sensor on every repair.
Yes. Our technicians are trained on LiftMaster and FAAC equipment, along with Linear, Viking, DoorKing, Ghost Controls, BFT, Elite, and Mighty Mule. We stock common parts for the brands we see most in Kyle, so most operator repairs are done the same day. Call (469) 530-2485 with your model number and we can give you a realistic idea of cost before we come out.
A proper gate installation includes the groundworks, the post footings, the gate panel, the operator and arm, the safety edges and photocells, the power run, and the control board programming. We also test the reversal force and the safety loop. Installation is measured, ordered, and scheduled – it’s not a same-day job, and anyone who promises that is cutting corners. A free measure and written price is the first step.
Nine times out of ten in Kyle, that’s a photocell misalignment or an obstruction sensed by the safety edge. A post that shifted in the clay knocked the sensor out of line, or insects are blocking the lens. The operator is doing what it’s supposed to do – refusing to close on an unsafe path. We clean, re-align, and re-test the full safety system on every operator call. Call (469) 530-2485 for an exact diagnosis.
Contact Carver Gate Repair in Kyle
If your gate is binding, sagging, or dead in the driveway, call us. You’ll get a live person who can answer your questions, explain what a repair should cost, and schedule a technician to come to your Kyle home. Every quoted price is in writing before work starts. Every repair is guaranteed for a full year in writing. Call (469) 530-2485 for a free estimate, or reach out to get on the schedule today.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.